Direct Supply Attendant SOLO-DS Manuale utente
Attendant®
BLUETOOTH
COLUMN SCALE
Please keep and refer to this Owner’s Manual.
Owner’s Manual
Thank you for purchasing an Attendant®Bluetooth Column Scale. Please read this entire guide carefully and keep it
for future reference. This guide will provide you with instructions, warnings, warranty information and other important
information about your Attendant®Bluetooth Column Scale. Share this information with those individuals who will be
assembling, using, servicing and/or cleaning the Product to help ensure it is cared for properly.
1-800-245-9917
FCC ID:2AWG7-SOLO-DS
Model Name: SOLO-DS
2
Table of Contents
Table of Contents
Introduction .............................................................................................................................. 3
Definitions and Symbols........................................................................................................... 3
Warnings .................................................................................................................................. 4
Proper Disposal ........................................................................................................................ 4
FCC Compliance Statement..................................................................................................... 4
Specifications ........................................................................................................................... 5
Features .................................................................................................................................. 5
Installation .........................................................................................................................6 - 10
Unpacking ............................................................................................................................ 6
Assembly .........................................................................................................................7 - 9
Installing The Carpet Feet................................................................................................... 10
Optional Handrail Installation...........................................................................................11 - 12
Unpacking ........................................................................................................................... 11
Installation....................................................................................................................11 - 12
Unit Selection......................................................................................................................... 13
Battery Operation................................................................................................................... 14
Installation/Replacement..................................................................................................... 14
Low Battery ........................................................................................................................ 14
Automatic Shutoff............................................................................................................... 14
Optional AC Power Adapter................................................................................................... 15
Operation.........................................................................................................................16 - 20
Keypad Functions ............................................................................................................... 16
Annunciators....................................................................................................................... 17
Weighing Mode .................................................................................................................. 18
Height and/or BMI Measure Mode..................................................................................... 19
Optional BMI Mode ............................................................................................................ 19
Height Rod Operation......................................................................................................... 20
Setup ...............................................................................................................................21 - 22
Calibration........................................................................................................................23 - 24
Data Transmission Format ..................................................................................................... 25
Bluetooth Low Energy............................................................................................................ 26
Display Messages .................................................................................................................. 27
Troubleshooting...................................................................................................................... 28
Care and Cleaning .................................................................................................................. 29
Limited Warranty.................................................................................................................... 30
Customer Service................................................................................................................... 31
3
1-800-245-9917
Introduction
Thank you for purchasing the Attendant®Bluetooth Column Scale. This scale has been tested before
leaving the factory to ensure accuracy and dependability for years to come.
In this owner’s manual, you’ll find important information you should read before assembling or using
this product. Please keep this manual in a safe place for future reference.
If at any time you do not understand how to use this product, or you suspect it may be damaged,
DO NOT USE and immediately contact the distributor that sold this product to you.
This owner’s manual is compiled from the latest specifications and product information available at the
time of publication. Changes may be made to this manual at any time. Contact your distributor for a
current copy of this owner’s manual.
Definitions and Symbols
NOTE: Indicates a tip.
CAUTION: Indicates correct operating or maintenance procedures in order to prevent damage to
or destruction of the equipment or other property.
WARNING: Calls attention to a potential danger that requires correct procedures or practices in order to
prevent personal injury.
:Attention. Read the instructions.
:Electrical Shock Hazard Warning.
Device: Your Attendant Bluetooth Column Scale
We, Us and Our: Direct Supply Manufacturing, Inc.
You means the user, caregiver or any other individuals who will be using or servicing the product.
Distributor means the reseller or other entity from whom you purchased this product.
Medical Professional: The physician or other healthcare professional who is familiar with the user’s
medical history and current medical condition, and who is responsible for determining if this product is
medically appropriate for the user.
Caregiver: The individual(s) responsible for the care and needs of the user, such as a spouse,
adult family member or home health aide. The caregiver must be available at all times to provide
the user with physical and cognitive assistance and provide supervision as needed.
User: The individual who uses the device.
Serial Number
Date of Purchase
Purchased From
RETAINTHIS INFORMATION FOR FUTURE USE
Introduction
4
Warnings, Proper Disposal &
FCC Compliance Statement
Warnings
Read and follow all directions and warnings before use or assembly. Do not use or assemble if you do
not understand the contents of this manual – contact your distributor for assistance. Damage, injury,
or even death may result from improper use of this product or not following directions and warnings.
This product is intended for use in normal, indoor conditions.This product may not be appropriate for
all individuals.
WARNING: Prior to use of this product, the User’s Medical Professional should be consulted to
ensure this product is appropriate for the User’s specific needs based upon his or her overall medical
condition and limitations.
Proper Disposal
When this device reaches the end of its useful life, it must be properly disposed of. It must not be
disposed of as unsorted municipal waste. Within the European Union, this device should be returned
to the distributor from where it was purchased for proper disposal.This is in accordance with EU
Directive 2002/96/EC. Within North America, the device should be disposed of in accordance with the
local laws regarding the disposal of waste electrical and electronic equipment.
It is everyone’s responsibility to help maintain the environment and to reduce the effects
of hazardous substances contained in electrical and electronic equipment on human
health. Please do your part by making certain that the device is properly disposed of. The
symbol shown to the right indicates that this device must not be disposed of in unsorted
municipal waste programs.
FCC Compliance Statement
This equipment generates, uses, and can radiate radio frequency and if not installed and used in
accordance with the instruction manual, may cause interference to radio communications. It has
been designed within the limits for a Class A computing device pursuant to Subpart J of Part 15 of
FCC rules to provide reasonable protection against such interference when operated in a commercial
environment. Operation of this equipment in a residential area may cause interference in which case
the user will be responsible to take whatever measures necessary to correct the interference.
