Digitus Plug&View DN-16038 Manuale utente
1
DIGITUS®Plug&View
IP Cameras
Quick Installation Guide.
(QIG)
2
Safety Precautions
Only use the Plug&View IP camera within the specified
temperature range for this camera
When not in use, store the product in a clean and dry place in
temperatures between 0°C and 40°C
Do not cover the camera
Do not let the camera come into contact with liquids (except
outdoor cameras with IP66 protective cover)
Plug&View IP cameras do not replace adult supervision.
Safeguard the health of your children, family members or pets by
regularly looking after them
Ensure that the indoor IP cameras are only used inside. These
cameras are not intended for outdoor use and can be damaged.
In this case use the specified outdoor models
Install the Plug&View IP cameras in close proximity to an easily
accessible wall outlet. Ensure that the power cord is not under
tension or stretched
Position the Plug&View IP cameras within the range of your Wi-Fi
router and ensure that there are no obstacles between camera
and router, which could interfere with the Wi-Fi signal
3
Protect the Plug&View IP cameras from electrical and other HF
devices generating interferences (microwaves, mobile phones,
etc.)
Keep camera, network cable and power cord outside the reach of
children, since these components can be dangerous
Only use the supplied power adapter.
Never try to repair Plug&View IP cameras yourself. Repair and
maintenance work must be carried out by specialists.
In case of problems contact our customer service.
Observe all applicable laws regarding camera monitoring. The
Plug&View IP cameras are intended for private use at home.
Inform your family members, relatives and domestic helpers in
your household with regard to video monitoring. Ensure that
public areas and your neighbors’ properties cannot be seen.
4
Personal Information
Read and accept the privacy policy for using the DIGITUS®
Plug&View systems under http://plug-view.com/privacy-policy-
for-platform-apps/.
Select a password with a high degree of safety for your
Plug&View account to protect it from unauthorized access.
The password should contain at least 8 characters; we
recommend case-sensitive letters and alphanumeric characters.
Furthermore, the standard password of the camera should be
changed to avoid unauthorized access here as well.
Live stream, push notification and further services are
available via a cloud server. Despite backup solutions, system
stability and bandwidth management the uninterrupted
availability of the system cannot be guaranteed.
What's in the box
1 x Plug&View IP camera
1 x Power supply with cable
1 x Quick Installation Guide
1 x CD with utilities
Optional:
1 x Ethernet cable
1 x Ceiling/Wall mount
1 x Removable antenna*
*The following cameras are equipped with a removable antenna:
DN-16029, DN-16039, DN-16043, DN-16048, DN-16049
Thank you for choosing a Plug&view IP-camera, which can be up-
and-running quick and easy without complicated network settings.
EN
5
Install MicroSD Card
DIGITUS®indoor Plug&View cameras can be equipped with a
microSD card for recording.
Check installation option by means of the installation illustration.
DN-16047
Install the SD card as
illustrated, with the
golden contacts
towards the camera
lens.
DN-16046
Install the SD card as
illustrated, with the
golden contacts
towards the camera
lens.
DN-16029
Install the SD card as
illustrated, with the
golden contacts up.
6
Camera Connections
LAN:
Connect the camera to the
LAN port of your router.
Reset:
Press and hold the Reset
button for 10 seconds after
starting the camera to reset the
camera to default settings.
Power:
Connect the supplied power
cord to supply the camera with
power.
MicroSD:
Insert a microSD card for local
storage.
Mic:
Microphone (Audio In).
Audio output:
Connect an external speaker
via the 3.5mm audio cable.
WPS:
Press and hold the WPS button
for 3 seconds after starting the
camera to activate WPS mode.
Alarm:
Pin1: Alarm input
Pin2: Ground
Pin3: Not in use
Pin4: NO
Antenna port
WPS button
Network port
DC SV power supply
Reset
Alarm input/output
MicroSD card slot
A
udio outpu
t
Network port
Audio output
WPS DC 5V power supply
MicroSD card
slot
MicroSD card slot
Reset
Reset
DC 5V power suppl
y
7
Camera Connections
DIGITUS®outdoor Plug&View cameras are equipped with a special
cable.
