Dingheng DHM-15B Manuale utente

DHM-15B HEIGHT AND WEIGHT MACHINE

Model: DHM-15B

Ultrasonic Electronic Height and Weight Body Scale

USER

MANUAL

Installation and Adjustment

THANKS FOR USING OUR HEALTHCARE PRODUCTS

DHM-15B HEIGHT AND WEIGHT MACHINE

Mainframe-

Saddle-

Picture 1 Picture 2

Height sensor

Blood

Pressure

Picture 3 picture 4 picture 5 picture 6

Installment instruction:

First: Open the packaging bag and check all the components.

Second: Connect mainframe and saddle with M8 screw (picture1), insert the sensor to

DHM-15B HEIGHT AND WEIGHT MACHINE

the bottom of the saddle. (picture2)

Third: Insert height-measuring component to the two holes on the top of the

mainframe, then fix them with four M4 screws. Then connect the wire of the

height-measuring component with the mainframe. (picture6)

Diagram of the main board:

Operation

Startup: Connect the power wire and switch on; the screen will display the

information of beginning. The height screen will display 0122 which refers to the

date.The weight screen will display 17:30which refers to the time.

Attention: Make sure that the voltage of the power source is 12V and nothing on the

saddle.

Measurement: the scale enters into the measurement state when puts in fixed number

of coins. The scale begins to measure the height and weight after person standing on

the saddle. After the measurement of height and weight, some sound will hint you.

DHM-15B HEIGHT AND WEIGHT MACHINE

The results can be spoken out and printed.

(Please refer to the measuring diagram as follows)

First Second Third Fourth

Please pay attention when measuring:

First: Put the coin. After entering into the measuring state, if there is no measuring in

20 seconds (nothing on saddle), the scale will exit measuring state

automatically.

Second: Measure height and weight. Standing stable and do not move or speak to get

an accurate result.

Third: Measure blood pressure and pulse. After measuring height and weight, put

right arm in the arm hole of the blood pressure meter, and then press the key on

the left side of shell. The machine begins to measure. It takes a while to

measure. During the process, please relax yourself and do not move or speak to

get an accurate result. If it fails, press the key again and measure again. The

entire measuring process finishes after the results showing on the screen.

Attention: If there is no blood pressure button in 30 seconds, or Press the

button for 2 seconds, the machine will exit the measurement.

Fourth: Take the print ticket.

Pronunciation: It can speak out the measurement results automatically (also can be

set without pronunciation), under the state of waiting they can speak out welcome

DHM-15B HEIGHT AND WEIGHT MACHINE

continuously. Please read the functional setting (function code 6) to get the method of

setting volume and time interval of pronunciation “welcome”.

Print: It can print the measurement results and the total calculating figures.

Color lights control: Press ESC to turn on or turn off the color lights when the

machine is not in the working condition (not measure or adjust).

Function setting and adjustment:

All functions are set and adjusted by keys on the main board( + -

SEL ENT ESC ）.Please look at the diagram of the main board.

Menu Introduction: There are 12 items in the menu and you can enter into the main

menu codes selection by pressing ENT under the state of waiting. (Range: 1-12)

Date adjustment:

Choose menu code 1-01 ，press ENT to into the state of adjustment. Display 0603

in height screen and the setting display screen means the present date is Mar, 2006.

Flickering means they are under the state of adjustment.

Press + or - , the date will be adjusted to present date.

Press SEL, change the needed number of year, month, day and week continuously.

Press ENT, store and exit. Press ESC exit without store.

Time adjustment:

Choose menu code 1-02 ，press ENT into the state of adjustment.

Display 17:05 in setting display screen means the present time. Flickering means they

are under the state of adjustment.

Press + or - , the time will be adjusted to present time.

Press SEL, change the needed number of minutes and hours continuously.

Press ENT, store and exit. Press ESC exit without store.

Weight adjustment:

Choose menu code 1-03 ，press ENT into the state of adjustment.

DHM-15B HEIGHT AND WEIGHT MACHINE

Display 500 in the height screen means the present corrected value is 500 (range:

1-999).Display 0.00 in weight screen means the present weight. Put something

with confirmed weight on the saddle. After a stable weight display, press + or – to

adjust the display data.

You can press SEL when it is required to measure again.

Press ENT store and exit. Press ESC exit without store.

After the adjustment, please see the corrected value, if it reaches the maximum figure,

there may be something wrong with the scale.

Height adjustment:

Choose menu code 1-04 ，press ENT into adjustment state.

Display 00.0 in the height screen means the present height. Display 120 in the weight

screen means the present corrected value is 120(scale: -400-400). Put something with

confirmed height on the saddle. After a stable height display, press + or – to adjust the

display data.

You can press SEL when it is required to measure again.

Press ENT store and exit. Press ESC exit without store.

The division is 0.1cm.After the adjustment, please see the corrected value, if it

reaches the maximum figure, there may be something wrong with the scale.

Pronunciation interval setting:

Choose menu code 1-05 ，press ENT into adjustment state.

Display 4 in weight screen means the present parameter is 4 with a scope of

0-50. The display value 4 means the interval of pronouncing “welcome” is 20 seconds.

The present value multiply 5 refer to the interval seconds of pronunciation

“welcome”.

Press + or - adjust the present value into that of needed.

Press ENT ，store the results and exit. Press ESC exit without being stored.

Pronunciation setting:

DHM-15B HEIGHT AND WEIGHT MACHINE

Choose menu code 1-06 ，press ENT into adjustment state.

Display 1 in the weight screen is the present parameter(scope 0-1).Displaying 1 means

speak out the results after measurement. 0 means scale will not pronounce.1 means

the scale speaks out the results after measurement. Press + or - , to adjust the

present value that of needed.

