CAFELLO TUTTOV2
5
USING THE MACHINE
1. Open up the steam tap and leave it open until steam starts
to come out from the steam wand. You can now close the
steam tap and watch the pressure gauge which should rise
to between 1.5 and 2 bar. The machine will now be hot and
ready to use.
2. Find the grinder hopper* and place it into the grinder on the
top part of the TuttoV2. Line the arrow on the hopper up with
the arrow on the TuttoV2. You should now be able to turn the
hopper clockwise and lock it into place.
3. Make sure the tamper lever* is in the UP position. You can
now fill the hopper with coffee beans. You can adjust how
coarse the grind is by rotating the hopper to the left or
right. Only change the grind setting whilst the grinder is in
operation to avoid any coffee getting jammed.
4. Now slide the group handle* into the front of the machine.
You can now press the Grind button to grind directly into
the group handle. If you navigate to the DOSAGE menu, you
can adjust how long the grinder will run for.
5. After you have ground the coffee you can now pull down on
the Tamper lever, then pull up the Tamper Lever and tamp
once more to remove excess coffee from the chute. Leave it
in the DOWN position then select a either Single or Double.
6. Place a cup under the spouts of the group handle. You can
now press either the ‘Single Shot’ or ‘Double Shot’ buttons
to start the coffee brewing. You can set either of these
buttons to your desired cup volume by navigating to the
DOSAGE MENU.
*Please refer to the images on the next page.
