Digitus DS-51200 Manuale utente
USB KVM Extender
Quick Installation Guide
DS-51200
1
System Requirements
Console
1 A VGA, SVGA, Multisync monitor capable of the highest resolution
2 USB keyboard/mouse
Computer
1 A VGA, SVGA or multisync card
2 Type A USB port or PS/2 6-pin mini-DIN for keyboard and mouse
3 Operating systems: Windows 98/98SE/2000/ME/XP/Vista/7/2003 server,
Mac OS9/OSX, Linux Kernel 2.3 or later, Solaris 8 or later, Sun Micro OS
Cables
1 CAT5/CAT5E/CAT6 cable to connect the remote and local unit; the
supported maximum length of this cable is 200 meters; the resolution is
1280x1024@60Hz
2 Custom Combo 4-in-1 cable (accessories)
Hardware Installation
1 Switch off all devices
2 Connect your monitor and USB keyboard/mouse to the local unit (tranmitter), if
you want to control your system at the local console
3 Connect your monitor and USB keyboard/mouse to the remote unit (receiver), if
you want to control your system at the remote console
4 Connect the remote and local unit by using a CAT5/CAT5E/CAT6 cable; the
supported maximum cable length is 200 meters; the resolution is
1280x1024@60Hz
5 Connect one DC 5V power supply to the local unit (transmitter)
6 Connect the other DC 5V power supply to the remote unit (receiver)
7 Connect Video and the USB keyboard/mouse of the local unit (transmitter) to
the PC/KVM by using the Combo 4-in-1 cable
8 Turn on your computer, if it was turned off
9 Adjust the video quality by using the color skew or brightness switch
2
Operations
Active console selection by Push Button
You can press the push button on the local unit (transmitter) to change the active
console operation. There are three different types of active console configurations:
1. Local Console Only
You can operate the system only from the local unit (transmitter)
2. Remote Console Only
You can operate the system only from the remote unit (receiver)
3. Both Consoles (Local + Remote)
You can operate the system through local unit (transmitter) and
remote unit (receiver) synchronization
The default configuration is “Both Consoles” mode. Once you change the active
console configuration, it will be saved and not be affected by a unit reset.
The selected active console can be shown via “Selected Indicators”
by the LED indicators. In this context, please refer to the description of the next
sections.
3
LED Indicators
The LED indicators of the remote console are the same as of the local, if both units
are connected successfully; or all LED indicators at remote console will turn OFF.
Selected Indicators (RED)
Both Selected:
Indicates that you can control your system from both the local and remote
console
Local Selected:
Indicates that you can control your system by the local console only
Remote Selected:
Indicates that you can control your system by the remote console only
Active Indicators (GREEN)
Indicates the connection status:
Local Indicator:
Indicates whether the connection between the local unit and the PC or KVM
is ready or not
Remote Indicator:
Indicates whether the connection between the local and remote unit is
ready or not
4
Examples of LED Indicators:
Both consoles are selected; local active is ON, remote active is OFF:
It means that the connection between the local unit and the computer is
ready, but that the CATx cable connection between the local and remote
unit is not ready.
In this case, you can only control your system at the local console, because
the remote console is not connected successfully. The following indicators
are shown at the local console, all LED indicators will be OFF at the remote
console because of disconnection.
Both consoles are selected; local active is OFF, remote active is ON:
It means that the CATx cable connection between the local and remote unit
is ready, but that the local unit is not connected to the PC/KVM correctly or
that the PC/KVM is not turned on. In this case, you can not control your
system by any console, because the PC/KVM is not available to control.
Both consoles are selected; local active is ON, remote active is ON:
All connections of the local and remote units are successful - You can
control your system at both the local and remote console.
The active console is inconsistent with the selected console:
You cannot control your system if the active console is inconsistent
with selected one.
Indice
Altri manuali Digitus Estensione
Digitus
Digitus DS-55400 Manuale utente
Digitus
Digitus DN-70185 Manuale utente
Digitus
Digitus DN-651143 Manuale utente
Digitus
Digitus DA-70139-2 Manuale utente
Digitus
Digitus DS-55517 Manuale utente
Digitus
Digitus DS-53200 Manuale utente
Digitus
Digitus DS-55129 Manuale utente
Digitus
Digitus DS-55122 Manuale utente
Digitus
Digitus DS-55101 Manuale utente
Digitus
Digitus DS-55508 Manuale utente
Digitus
Digitus DS-55204 Manuale utente
Digitus
Digitus DS-55529 Manuale utente
Digitus
Digitus DS-55202 Manuale utente
Digitus
Digitus DS-55100 Manuale utente
Digitus
Digitus DC-51101-LOCAL Manuale utente
Digitus
Digitus DS-51201 Manuale utente
Digitus
Digitus DS-55126 Manuale utente
Digitus
Digitus DS-55520 Manuale utente
Digitus
Digitus DS-55502 Manuale utente
Digitus
Digitus DS-55522 Manuale utente