Check installation option by means of the installation illustration.
Reset button:
Press and hold this
button for 10 seconds
after the camera is
connected and ready-
to-use. This resets the
camera to default
settings.
Network cable:
Connect the network
cable to you router on
the network to establish
Internet connection.
DC 12V power
connection:
Connect the external
power adapter to
supply the camera with
power.
LED status indicator:
The blue LED status
indicator shows if the
camera is supplied with
power.
For models DN-16039, DN-16043 and DN-16048 power can be
supplied directly to the camera via the network cable in connection
with a PoE injector or PoE switch.
8
Lens Settings
DN-16039
DN-16043
You can adjust focus
and sharpness via
manual controls.
Use the camera live
image to adjust
focus and
sharpness as
required.
Set focus (angle)
Set sharpness
Set focus (angle)
Set sharpness
9
1. Preparation
Before you can use your IP camera, some preparations must be
taken care of.
Connect antenna
Plug the wireless antenna into the connector and tighten the
mounting bolts.
Insert SD-card
The Plug&View IP cameras support MicroSD cards with up to 32
GB storage capacity, which you can buy at your resellers. Pictures
or videos taken with your IP camera are then stored on this card.
If your camera has an external port and does not have existing
internal memory, insert your MicroSD card into the corresponding
slot until it firmly snaps into place.
Connect power supply
Plug the cable of the enclosed power supply into the "Power"
connection of the camera.
Connect camera to router (e.g. AVM Fritz!Box,
Telekom Speedport etc.)*
Connect one end of the supplied network cable to the LAN port of
the camera. Connect the other end of the network cable to one of
the connectors marked as 'LAN' on the back of your router. Some
routers have only one LAN connection, others have multiple
connections. Your router must have a working Internet connection.
*You can skip this point with the access point mode of the cameras.
For DN-16047 this point must be skipped.
10
2. Setting up the Plug&View User Account
In order to use your Plug&View camera and to have a video image
at any time and anywhere, you need to register your camera in a
Plug&View user account. The setup and control can both be done
from your Smartphone/tablet as well as from a PC.
2.1 Create a user account with your
Smarthpone/tablet
If you have an Apple
®
iOS device, then you will find our "DIGITUS
®
Plug&View" App in the Apple App Store
®
. For Smartphones and
tablets running on Google Android OS you can find our "DIGITUS
®
Plug&View"-App in the Google™ Play Store.
In the search field of the respective App Stores
®
enter "Digitus" or
"DIGITUS Plug&View".
Apple App Store
®
Google™ Play
Indice
Lingue:
Altri manuali Digitus Telecamera di sicurezza
Digitus
Digitus DN-16082-1 Manuale utente
Digitus
Digitus network bullet camera Manuale utente
Digitus
Digitus DN-16050 Manuale utente
Digitus
Digitus DN-16054 Manuale utente
Digitus
Digitus Plug&View OptiView DN-16028 Manuale utente
Digitus
Digitus DN-16062 Manuale utente
Digitus
Digitus DN-6032 Manuale utente
Digitus
Digitus DN-18604 Manuale utente
Digitus
Digitus ADVANCED NETWORK SURVEILLANCE CAMERA Manuale utente
Digitus
Digitus DN-16065-1 Manuale utente
Digitus
Digitus DN-16027 Manuale utente
Digitus
Digitus DN-16055 Manuale utente
Digitus
Digitus DN-16026 Manuale utente
Digitus
Digitus DN-16027 Manuale utente
Digitus
Digitus DN-16069 Manuale utente
Digitus
Digitus DN-16085 Manuale utente
Digitus
Digitus DN-16050 Manuale utente
Digitus
Digitus DN-16026 Manuale utente
Digitus
Digitus IP Network Camera None Manuale utente
Digitus
Digitus DN-16027 Manuale utente
