DIHS Optima W R2 Plus Manuale utente

OPTIMA W R2 PLUS THERMOSTAT

Optima W PLUS is a development of DIHS BV, NETHERLANDS. www.dihsbv.nl

This surface-mounted radio thermostat has been developed to be able to switch electric and

conventional heating systems on and off using a set temperature and time. It can pair with TC-25, TC30,

TC35, TC40 or TC-60 for remote control anytime anywhere.

Functions

Large display can be clearly read with the background lighting.

Easy to fit thermostat and receiver.

Five buttons make it easy to use.

4 periods of each day programmable

The display shows the set temperature as well as the measured temperature, time.

Temperature display in degrees Celsius.

The thermostat is supplied with a wall-fixing frame, base and a very compact receiver

(surface-mounted).

Technical Data

Thermostat operating voltage: 2 x AA1.5 V, alkaline batteries.

Backup storage: EEPROM

Receiver operating voltage: 230 VAC, 50/60 Hz

TC-05 Max. load: 10 A.

TC-06 Max.load: 16A

Frequency: 868 MHz bi-directional

Channel selection: By programming the thermostat and the receiver.

Switching options: 7day, 4 periods each day.

Receiver switch contacts: Voltfree of powered NO/NC (depends on the type of

reciever).

Temperature settings: 5°C ~ 35°C, 0.5°C increments.

Accuracy: +/- 0.5°C

Thermostat dimensions: Surface mounted, 135mm x 87.5 mm x 23.2mm.

Receiver dimensions: Surface mounted, 86mm x 86 mmx26mm

Color: White

IP protection rating: 20.

Certification: CE, Rohs, RED

OPTIMA W R2 PLUS THERMOSTAT

Optima W PLUS is a development of DIHS BV, NETHERLANDS. www.dihsbv.nl

Display & Buttons

Mode Select

Short press SET button to select MAN Mode/Away Mode(no icon indicators).

Press PRG button to switch on/off PRG mode

PRG. Schedule Setting

Long press PRG button to enter PRG setting. The weekday is fixed from Monday to Sunday(1~7), each

day have 4 periods(1~4). Each press of PRG button can into next item setting.

The time and temperature of each period i can be set in following steps.

1). Press PRG and hold for 3 seconds, the time display flash, change the value by + and - button.

（each press is 15mins）

2) Press PRG button , the temperature display flash, change the temperature by + and - button.

3). Press PRG button to next period.

4). The other period settings follow the same way.

Default Setting:

Period 1 2 3 4

Time Temp Time Temp Time Temp Time Temp

12345(Mon.~Fri.) 7:00 22℃8:30 19℃17:00 22℃22:00 19℃

6(Sat.) 8:00 22℃8:30 22℃17:00 22℃22:00 19℃

7(Sun.) 8:00 22℃8:30 22℃17:00 22℃22:00 19℃

On/off Button

Mode Select & Time

Adjust & Sensor

Calibration Button

Room Temp.

Set Temp.

Heat Icon

Programming Button &

MAN/PRG. Mode Select

Week/Day

Time

PRG Period

PRG. Mode

MAN Mode

OPTIMA W R2 PLUS THERMOSTAT

Optima W PLUS is a development of DIHS BV, NETHERLANDS. www.dihsbv.nl

Clock Adjustment

-Press and hold the SET button for around 3 seconds. The minutes display (top left in the display)

flashes.

-Change this value using the +and –buttons.

-Press the SET button . The hour display (top left in the display) flashes.

-Change this value using the +and –buttons.

-Press the SET button. The day display (top left in the display) will flash as a number.

-Change this value using the +and –buttons. Use 1 for Monday, 2 for Tuesday, 3 for

Wednesday, 4 for Thursday, 5 for Friday, 6 for Saturday and 7 for Sunday.

