DigitaLinx DL-HDM88A-H2 Manuale utente

Rev 180926 Phone: 719-260-0061
Toll-Free: 800-530-8998
Fax: 719-260-0075
DL-HDM88A-H2 Owners Manual
11675 Ridgeline Drive
Colorado Springs, CO
80921

DL-HDM88A-H2 Installaon Guide
2
Important Safety Instrucons
»Please completely read and verify you understand all instrucons in this manual before operang this equipment.
»Keep these instrucons in a safe, accessible place for future reference.
»Heed all warnings.
»Follow all instrucons.
»Do not use this apparatus near water.
»Clean only with a dry cloth.
»Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliers)
that produce heat.
»Use only accessories specied or recommended by Intelix.
»Explanaon of graphical symbols:
◊ Lightning bolt/ash symbol: the lightning bolt/ash and arrowhead within an equilateral triangle
symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the
product enclosure which may be of sucient magnitude to constute a risk of shock to a person or
persons.
◊ Exclamaon point symbol: the exclamaon point within an equilateral triangle symbol is intended
to alert the user to the presence of important operang and maintenance (servicing) instrucons
in the literature accompanying the product.
»WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR
MOISTURE AND OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHOULD NOT BE PLACED ON THIS APPARATUS.
»Use the mains plug to disconnect the apparatus from the mains.
»THE MAINS PLUG OF THE POWER CORD MUST REMAIN READILY ACCESSIBLE.
»Do not defeat the safety purpose polarized or grounding-type plug. A polarized plug has two blades with one wider
than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong
is provided for your safety. If the provided plug does not t into your outlet, consult an electrician for replacement of
your obsolete outlet. Cauon! To reduce the risk of electrical shock, grounding of the center pin of this plug must be
maintained.
»Protect the power cord from being walked on or pinched parcularly at the plugs, convenience receptacles, and the
point where they exit from the apparatus.
»Do not block the air venlaon openings. Only mount the equipment per Intelix’s instrucons.
»Use only with the cart, stand, table, or rack specied by Intelix or sold with the equipment. When/if a
cart is used, use cauon when moving the cart/equipment combinaon to avoid injury from p-over.
»Unplug this apparatus during lightning storms or when unused for long periods of me.
»Cauon! Shock Hazard. Do not open the unit.
»Refer to qualied service personnel. Servicing is required when the apparatus has been damaged in any way, such as
power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate normally, or has been dropped.

DL-HDM88A-H2 Installaon Guide
3
Table of Contents
Product Overview��������������������������������������������������������������������������������������������������������������������������������������� 4
Product Overview��������������������������������������������������������������������������������������������������������������������������������������� 4
Front and Rear Panels��������������������������������������������������������������������������������������������������������������������������������� 5
Front Panel���������������������������������������������������������������������������������������������������������������������������������������������������� 5
Rear Panel����������������������������������������������������������������������������������������������������������������������������������������������������� 6
Installaon Instrucons������������������������������������������������������������������������������������������������������������������������������ 7
Mount the Matrix ����������������������������������������������������������������������������������������������������������������������������������������� 7
Rack Mounng Instrucons....................................................................................................................7
Connect Sources�������������������������������������������������������������������������������������������������������������������������������������������� 7
Connect Displays������������������������������������������������������������������������������������������������������������������������������������������� 7
Applying Power ��������������������������������������������������������������������������������������������������������������������������������������������� 8
Switching Capabilies ����������������������������������������������������������������������������������������������������������������������������������� 8
Connect External IR Control �������������������������������������������������������������������������������������������������������������������������� 8
Connect RS232 Control���������������������������������������������������������������������������������������������������������������������������������� 9
Connect Ethernet (Web Browser) Control ����������������������������������������������������������������������������������������������������� 9
Router Connecon ...............................................................................................................................10
Crossover Cable Connecon .................................................................................................................10
Web Browser Control ...........................................................................................................................10
Web Browser Control / System Sengs ���������������������������������������������������������������������������������������������������� 11
Matrix Control���������������������������������������������������������������������������������������������������������������������������������������������11
Connecng to Web Control Interface ...................................................................................................11
Audio / Video Switching .......................................................................................................................12
Saving and Loading Presets ..................................................................................................................13
Changing System Status........................................................................................................................13
API Log ..................................................................................................................................................13
Admin Sengs ��������������������������������������������������������������������������������������������������������������������������������������������14
Adjusng EDID Sengs ........................................................................................................................14
Adjusng HDCP Support .......................................................................................................................18
Viewing HDCP Input and Output Status ...............................................................................................18
Changing the Audio and Video Alias Names ........................................................................................19
Changing Preset Names ........................................................................................................................20
Changing Network Address Sengs .....................................................................................................20
Changing Password for Matrix Control and Admin Seng ..................................................................20
Updang Web Interface .......................................................................................................................21
Uploading a Custom Web Logo ............................................................................................................21
Factory Default and Reboot ..................................................................................................................21
API Log Show / Hide .............................................................................................................................21
EDID Management ����������������������������������������������������������������������������������������������������������������������������������� 22
IR Remote Control ������������������������������������������������������������������������������������������������������������������������������������ 23
RS232 and TCP/IP Control ������������������������������������������������������������������������������������������������������������������������� 24
HDCP Management Commands �����������������������������������������������������������������������������������������������������������������24
Matrix Roung Commands �������������������������������������������������������������������������������������������������������������������������25
Audio Roung Commands���������������������������������������������������������������������������������������������������������������������������26
System Commands��������������������������������������������������������������������������������������������������������������������������������������27
Technical Specicaons ���������������������������������������������������������������������������������������������������������������������������� 28

