Dimplex DHCER24E Manuale utente

2.4KW CERAMIC HEATER

WITH ELECTRONIC CONTROLS

DHCER24E

User Manual

Please read the instructions carefully before using the product and

keep this user manual for future reference.

1. PRODUCT FEATURES

•2.4kW heat output

•Choice of heat settings

•Double overheat protection

•Tip over safety protection

•Oscillating function

•Electronic climate control

•LED temperature display

•Remote control

•12 month warranty

2. SAFETY WARNINGS

•Please operate the heater on a dry even surface.

•This appliance is not intended for use by persons (including children) with

reduced physical, sensory or mental capabilities, or lack of experience and

knowledge, unless they have been given supervision or instructions

concerning the use of the appliance by a person responsible for their safety.

•Disconnect the heater from mains when not in use or cleaning.

•Do not operate the appliance with a damaged cord or plug. If the power

supply cord is damaged, it must be replaced by the manufacturer or its

service agent or a similarly qualified person in order to avoid a hazard.

•It is not recommended to use an extension cord or power board on this

appliance.

•Do not immerse cord, plug or any part of the appliance in water or any other

liquid.

•Do not place the heater on or near any other source of heat.

•WARNING: do not cover the heater. This may cause the unit to overheat.

•A fire may occur if the heater is covered with or touches flammable material,

including curtains, drapes, bedding etc. When in operation KEEP THE HEATER

AWAY FROM SUCH MATERIALS.

•Do not use the heater in the immediate surroundings of bathtubs, showers,

washing stands or swimming pools.

•Do not use the heater outdoors.

•When the heater is turned on for the first time, it may release a slight,

harmless odor. This odor is a normal occurrence caused by the initial heating

of the internal heating elements and should not occur again.

•Do not operate the heater in areas where flammable liquids are stored.

•Do not operate the heater in close proximity to curtains or other combustible

materials. Keep any combustible materials at least 1.0m away from the

heater.

3. ASSEMBLY INSTRUCTION

Open the packaging, take the unit out and unscrew the base fixing nut.

Insert the base into the bottom of the unit and screw on the base fixing nut.

Turn the unit upright and place it on a flat or even surface before use.

4. PARTS DESCRIPTION

1. Touch Sensor Panel 2. Display Window

3. Front Cover 4. Base

5. Inlet 6. Power Switch

5. OPERATING INSTRUCTIONS

First, connect the power cord to the correct power supply (220-240V~/5 0 H z / 10

amps).

1. Press the power button at the back of the unit to turn it on. You will hear

2 beeps, which indicates the unit is in standby mode.

2. Once in standby mode, the power button needs to be pressed to start the

heater. This is the only button that works under standby mode. Press it a

second time to switch it off.

Touch Sensor Panel

•Press the “On/Off” button to turn the unit On/Off.

•Press the “Swing” button to start or stop oscillation.

-The oscillation indicator light will illuminate when the swing

function is activated.

-The oscillation indicator light will be turned off when in fixed

operation.

•Press the “Temp/Timer” button to set your desired temperature. You can

increase or decrease temperature by pressing the + or – button. The

temperature range is from 15°C to 35°C and in increments of 1°C.

•Press the “Temp/Timer” button a second time to set the timer. This will

tell the heater how long you want the unit to operate before shutting off

automatically. The timer range is from 1-12 hours and in increments of 1

hour.

•Press the “Heater” button to set the unit on low or high heat.

-The low heat indicator light will illuminate when the “Heater”

button is pressed once.

-The high heat indicator light will illuminate when the “Heater”

button is pressed twice.

Remote Control

•Press the button to turn the unit On/Off.

•Press the button to start or stop oscillation.

-The oscillation indicator light will illuminate when the swing

function is activated.

-The oscillation indicator light will be turned off when in fixed

operation.

•Press the “Set” button to set your desired temperature. You can increase

or decrease temperature by pressing the + or – button. The temperature

range is from 15°C to 35°C and in increments of 1°C.

•Press the “Set” button a second time to set the timer. This will tell the

heater how long you want the unit to operate before shutting off

automatically. The timer range is from 1-12 hours and in increments of 1

hour.

•Press the button to set the unit on low or high heat.

-The low heat indicator light will illuminate when the “Heater”

button is pressed once.