Code Pairing

TC-25/30 (wall mounted type):

TC-35/40 (flush type):

Notes:

If thermostat will connect to TC-25 or TC-35, please adjust parameter setting item 04 to 0 (Internal

sensor only). (Factory default mode)

If thermostat will connect to TC-30 or TC-40, please adjust parameter setting item 04 to 1 or 2, depends

on actual usage.

Code pairing button

Heating on indicator (LED

Power indicator (LED 2)

On/off button

Pairing indicator (LED1)

Code pairing button

& on/off button

Power indicator (LED2)

OPTIMA W R2 PLUS THERMOSTAT

Optima W PLUS is a development of DIHS BV, NETHERLANDS. www.dihsbv.nl

I. Code Pairing with TC-25, TC-30, TC-35 or TC-40.

1) Long press the code pairing button on the receiver until LED 1 is flickering quickly.

2) Turn off thermostat, and long press SET button until the code shows on the top left corner of screen,

then press +button, the left corner battery icon start flashing.

3) Wait for a while, when LED 1 on TC05/TC06 stop flickering, indicating successful code pairing.

II. Code Pairing with App

1) Scan the QR code, and download “Smart Life” APP from google play or app store

2) Install app and register account

3) Add device by press + button at top right corner

4) Press “ Home Appliances II”

5) Find “ Thermostat or Heater” on the list and press

6) Long press Pairing button on receiver till the LED 1 will flash quickly.

7) Press “Confirm indicator rapidly blink” on phone.

8) After a while, when the LED 1 on receiver stop flashing, indicating successful Wifi connection.

If the LED still flash slowly, the connection fail, please try again from step. 5.

III. Signal Lost

In case the RF and WIFI signal lost/disconnected, LED 1 will flash slowly.

Parameter Setting

Turn thermostat off, press and hold SET button and +button for 6s to enter parameter setting. Each

press of SET button will go to next item setting. Adjust the value by pressing +or –button.

Description Range Default Value

01 Temp. calibration for internal sensor -8 ℃~8 ℃0℃

02 Set Point Max. 5 ℃~35℃35 ℃

03 Set Point Min. 5 ℃~35℃5 ℃

04 Sensor Select 0: Internal sensor

1: External sensor

2:Internal & External

sensor

05 Frost Protection Temp. 5 ℃~15℃5 ℃

06 Floor Temp. Display Read Only

08 High temp protection 30°C ~ 80°C 32 ℃

09 Dead zone 0~3℃0℃

10 Display 0: Room temp.

1: SET temp.

11 Child Lock 0: Disable

1: Enable

OPTIMA W R2 PLUS THERMOSTAT

Optima W PLUS is a development of DIHS BV, NETHERLANDS. www.dihsbv.nl

Parameter Settings Explained

Feature 01– This feature used to calibrate the room temperature when need. For example, if actual

room temperature 21.5°C, but thermostat shows 23°C, then you can set this value to -1.5 to calibrate.

Feature 02/03– Temperature Max.& Min. Limit: This function allows you to limit the use of the up and

down temperature by pressing +/- buttons.

Menu 05 - Low Temperature Protection: This is the temperature maintained when the thermostat is in

Frost Mode. If room temperature below 5°C(Settable), thermostat will turn on heating device till room

temperature arrive 5°C(Settable).

Menu 09 - Switching Differential: This function allows you to increase the switching differential of the

thermostat. The default is 0°C which means that with a set temperature of 20°C, the thermostat will

switch the heating on at 19.5°C and off at 20.5°C. With a 0.5°C differential, the heating will switch on at

19°C and off at 21°C.

Menu 11– This feature used to lock the keys. When lock, you can long press SET button to unlock.

Menu 12-This function allows you to save energy. When enable Open Window Detection function, the

system will automatically stop heating when it detects a sudden drop of room temperature (2°C in 15

minutes as default). This is normally caused when a window or door is opened without turning off the

heating device.

The device will return to the previous mode of operation after 30mins, then letter OP disappear. Press

any button will exit OWD function during the heating off period.

