Displax PAD Manuale utente

TECHNOLOGY FOR THE MULTITOUCH GENERATION

DISPLAX PAD

USER GUIDE

MKT.246.1 | DISPLAXTM PAD USER GUIDE 2

PACKING LIST........................................................................................................................3

GENERAL INFORMATION.................................................................................................4

HANDLING INSTRUCTIONS ...................................................................................................................4

TOOLS REQUIRED.....................................................................................................................................4

DOWNLOAD USER GUIDE AND DRIVERS.......................................................................................4

OTHER INFORMATION.............................................................................................................................5

PRODUCT DESCRIPTION.................................................................................................6

DISASSEMBLING & ASSEMBLING................................................................................9

HOW TO OPEN PAD..................................................................................................................................9

HOW TO REMOVE OR ASSEMBLE PC..............................................................................................9

HOW TO ACCESS THE PCB..................................................................................................................9

HOW TO REMOVE OR CHANGE LCD..............................................................................................11

SETTING UP DISPLAX PAD...........................................................................................12

SKIN MULTITOUCH CONFIGURATION....................................................................13

CARE & HANDLING..........................................................................................................14

SUPPORT..............................................................................................................................15

WARRANTY..........................................................................................................................16

MKT.246.1 | DISPLAXTM PAD USER GUIDE 3

PACKING LIST

This DISPLAX Pad shipment contains the following equipments/components:

Pad 1 unit

Remote control 1 unit

3D glasses* - 1 unit

* When technology available in LCD shipped

MKT.246.1 | DISPLAXTM PAD USER GUIDE 4

GENERAL INFORMATION

HANDLING INSTRUCTIONS

Due to the product weight, carrying and assembling DISPLAX Pad should be made by 2

persons.

Never place DISPLAX Pad with the glass facing down. Always make sure the unit is placed in

a surface clean and free of debris to avoid scratching or damaging.

Always make sure the back is properly attached to the trim before moving your Pad.

TOOLS REQUIRED

DISPLAX Pad is shipped assembled and ready to use. If you need to do any maintenance or

exchange PC or LCD, you will need the following tools:

Unbrako / hex key (not included), size 6 and size 2.

DOWNLOAD USER GUIDE AND DRIVERS

USER GUIDE

Make sure you download and read the DISPLAX Pad User Guide before assembling your

unit:

http://www.displax.com/downloads/UserGuides/DisplaxPad.php

MKT.246.1 | DISPLAXTM PAD USER GUIDE 5

DRIVER

DISPLAX Pad uses DISPLAX Skin Multitouch as the touch detection technology. To

download the most updated drivers

unit is an Intel NUC 64 bits with Windows 8 Pro.

If you are not using the default PC unit make sure to check the architecture of the processor

and select the correct driver.

http:// support.displax.com/downloads.php

SKIN MULTITOUCH USER GUIDE

The User Guide can be downloaded to answer any questions regarding the touch

technology.

http://www.displax.com/downloads/UserGuides/DisplaxSkinMultitouch.php

OTHER INFORMATION

LCD manufacturers require that LCDs used in portrait mode be mounted like this. Non

compliance may result in lost of warranty

The serial number is placed in the back.

MKT.246.1 | DISPLAXTM PAD USER GUIDE 6

PRODUCT DESCRIPTION

A. Structure

a. Glass (with Skin Multitouch foil laminated)

b. Stainless steel trim

c. Speakers**

d. Cables opening

B. LCD

a. HDMI cable

b. Power cable

c. Remote control

d. 3D glasses*

C. Intel NUC

a. Power cable

D. Printed Circuit Board (Skin Multitouch PCB controller)

a. USB cable

E. Metallic beam (2)

F. Carbon steel back

a. PCB removable cover

b. LCD removable cover

G. USB extension cable

* When technology available in LCD shipped

-in on LCD

MKT.246.1 | DISPLAXTM PAD USER GUIDE 7

MKT.246.1 | DISPLAXTM PAD USER GUIDE 8

MKT.246.1 | DISPLAXTM PAD USER GUIDE 9

DISASSEMBLING & ASSEMBLING

DISPLAX Pad is shipped ready to use. However, you may need to do disassemble and

reassemble the product.

DISPLAX Pad uses the following screws:

I. M3 12mm, unbrako 2 - 37 units

II. M8 12mm, unbrako 6 - 4 units

III. M8 20mm, unbrako 6 -

IV. M6 20mm, unbrako 5 -

HOW TO OPEN PAD

Open Pad by unscrewing the 37 M3 screws from

. Beware that

and

are loose.

Remove both

units by unscrewing the 4 screws in the center (III or IV, depending on the

Pad size) and the 4 M8 12mm from the edges.

You now have full access to the interior of Pad and can disassemble everything.

Cautions to have:

Be careful not to damage the Skin Multitouch tail (the orange cable that has the PCB

controller attached.

Be careful when holding the LCD to avoid leaving fingerprints on the screen

When reassembling DISPLAX Pad, be careful when screwing the 37 M3 screws.

For best results start all the screws on their holes without fully tightening them. Then

once all are in place, tighten gradually alternate screws until all are firmly fixed.

HOW TO REMOVE OR ASSEMBLE PC

Unscrew

to access the PC.

HOW TO ACCESS THE PCB

Unscrew

to access the PCB.

Remove the USB cable.

MKT.246.1 | DISPLAXTM PAD USER GUIDE 10

Carefully lift the 2 clamping clips (grey bar) as shown on the following picture, taking care not

to over extend the clamping clip.

Make sure you connect the sensor to the controller at the correct side. The orientation is clear

by comparing the DISPLAX logotype position at the ribbon cable and at the controller board.

Align the position of the controller connectors with the orange ribbon cables.

Gently insert the ribbon cables into position. Once the ribbon cable is inside the connector,

press down the clamping clip to lock it.

Clamping connection clips

USB

Reset button

Open position

Indice

Manuali Tavoletta popolari di altre marche

Laser

Laser MID-1060 Guida utente

MUNBYN

MUNBYN IRT09J Guida rapida

Motorola

Motorola MC3090R - Win CE 5.0 Professional 520 MHz Manuale utente

Dell

Dell Latitude ST Manuale del proprietario

Lenovo

Lenovo IdeaTab S6000L Manuale del proprietario

Venturer

Venturer WT9L11 Manuale utente

EDUGEAR

EDUGEAR UnoBook Manuale utente

Philips

Philips PI3210G/58 Manuale utente

ADLINK Technology

ADLINK Technology IMT-BT Manuale utente

TwinMOS

TwinMOS TwinTAB-T102D1 Manuale utente

Archos

Archos 9.7 xenon Manuale utente

Getac

Getac E100 Manuale utente

HANNspree

HANNspree HANNspad SN70T3 Manuale utente

Philips

Philips PI3105W2/55 Manuale utente

LG LG-V935 Manuale utente

Zeki

Zeki TBDB763B Manuale utente

Ricoh

Ricoh eQuill Manuale utente

DT Research

DT Research DT365CT Istruzioni per il montaggio