Digitus DN-13003-2 Manuale utente
USB 2.0
ETHERNET PRINT SERVER
Quick Installation Guide
DN-13003-2
2
Before you start, you should prepare the following items:
Windows 2000/XP/2003/Vista/7/8/10 computer with print server setup CD
One Printer(non-GDI/CAPT)
One Printer cable
One 802.11b/g/n Access Point (optional)
Wired Network with Print Server:
Printer Print Server
Computer Computer Computer
HUB
Factory Default Settings:
Password:
IP Address: 192.168.0.10
Subnet Mask: 255.255.255.0
Hardware Installation:
1. Turn off the printer’s power.
2. Connect the print server to your printer with the supplied printer cable.
3. Turn the printer’s power on.
4. Plug the AC power adapter into the power connector on the print server.
5. Wait 40 seconds as part of the print server’s Power On Self Test (POST).
3
Prepare Your Computer to Connect Print Server first:
1. Please specify a proper IP address for your wireless adapter, e.g.192.168.0.101.
Software Installation:
1. To enable network communication with print server, your computer must have a proper
IP address, e.g. 192.168.0.101 (the print server’s default IP is 192.168.0.10)
2. Insert the setup CD into your CD-drive. The autorun program will be started.
4
2. Choose Setup Wizard to install the print server and configure the connected printer.
3. Click Next, the wizard will automatically discover the print server.
5
4. From the Select A Print Server screen, select the print server port that you want to
configure and click Next.
6
5. On the Change Settings screen, select No or Yes:
Click No if you want the print server to keep using the default IP address and the default
settings:
Password:
IP address: 192.168.0.10
Subnet Mask: 255.255.255.0
Or
Click Yes if you want change settings or assign a static IP address to the print server:
Note:
The IP address of print server must be within the same subnet as your network adapter.
7
6. In the setup wizard, select an already configured printer from the list, click Next, Next
and then Finish to complete the installation.
or
Select Add New Printer if the print server is connected to a printer that hasn’t been
installed before and does not appear in the list.
8
7. Click Add New Printer to launch Windows Add Printer Wizard.
8. Click Next and select Local Printer, make sure the Automatically detect and install
my Plug and Play printer check box is NOT checked. Then click Next.
9
9. Make sure the Use the following port radio-button is clicked and select LPT1:
(Recommended Printer Port) from the pull-down list. Then click Next.
10. Select Manufacturer and Printer from the lists of printer’s driver. Then click Next.
10
11. If you already have the printer’s driver installed, you will be asked whether to keep it or
to replace it. Click Next. Supply a name for the printer and choose whether you want to
make it your default printer. Then click Next.
12. Then, choose whether you want to share the printer with other network users, print a
test page (please select No.), etc. Select the appropriate radio-button and click Next
and Finish.
13. In the setup wizard, finish the installation by highlighting the installed printer in the
Select a Printer list and click Next,Next -> Finish.
Indice
Altri manuali Digitus Server di stampa
Digitus
Digitus DN-13001-1 Manuale utente
Digitus
Digitus DN-13007 Manuale utente
Digitus
Digitus DN-13005 Manuale utente
Digitus
Digitus DN-13006-1 Manuale utente
Digitus
Digitus DN-13007 Manuale utente
Digitus
Digitus DN-13006-1 Manuale utente
Digitus
Digitus dn13006w Manuale utente
Digitus
Digitus DN-13014 Manuale utente
Digitus
Digitus DN-13014-3 Manuale utente
Digitus
Digitus DN-13014-2 Manuale utente