Press ENT, store and exit. Press ESC exit without store.

High value setting of bodily form index:

Choose menu code 1-07 ，press ENT into adjustment state.

Display 25.0 in the weight screen means high value of bodily form index (range:

19.0-28.0).Flickering means under the state of adjustment. For instance, the normal

height scope is 1.7 meter: high value of body index multiplies height value’s

square-low value of bodily form index multiply height value’s square.

Press + or - adjust the display value into that of needed.

Press ENT ，store results and exit. Press ESC exit without being stored.

Press SEL, enter into setting of body index.

Low value setting of bodily form index:

Choose menu code 1-08 ，press ENT ，into adjustment state.

Display 19.0 in the weight screen is the low value of bodily form index (scope:

15.0-22.0). Flickering means under a state of adjustment.

Press + or - adjust the present value into that of needed.

Press ENT ，store results and exit. Press ESC exit without being stored.

Press SEL, enter into high value setting of bodily form index.

Print setting:

Choose menu code 1-09 ，press ENT into adjustment state.

Display 5 in the weight screen is the present print parameter(scope:0-8).

Press + or - adjust the present value into that of needed.

Press ENT ，store results and exit. Press ESC exit without being stored.

DHM-15B HEIGHT AND WEIGHT MACHINE

Height

Weihgt

BMI

Ideal

weight

Normal

weight range

Coin setting:

Choose menu code 1-10 ，press ENT into adjustment state.

Display 1 in the weight screen is the present coin machine parameter (scope:

0-10).0 means no need to put coin, 0 means set up the needed coin quantity.

Press + or - will adjust the present value into that of needed.

Press ENT ，store results and exit. Press ESC exit without being stored.

Examine quantities of people being measured:

Choose menu code 1-11 ，press ENT into examination state. Display 168 in the

height screen means the total times of measurement is 168. With 18 in the weight

screen is the part measurement numbers (the measuring amount between the former

measure and the later examination.) range of total measuring quantity: 0-9999, return

to 0 once beyond this scope.

Press SEL can print out total quantity of measurement (clear part measurement result)

and date.

Press ENT ，store results and exit. Press ESC exit without being stored.

DHM-15B HEIGHT AND WEIGHT MACHINE

Renew set of machine:

Choose menu code 1-12 ，show 8888 on the screen.

Press ENT to renew the set of machine.

Press ESC to exit.

Volume adjustment:

Direct rotation of the upper left corner of the circuit board

Changing print paper instruction:

First: Make the axis threads the printing paper and fix them on the frame (picture 1)

Second: Open the paper roll, tear the opening place and make sure the tearing place is

flat and straight (picture 2)

Third: Put the paper in the paper slot; make sure the paper is stable during the process

of putting paper. The paper can come into the printer automatically (picture

Forth: After putting the paper, then try to print to see if the paper can come from the

out cover smoothly. If the paper can’t come out, then examine the printer to

see if the paper was blocked in the printer.(picture 4)

DHM-15B HEIGHT AND WEIGHT MACHINE

The Settings of Coin Acceptor

1. Setting

a) Turn on the machine

b) Move the switch of “MGM, NOM, MAX” at the rear part of the coin

acceptor to the position of “NOM”, and then move the switch of “set,

start” to the position of “set”.

c) Choose coins of different versions and degrees of wear, and then use

these coins (both the front sides and the reverse sides) to try the coin

acceptor, the coins will come out from the outlet at the bottom of the

acceptor. If the acceptor produces a sound like “di”, it indicates the

successful setting. This coin acceptor can remember as many as 45

kinds of coins.

d) At the end please move the switch of “start, set” to the position of

“start”.

2. Clearance

a) Move the switch of “MGM, NOM, MAX” at the rear part of the coin

acceptor to the position of “NOM”, and then move the switch of “start,

set” to the position of “set”.

b) Press the key of “clearance” (besides the label 145) on the side of the

acceptor for 5 seconds, until you hear the sound like “di”, which

indicates the original memory has been cleared. You’d better firstly

clear the memory before resetting so that the acceptor can remember

coins as many as possible.

3. Usage

Move the switch of “MGM, NOM, MAX” at the rear part of the coin

acceptor to the position of “NOM”, and then move the switch of “start,

set” to the position of “set”. Test the acceptor with coins which are settled

in the acceptor’s memory. If the coin is false, the acceptor will spit it out

automatically.

Attention: before leaving the factory, the coin acceptor has already been

set by the manufacturer, so please do not adjust it at ease. If the coin

acceptor makes a warning sound, firstly please cut off the power supply

and then make checks as below: whether the switch of “start, set” is

moved to the position of “start”; whether the wire of power supply is

Indice

Altri manuali Dingheng Scala

Dingheng

Dingheng DHM-30A Manuale utente

Manuali Scala popolari di altre marche

AWS

AWS ZEO-50 Manuale utente

Gima

Gima Glass Body Fat Analyzer Manuale elenco delle parti

Seca

Seca 374 Manuale utente

TEC

TEC TEC SL59 SERIES Manuale utente

Axis

Axis B/E Series Manuale utente

Alecto

Alecto ACW-40 Manuale utente

Rice Lake

Rice Lake MSI-4260 IS Manuale utente

IKA

IKA RCT basic safety control Manuale utente

ADE

ADE M20011 Manuale utente

Duronic

Duronic KS3000 Manuale utente

Digi

Digi SM-720 Manuale utente

Cardinal

Cardinal CS Series Manuale utente

Korona

Korona Kastella Manuale utente

A&D

A&D FC-50Ki Manuale utente

BDA

BDA CAMARGUE Manuale utente

Tanita

Tanita HD-357 Manuale utente

Leifheit

Leifheit 03173 Manuale utente

Lumme

Lumme LU-1340 Manuale utente