Display Mount Pro SSW004 Manuale utente

English

Installation Instruction

UNPACKING INSTRUCTIONS

! Carefully open the carton, remove contents and lay out on cardboard or other

protective surface to avoid damage.

! Check package contents against the Supplied Parts List in the next page to assure

that all components were received undamaged. Do not use damaged or defective

parts.

! Carefully read all instructions before attempting installation.

IMPORTANT SAFETY INFORMATION

! Install and operate this device with care. Please read this instruction before

installation, and carefully follow all instructions contained herein. Use proper safety

equipment during installation.

! Please call a qualified installation contractor for help if you don't understand these

directions or have any doubts about the safety of the installation.

Do not use this product for any purpose or in any configuration not explicitly specified

in this instruction. We hereby disclaims any and all liability for injury or damage arising

from incorrect assembly, incorrect mounting, or incorrect use of this product.

Supplied Par ts List

(1)Gas Spring Arm-c

(1)L Plate-e

(1)Wrist Pad-d(1) Platform-a (1) Keyboard Tray-b

(2)Spacer-l

(4)M6 Washer-m (4)M6 Nut-n

(1)Allen Key-q

(2)Square Pad-o

5mm thickness

(1)Wrench-r

(2)M6x35 Bolt-k

(8)M6x12 Bolt-i (4)M6x12 Bolt-j

(1) C-clamp-f (1) C-clamp Brace-g (2)M10x15 Bolt-h

(2)Square Pad-p

2mm thickness

Step 1 Connecting L Plate to Keyboard Tray

Warning:

Ensure screws are

secured firmly.

Step 2 Attaching Square Pads to the Back of Keyboard Tray

Step 3 Connecting L Plate to Gas Spring Arm

Warning:

Ensure screws are

secured firmly.

Warning:

Ensure screws are

secured firmly.

Step 4 Connecting Gas Spring Arm to Monitor Platform

Warning:

Don’t operate the lever until the

workstation is fully assembled.

Lever

“L” plate can be installed in two positions.

1. Install in a high position for fitting the keyboard

tray to the surface of desktop directly.

2. Install in a low position for fitting the keyboard tray

below the surface of desktop.

Step 5 Attaching Lever to the Back of Monitor Platform

Warning:

Ensure screws are

secured firmly.

Warning:

Ensure screws are

secured firmly.

Step 6 Connecting the C-clamp Brace to Gas Spring Arm

Note: The lever can be installed

eigher on the right or the left

side of monitor platform.

Step 7 Attaching the C-clamp to the Edge of Desktop

Step 8 Attaching Wrist Pad to Keyboard Tray

Step 9 Operating the Lever to Lift or Lower the WorkStation

Step 10 Adjusting the Tension of Workstation

• If the weight of the monitor(s) makes it difficult to lift the workstation, adjust the screw

at the back of the gas spring arm counterclockwise.

• If the workstation lowers too quickly, adjust the screw at the back of gas spring arm

counterclockwise.

• If the workstation doesn’t easily lower down, adjust the screw at the back of gas

spring arm clockwise.

Indice

Altri manuali Display Mount Pro Rack e supporto

Display Mount Pro

Display Mount Pro ND6455 Manuale utente

Display Mount Pro

Display Mount Pro GS352D Manuale utente

Display Mount Pro

Display Mount Pro MDM 003T Manuale utente

Display Mount Pro

Display Mount Pro LCD512-S Manuale utente

Display Mount Pro

Display Mount Pro GS-002-WALL Manuale utente

Display Mount Pro

Display Mount Pro FS411 Manuale utente

Display Mount Pro

Display Mount Pro LCD351D-STAND Manuale utente

Display Mount Pro

Display Mount Pro CURVE-D-STAND Manuale utente

Display Mount Pro

Display Mount Pro LCD482T-STAND Manuale utente

Display Mount Pro

Display Mount Pro LCD3502-T Manuale utente

Display Mount Pro

Display Mount Pro ATV-04 Manuale utente

Display Mount Pro

Display Mount Pro GS-001-WALL Manuale utente

Manuali Rack e supporto popolari di altre marche

Salamander

Salamander Acadia AC/W/L400/WH Manuale utente

Fohhn

Fohhn VAT-09 Guida utente

ricoo

ricoo FS0522 Manuale utente

AMSOIL

AMSOIL BMK-22 Guida rapida

Kargo Master

Kargo Master 48220 Manuale utente

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manuale utente

ricoo

ricoo S1222 Manuale utente

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manuale utente

VidaBox

VidaBox VB MNT FFS2 Manuale utente

Welch Allyn

Welch Allyn 48960 Manuale utente

Arkon

Arkon CM035-ST-2 Manuale utente

PROEL

PROEL PLWIN60C Manuale utente

Agilent Technologies

Agilent Technologies E2609B Manuale utente

Mustang

Mustang MV-ARM4 Manuale utente

Mounting Solutions

Mounting Solutions WRM-320 Manuale utente

Pyle

Pyle PMKSPAD1 Manuale utente

ShelterIt

ShelterIt 21208 Manuale utente

SPL

SPL RackPack?4 1040 Manuale utente