DL-HDM88A-H2 Installaon Guide
4
The DigitaLinx DL-HDM88A-H2 is an eight input by eight output HDMI 2.0 matrix switcher with HDCP
2.2 support and capable of handling resoluons up 4K@60Hz 4:4:4 / 8 bit color with stac and dynamic
HDR output support for each channel. The matrix features advanced independent EDID management
control for each HDMI input as well as an Easy EDID analyzer. The analog and digital audio outputs
on the DL-HDM88A-H2 can be set to follow the HDMI video route or can be independently routed
either by API or web control interface. Built in re-clocking circuitry ensures the switcher is backwards
compable with sources with older HDMI version chip sets.
The DL-HDM88A-H2 can be controlled via front panel buons, front panel IR, external IR, remote IR,
RS232, and Ethernet. The matrix includes a simple IR remote control to allow IR switching. The matrix
also features a full command set for RS232 and Ethernet control with third party control systems, plus
control via web user interface.
Product Overview
Product Overview
• DL-HDM88A-H2 Matrix Switcher
• Quick Install Guide
• (1) Matrix IR Remote
• (1) IR Receiver (38KHz)
• (1) AC power adapter with US, UK, EU and AU power plugs
• (8) Phoenix Male Connector (3.5mm, 3 Pins)
• (2) Rack mounng clips with mounng screws

DL-HDM88A-H2 Installaon Guide
5
Front and Rear Panels
Front Panel
1. OUTPUT CHANNEL INDICATOR - Indicates input for output port 1-8
2. IR - Receives signals from IR remote
3. INPUT 1-8 - Input 1-8 selecon buons
4. OUTPUT 1-8 - Output 1-8 selecon buons
5. CLEAR - Clear buon, clears the selecon operaon
6. TAKE - Take buon, implements input selecon
7. STORE - Store buon, stores the matrix routes to preset
8. RECALL - Recall buon, loads the matrix routes from preset
9. POWER SWITCH - Power switch for on/o control of matrix

DL-HDM88A-H2 Installaon Guide
6
Rear Panel
1. AC - AC power cord input
2. HDMI IN (1-8) - HDMI input ports for connecons to HDMI video sources
3. HDMI IN (1-8) - HDMI output ports for connecons to displays
4. IR EXT. - 3.5mm IR input port for connecon to IR extension cable
5. EDID - EDID switch for EDID management
6. FIRMWARE - USB port rmware updates
7. LAN - RJ45 port for LAN connecon to network or control system for telnet control
8. RS232 - DB9 port for connecon to control system for serial control
9. AUDIO OUT - Audio de-embedded outputs for 1-8; phoenix for analog 2 channel audio
and RCA for digital S/PDIF mulchannel