-The high heat indicator light will illuminate when the “Heater”

button is pressed twice.

Remote Control – Battery

1. To remove the battery, open the groove at the bottom of the remote

(press buckle inwards to pull out the groove)

2. Put battery CR2032 into the groove with flat side to the back of the

remote.

3. Push groove back into the remote.

6. CLEANING AND MAINTENANCE

Make sure the power switch is turned off and the plug is disconnected from the

socket before cleaning or maintenance. Otherwise, it may cause an electric shock.

1. Cleaning the unit’s surface:

Clean the surface with a damp cloth (or add some detergent). Do not use

corrosive detergent or solvent to clean, such as Petrol/ Turpentine etc. Do not

wash the unit directly with water.

7. SPECIFICATION

Model No. DHCER24E

Product name 2.4kW Ceramic Heater w/Electronic

Controls

Voltage/Frequency 220-240V~/50Hz

Power 2400W

Speed ≥1.5 m/s

Noise ≤50dB（1m）

Tip over protection angle 45±5°

Product size 608h x 222w x 210d (mm)

N.W. 3.5kg

G.W. 4.25kg

DISPOSAL: Do not dispose this product as unsorted municipal waste.

Collection of such waste is required to be disposed of separately.

Glen Dimplex Australia Pty Ltd Glen Dimplex Australasia Ltd

Unit 1, 21 Lionel Road 38 Harris Road

Mount Waverley VIC 3149 East Tamaki, Auckland

Phone: 1300 556 816 Phone: 09 274 8265

Fax: 1800 058 900 Fax: 09 274 8472

Email: sales@glendimplex.com.au Email: sales@glendimplex.co.nz

Indice

Altri manuali Dimplex Stufa

Dimplex

Dimplex CFP30 Manuale utente

Dimplex

Dimplex PLX050E Manuale utente

Dimplex

Dimplex XMC712N Manuale utente

Dimplex

Dimplex DGP1000-B Manuale utente

Dimplex

Dimplex HAW1000N Manuale utente

Dimplex

Dimplex H 260E Manuale utente

Dimplex

Dimplex EMC4240 Manuale utente

Dimplex

Dimplex DTD Manuale utente

Dimplex

Dimplex EvoRad Series Manuale utente

Dimplex

Dimplex DXC20 Manuale utente

Dimplex

Dimplex CXLS24 Manuale utente

Dimplex

Dimplex EvoRad2BTA Manuale utente

Dimplex

Dimplex RFI Series Manuale utente

Dimplex

Dimplex CXLSN Manuale utente

Dimplex

Dimplex RCH5031CXW Manuale utente

Dimplex

Dimplex WH 6100770000 Manuale utente

Dimplex

Dimplex DF-X Manuale utente

Dimplex

Dimplex OCR15 Manuale utente

Dimplex

Dimplex 402E Manuale utente

Dimplex

Dimplex XL12N Manuale utente

Dimplex

Dimplex LCM Series Manuale utente

Dimplex

Dimplex Duo300i Manuale utente

Dimplex

Dimplex Quantum series Manuale utente

Dimplex

Dimplex LPC Series Manuale utente

Manuali Stufa popolari di altre marche

oventrop

oventrop Regucor Series Manuale utente

Blaze King

Blaze King CLARITY CL2118.IPI.1 Manuale utente

ELMEKO

ELMEKO ML 150 Manuale utente

BN Thermic

BN Thermic 830T Manuale utente

KING

KING K Series Guida

Empire Comfort Systems

Empire Comfort Systems RH-50-5 Guida rapida

Well Straler

Well Straler RC-16B Manuale utente

EUROM

EUROM 333299 Manuale utente

Heylo

Heylo K 170 Manuale utente

Eterna

Eterna TR70W Manuale utente

Clarke

Clarke GRH15 Manuale di istruzioni

IRSAP

IRSAP The Radiator Company Ovali Manuale utente

Empire Heating Systems

Empire Heating Systems WCC65 Manuale utente

Wetekom

Wetekom 92 86 43 Manuale utente

Desa

Desa SPC170-F Manuale utente

Watlow

Watlow Watrod Electric Tubular Heaters Manuale utente

Haverland

Haverland ECO-DRY GPS Series Manuale elenco delle parti

Stelpro

Stelpro ASILVC2060 Series Manuale utente