Diva DWMUL6 Manuale utente
FULL HD MEDIA PLAYER
DIVA 3D PREMIUM V.2
Page | 2
Table of Contents
1. INSTALL HDD (OPTIONAL).......................................................................3
2. CONNECTION.............................................................................................5
3. POWER ON/ OFF........................................................................................8
4. REMOTE CONTROL...................................................................................8
5. SETUP.......................................................................................................13
6. HOME MENU.............................................................................................18
7. BIT TORRENT...........................................................................................29
8. STREAMING VIA NETWORK...................................................................32
9. STREAMING VIA UPNP/DLNA-SERVER.................................................33
10. ANDROID APK INSTALLATION ............................................................35
11. UPDATING FIRMWARE .........................................................................38
Page | 3
In this guide, we will cover some of the basics from setting up to simple usage of the HD Media
Center.
1. INSTALL HDD (OPTIONAL)
Although optional, the HD Media Center allows more features to be accessed with installation
of an internal HDD (Hard Disk Drive). The Media Center takes any standard 3.5” HDD up to
3TB of capacity.
1.1 HDD INSTALLATION
a) To access the drive bay, simply remove the hot swap HDD drive tray on the side of the
Media Center.
b) Mount your HDD with provided screws to the drive tray and simply slide it back in to
the bay.
1.2 HDD FORMAT
For users who wish to install a new SATA HDD into the player, first you need format the hard
disk on the player before usage. Otherwise many functions can’t be used, such as BT
Page | 4
download, video podcast download. Please refer to the following procedures to format the
hard disk.
a) Select OK on the Warning page, press OK to confirm.
Note: This page can be also accessed via Setup->System-> Format menu.
A password needed when you try to format the HDD, please refer to ’3.1.5 MISC ’ for more
details about the password.
b) Press the up / down button to adjust the capacity of time shift buffer.
Press the left / right button to select Next, and the OK button to confirm.
c) Select Format, press OK, and then hard disk format will start.
Page | 5
The formatting procedure will be finished within a few minutes. And then you can use the hard
disk properly on the player.
Note: HDD format will remove all data stored on the hard disk drive. Please take care and
backup your data in advance!
2. CONNECTION
2.1 CONNECTIN G THE PO WER SUPPLY
Connect the AC adaptor to the player’s DC -IN jack.
2.2 CONNECT TO YOUR T V AND AV RECEIVER
There are many ways connect your HD Media Center to your home entertainment system.
Depends on your setup, we recommend following connection methods.
For connecting directly to TV:
Composite Video with RCA Audio
Components Video with RCA Audio
HDMI
For connecting to AV receiver:
Composite Video with RCA Audio
Components Video with RCA Audio or/ S/PDIF Toslink/ Coaxial Digital Audio
HDMI
Video Output
Audio Output
Composite out: up to 480i
RCA: Stereo
Components out: up to 1080i
S/PDIF Toslink/ Coaxial Digital Audio: Dolby
Digital, DTS 5.1
Page | 6
HDMI: up to 1080p
HDMI: Dolby Digital, DTS 5.1/ 7.1/ HD Audio
2.3 CONNECTIN G TO HOME NETWORK
You can connect HD Media Center to your home network via wired or wireless connection.
For wired connection to your home network:
a) Connect Ethernet cable to the device’s RJ45 port.
b) Turn on Device, and your home page should indicate a network cable is connected.
c) Go to “Setup” -> “Network” -> “Wired LAN Setup” select “Auto DHCP” and “Auto DNS”
to let your router automatically assigned IP address to the device. For setup manually
select “Manual DHCP” and “Manual DNS” for customized settings.
For wireless connecting to your home network:
a) Connect USB Wireless Adapter (or a compatible WIFI adapter) to one of the USB port.
b) Once connected, a short prompt will indicate the device is now connected with a USB
WIFI adapter.
c) Go to “Setup” -> “Network” -> “Wireless Setup” After a brief scanning process, you
should be prompted with a list of wireless network in your area. Select the one you’d
like to join.
d) If the wireless network is protected, you will then prompt to enter the security phrase.
Page | 7
2.4 CONNECTING TO A PC ( REQUIRE S HDD)
With a HDD installed, you can connect your HD Media Center to a computer and use it like any
external USB storage.
a) Make sure the player is powered on.Pls do not connect it to any other device .
b) Plug in the USB data cable to the rear data port on your HD Media Center.
c) Connect the player to your desktop or Laptop computer’s USB port.
d) Once connected, your operating system will automatically recognize your Media
Center as an external storage device. You can now manage the drive like any other
external storage device.
2.5 CONNECTING A USB DEV ICE
a) Make sure the player is powered on.
b) Plug in the USB pen drive, USB external HDD, USB Optical Drive etc. to any of the
USB port on the device.
c) Browse the contents of the device via file manager
2.6 CONNECTING A MEMORY CARD
a) Make sure the player is powered on.
b) Insert memory card into the built in memory card reader.
Page | 8
c) Browse the contents of the device via file manager.
3. POWER ON/ OFF
3.1 POWER ON
You can turn on the unit by switching the toggle switch to the ‘ON’ position represented by the
symbol “I”. After greeted by the initial boot screen, you should be promoted to the home screen
after a brief moment.
3.2 POWER OFF AN D STANDBY
To completely turn off the power to the unit, switch the rear toggle switch to the “O” Position.
Or you can put the unit on standby by either pressing the RED POWER button on the remote
or press the power button on the front of the panel. Upon standby, the power indication will
turn RED.
4. REMOTE CONTROL
Page | 9
No.
Name
Function
1
Eject
Press to STOP connected Storage Device, then safely remove it.
Press and hold for 2 seconds to eject disc if an optical drive is plugged in
(i.e. USB CD/DVD- ROM).
2
Mute
Press to mute audio output.
3
EPG
Only available for DTV Model
Press to view the Electronic Program Guide
Page | 10
Press again to back to DTV
4
REC
Only available for DTV Model
Press to RECORD TV program
5
Zoom
Press to ZOOM in/out when playing back photos or Videos.
Photo zoom levels: 2X, 4X, 8X, 16X
Video zoom levels: 2X, 3X, 4X, 8X.
6
TV System
Press to switch between supported output resolution from 480p-1080p.
7
Numeric
Press to enter channel numbers or numeric input when changing settings
8
Bookmarks
Add Mark to the files which have already viewed.
9
Previous
Press to go the PREVIOUS file or chapter.
Press for PREVIOUS page during file browsing.
10
FR
Press to FAST REWIND.
Press repeatedly to go 2x, 4x, 8x, 16x, 32x rewind speeds.
11
Setup
Press to access SETUP at any time. Press return to exit.
12
FF
Press to FAST FORWARD.
Press repeatedly to go 2x, 4x, 8x, 16x, 32x rewind speeds.
13
Guide
Press to view the Guide menu. See “The Guide Menu” on page 6 for
more details.
14
Option
Press to bring up the OPTION bar.
15
Left (Arrow)
Press the arrow buttons to navigate the menus
Indice
