Assembly Instructions
①
A
B
C
D
Screw holes
Back screw hole
1. Use Allen wrenches (M), screws (H) and washers (J) to connect the four
side panels (A) (B) (C) (D)
2. Place the side with the Velcro upwards.
3. The bolts near the Velcro on the inside of the side panels (C) (D) should
be close to the back panel (A).
4. Back panel (A) and the front panel (B) are not the same. There are screw
holes on the top of the back panel (A) for connecting the top panel (F)
5. Please do not tighten all the screws after connecting all side panels.
Velcro on top
*Note: Please do not tighten all the screws before the products is fully
installed, for it may cause assembling issues.
Side screw hole