Menu 13-The setting time to detect the drop of room temperature between 2-15mins (15 mins is the

default setting).

Menu 14-The drop temperature to during detect period. Setting between 2-4°C (2°C is the default

setting).

Menu 15-The time to exit OWD mode select. Setting between 10~60min(30min is the default setting).

12 Open window detect function 1: Enable 0: Disable

13 OWD Detect Time 2~30mins 15mins

14 OWD Drop temp. select

（within detect time）

2.3.4’C 2 ‘C

15 OWD Delay time select

(Return to previous working status)

10~60min 30mins

17 Factory reset 0: No 0

1: Yes, and then press

On/off button for 5s,wait

until thermostat restart

18 Software version

OPTIMA W R2 PLUS THERMOSTAT

Optima W PLUS is a development of DIHS BV, NETHERLANDS. www.dihsbv.nl

Wiring Diagram

TC-25 TC-35 wiring:

TC-30 TC-40 wiring:

Installation

Mount the thermostat at eye level. Read the instructions fully so you get the best from our product. Do

not install near to a direct heat source as this will affect functionality. Do not push hard on the LCD

screen as this may cause irreparable damage.

Step 1: Carefully separate the front half from the back plate.

Step 2: Screw the thermostat back plate securely on wall with provided screws

OPTIMA W R2 PLUS THERMOSTAT

Optima W PLUS is a development of DIHS BV, NETHERLANDS. www.dihsbv.nl

Step 3: Clip the front of the thermostat onto the back plate.

TC-25 TC-30:

Step 1: Using a small screwdriver, slightly loosen receiver cover plate.

Step 2: Terminate the thermostat as shown in the diagram

Step 3: Clip the front of the thermostat onto the back plate.

Types of receivers (with RF and WiFi);

TC-25: Wall mounted receiver, 230Vac, voltfree output, 10 A Ohmic load / 4A Cap/ind load.

TC-30: Wall mounted receiver with floorsensor, 230Vac, voltfree output, 10 A Ohmic load / 4A Cap/ind

Load.

TC-35: Flush mounted receiver, 230Vac, voltfree output, 16 A Ohmic load / 10A Cap/ind load.

TC-40: Flush mounted receiver with floorsensor, 230Vac, voltfree output, 16 A Ohmic load / 10A

Cap/ind Load.

TC-60: Plugin mounted receiver, 230Vac, powered output, 16 A Ohmic load / 10A Cap/ind load.

NOTE;

When the voltage output is above 230Vac, eg 240-250Vac, then the capacity of the receiver should be

lower. For the TC-25 and TC-30 the maximum ohmic load is then 6A. For the TC-35, TC-40 and TC-60

its 12A ohmic load.

Indice

Altri manuali DIHS Termostato

DIHS

DIHS Optima W R2+ Manuale utente

Manuali Termostato popolari di altre marche

EWELLY

EWELLY EW-181 Manuale utente

Prolon

Prolon T1100 Istruzioni per l'installazione

Computherm

Computherm Q20 Manuale utente

Heatmiser

Heatmiser neoStat Manuale utente

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Manuale utente

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Manuale utente

Saswell

Saswell SAS920XWHB-7-S-RF Guida

Aircalo

Aircalo TFP1-ET85P2 Manuale utente

Honeywell

Honeywell CM721 Manuale utente

Carrier

Carrier DEBONAIR 33CS Manuale utente

Lennox

Lennox iHarmony Zone Thermostat Istruzioni per il montaggio

Gemtech

Gemtech GT7000 Manuale di istruzioni

Rollei

Rollei Smartes 45000 Manuale utente

Sinope

Sinope TH1300RF Manuale utente

Honeywell

Honeywell RLV4305 Manuale utente

Honeywell

Honeywell Prestige 2.0 THX9421 Manuale utente

NuTone

NuTone NTBZ48 Istruzioni operative originali

Stelpro

Stelpro MAESTRO ASMT402AD Manuale utente