DL-HDM88A-H2 Installaon Guide
7
Installaon Instrucons
Mount the Matrix
Rack Mounng Instrucons
At least 2 inches of free air space is required on both sides of the DL-HDM88A-H2 for proper side venlaon.
Avoid mounng the DL-HDM88A-H2 near a power amplier or any other source of signicant heat.
Remove the rubber feet from the boom of the matrix. Remove the larger two screws on both sides of the DL-
HDM88A-H2.
Aach the supplied rack ears to the sides of the DL-HDM88A-H2 matrix. The matrix requires one rack unit (1
RU) of space. It is recommended that you leave an empty rack space above and below the DL-HDM88A-H2 for
addional cooling.
Connect Sources
Connect Displays
Connect the source devices to HDMI inputs using HDMI cables that are less than or equal to 1.5 meters in length
for 4k60 signals. For source devices that are further away, it is highly recommended to install a Digitalinx DL-
HD70, DL-HDE100, DL-HDE100-H2 or the DL-HD2100.
Connect the display devices to HDMI outputs using HDMI cables that are less than or equal to 1.5 meters in
length for 4k60 signals.. For display devices that are further away, it is highly recommended to install a Digitalinx
DL-HD70, DL-HDE100, DL-HDE100-H2 or the DL-HD2100.

DL-HDM88A-H2 Installaon Guide
8
Connect External IR Control
If IR extension is required, connect the TRS 3.5 mm plug IR RX to the matrix IR EXT port, ensuring the IR receiver
eye is placed in clear view of the handset used to control.
Insert the matrix power supply included and switch on power located on the front panel. Check that the front
panel LED screen is on to indicate the matrix is ready for use.
Applying Power
Switching Capabilies
Switch between sources and displays using the matrix front panel buons, IR remote control, serial RS232, or
LAN. To set a route using the front panel of the DL-HDM88A-H2, press the desired Input buon (Source) and
desired Output buon (Display), then press Take.

DL-HDM88A-H2 Installaon Guide
9
Connect RS232 Control
The RS232 connecon on the matrix is female DB9. User can use a USB to UART cable or a direct serial cable for
matrix control. See below for control system conguraon.
• 9600 baud
• 8 Data Bits
• 1 Stop Bit
• Parity = none
Connect Ethernet (Web Browser) Control
The DL-HDM88A-H2 may be controlled via Ethernet through a web browser interface.
The TCP/IP port requires a standard straight-through Category 5
or greater cable with the TIA/EIA-568B crimp paern for opmal
operaon.
The default sengs for the TCP/IP port are:
IP address: 192.168.0.178
TIA/EIA-568B
Orange/White
Orange
Green/White
Blue
Blue/White
Green
Brown/White
Brown
Pin 1
Pin 2
Pin 3
Pin 4
Pin 5
Pin 6
Pin 7
Pin 8
1 8
Connect the Ethernet cable between to the matrix and a router
with a straight-through cable or between the matrix and a
computer with a crossover cable.

DL-HDM88A-H2 Installaon Guide
10
Router Connecon
1. Congure the router to use the same IP range as the matrix, such as 192.168.0.1.
2. Connect the computer to the router.
3. Connect the DL-HDM88A-H2 to the router
Crossover Cable Connecon
1. Congure the computer to use the same network prex as the IP address assigned to the matrix. For
example, the IP address of the matrix is 192.168.0.178. Set the computer to use a stac IP address within
the same network range, such as 192.168.0.42.
2. Connect the network crossover cable to the computer and to the TCP/IP port on the DL-HDM88A-H2
Web Browser Control
The DL-HDM88A-H2 includes a web portal to allow control of the matrix via a standard web browser. The IP
address is the same address that is used for TCP/IP control.
TIA/EIA-568A
Green/White
Green
Orange/White
Blue
Blue/White
Orange
Brown/White
Brown
Pin 1
Pin 2
Pin 3
Pin 4
Pin 5
Pin 6
Pin 7
Pin 8
1 8 TIA/EIA-568B
Orange/White
Orange
Green/White
Blue
Blue/White
Green
Brown/White
Brown
Pin 1
Pin 2
Pin 3
Pin 4
Pin 5
Pin 6
Pin 7
Pin 8
1 8
Crossover Cable Pinout
Altri manuali per DL-HDM88A-H2
2
Indice
Altri manuali DigitaLinx Commutatore a matrice

DigitaLinx
DigitaLinx DL-S42-H2 Manuale utente

DigitaLinx
DigitaLinx DL-HDM44-FS Istruzioni operative

DigitaLinx
DigitaLinx DL-HDM44 Manuale utente

DigitaLinx
DigitaLinx DL-HDM88-SS Istruzioni operative

DigitaLinx
DigitaLinx DL-HDM88-FS Istruzioni operative

DigitaLinx
DigitaLinx DL-HDM88A-H2 Manuale utente

DigitaLinx
DigitaLinx DL-A51 Manuale utente

DigitaLinx
DigitaLinx DL-A31 Manuale utente

DigitaLinx
DigitaLinx DL-44E-KIT Istruzioni operative

