You may find the booklet “How to Identify and Resolve Radio TV Interference Problems” prepared by
the Federal Communications Commission helpful. It is available from the U.S. Government Printing
Office, Washington, D.C. 20402. Request stock No. 001-000-00315-4.
5
1-800-245-9917
Specifications & Features
Specifications
Capacity: 550 lb. x 0.2 lb (250 kg x 0.1 kg)
Weight Units: Pounds or Kilograms (selectable)
Power Requirements: Six (6) “AA” size Alkaline batteries (included) OR an optional 9V
AC/DC wall plug-in adapter
Display: Five digit, seven segment, 1.0" (25 mm) high LCD
Operation Temperature: 50 to 104 ºF (+10 to +40 ºC)
Function Keys: ON/OFF, BMI HEIGHT, ENTER, LOCK/RELEASE, PRINT, ZERO,
UP ARROW and DOWN ARROW
Dimensions: 14.3"W x 19.5"D x 52.0"H
(36.3 cm W x 49.5 cm D x 132.1 cm H)
Weight: 17.7 lb. (7.7 kg)
Height Rod Units: Inch or cm
Height Rod Range: 30 to 84.5" (76 to 214.5 cm)
Features
• Low-profile platform (2.4" / 6.1 cm high)
• Body Mass Index (BMI) calculation
• OneWeigh weighing units locking into pounds or kilograms1
• Manual input height 2' 0.0" to 7' 10.5" by 0.5" (60.0 cm to 240.0 cm by 1 cm)
• Audible beep confirmation (A short beep when a key is pressed, and a long beep for when weight is
stable and locked)
• Selectable Auto Shut-Off feature (up to 9 minutes)
• Auto Weight Lock feature on stable weight
• Power-Up Zero
• USB output function (ASCII protocol)
• Bluetooth Low Energy (BLE)
• Integral wheels
• In-line mechanical height rod
• Optional handrail available
1The weighing units are selected at Scale Initialization (when the scale is powered on for the first time).
Operating frequency: 2402MHz-2480MHz
6
Installation
Unpacking
Remove Display with Upper Outside and Inside Column (1) (already assembled), Lower Inside
Column (2), Lower Outside Column (3), Scale Platform (4) and Hardware Pack (6) from shipping
carton. After removing from carton, check for any damage that may have taken place during
shipment. Keep and use the original carton and packing material for return shipment if it should
become necessary. Remove all plastic wrapping, foam fillers and cardboard material from scale
platform, display and other components.You should have the following components:
1 – Display with Upper Outside and Inside Column (pre-assembled)
2 – Lower Inside Column
3 – Lower Outside Column
4 – Scale Platform (with Column Housing Cover)
5 – (4) Carpet Feet
6 – Hardware Pack, containing:
(4) M5 x 15 Machine Screws
(4) Lock Washers
(2) M3 x 12 Screws
1
2 3
4
5
6
7
1-800-245-9917
Assembly
Step 1
1. Align Part 2 (lower inside column) with Part 1 (pre-assembled display upper outside display upper
outside display upper outside display upper outside display upper outside display upper outside
and inside column and inside column ).
2. Press the parts together until the locking tab snaps in place.
3. Ensure that the locking tab is locked securely.
Ensure locking tab is
securely locked.
1 2
3
8
Installation(cont.)
Step 2
1. Align Part 3 (lower outside column) with assembled Part 1 and 2 (display upper outside and inside
column, and lower inside column).
2. Press the locking tab (on Part 2, lower inside column) inward and then insert into Part 3 (lower
outside column).
3. Slide the cable connector through Part 3 (lower outside column).
4. Press Part 3 and Part (1 and 2) together until the locking tab snaps in place.
5. Ensure that the locking tab is locked securely.
6. Install (2) M3 x 12 machine screws (one in each side of Part 3) to secure Part 1 and 2 together
with Part 3.
1
2
3
5
6
4
Press locking tab inward to
insert Part 2 into Part 3.
Slide the cable connector
through Part 3.
Ensure locking tab is
securely locked.
Install (1) M3 x 12 screw on
each side of Part 3.
9
1-800-245-9917
Step 3
1. Plug the cable connector into the RJ jack located on the Part 4 (scale platform).
2. Align the display and assembled column with Part 4 (scale platform) and insert the column into
opening of the scale platform.
CAUTION! To avoid pinching or cutting the cable, make sure the cable is not between the base
and column when inserting the column into the base.
3. While holding the column in place, carefully lay the scale down with the column horizontal to floor.
4. Attach the column to the scale platform by inserting the (4) M5 x 15 machine screws and lock
washers through the holes in the scale platform into the threaded holes of the column.Tighten
the screws to secure the column to the scale platform.
The scale should be placed on a flat, level hard-surfaced floor or low-cut, unpadded carpet, away from
any rapidly moving air source (heating and cooling vents).
2
3
4
1
CAUTION! Make sure
cable is not between base
and column.
Scale Assembly, Step 3
10
Installing the Carpet Feet
If you are using your scale on a carpet, it is recommended to use the included carpet feet. To install the
carpet feet, perform the following:
1. Remove the four (4) carpet feet from the packaging.
2. Align the prongs of one carpet foot with the holes in one of the scale’s existing feet.
3. Insert the carpet foot prongs into the holes, making sure the prongs align straight up and down with
the holes of the scale foot.
4. Being careful not to twist the carpet foot, with even pressure, gently push straight down on the
carpet foot to seat it into the scale foot.
5. Repeat steps 2 through 4 for the remaining three scale feet.
Installation(cont.)
Indice
Altri manuali Direct Supply Scala
