START UP. Models with Digital Controller
1- Put the main switch of the plate in the OFF position. Connect the rear power outlet to the network, 230V-
50/60Hz, with the supplied cable. Install the Pt100 probe in the models with an external probe using the
bar and bracket included.
2. - Check the operation of the temperature controller
ORDERING INFORMATION / MAINTENANCE SPARES
Before proceeding to any exam or repair it is necessary to disconnect of the mains. All initiative should be made by
qualified personnel to avoid bigger wrongs.
Trust their apparatus to a technical service authorized by DINKO Instruments.
Code Description
Spares
1.8040.00 Support rod
1.0050.16 Digital temperature controller PID
1.0090.01 Heating unit for D-35.
1.0090.02 Heating unit for D-39.
1.0061.02 Relay
1.8110.00 Temperature probe, external, 1 m cable Pt100.
1.8110.01 Temperature probe, external, 1 m cable Pt100 gel/glass anti-acid.
1.8041.00 Support for external temperature probe.
1.0053.01 Thermostat.
1.0042.04 Fan for D-35.
1.0042.02 Fan for D-39.
Ordering
1.8425.00 Hotplate 145mm Ø. D-35
1.8425.04 Hotplate 145mm Ø. D-35D
1.8426.00 Hotplate 180mm diam. D-39
1.8426.01 Hotplate 180mm diam. D-39D
1.8079.00 Sand Bath, round 20cm Ø
1.8079.10 Sand Bath, round 20cm diam. PID controller
1.8079.01 Steel chamber 20cm dia. Code 1.8079.01
Note
Disposal of Waste Electrical and Electronic Equipment by users in private households in the
European Union
This symbol on the product or on the packing indicates that this cannot be disposed of as household waste. You must
dispose of your waste equipment by handling it over to the applicable take-back scheme for the recycling of electrical
and electronic equipment. For more information about recycling of this equipment please contact your city office, the
shop where you purchased the equipment or your household waste disposal service. The recycling of materials will
help to conserve natural resources and ensure that it is recycled in a manner that protects human health and
environment.
WARRANTY
WHAT IS COVERED:
This product is guaranteed to be free of defect in workmanship and materials under normal use for a period of one year
from the date of purchase by the consumer. During the warranty period, the manufacturer will repair or, at their option,
replace at no charge a product that proves to be defective, provided you return the product, shipping prepaid, to an
authorized service center.
WHAT IS NOT COVERED:
Instruments subjected to misuse, buse, neglect or unauthorized repair or modifications will be excluded from this
warranty. Also excludes expendables, consumables. The liability of Dinko is limited to repair or replacement and in no
event shall Dinko be liable for any collateral or consequential damages or loss.
