Dive Rite HP50 Manuale utente
July 2017 – Rev A
24 Watt LED
24 Watt LED24 Watt LED
24 Watt LED
Lighting System
Lighting SystemLighting System
Lighting System
USER MANUAL
USER MANUALUSER MANUAL
USER MANUAL
www.diverite.com
July 2017 © Lamartek, Inc. dba Dive Rite 2
T is is t e user manual for t e Dive Rite HP50 Lig ting System.
T is user manual is proprietary and copyrig t Lamartek, Inc. 2017. It may not
be reproduced, c anged, or distributed wit out aut orization from
Lamartek, Inc.
All information contained in t is manual as been carefully reviewed and is
believed to be accurate, owever it is subject to c ange. Diving tec nology is
constantly and rapidly evolving. Please c eck www.diverite.com to ensure
t at you ave t e latest version of t is manual.
Companies and/or product names cited in t e manual are trademarks
belonging to t eir respective companies.
T e HP50 Lig ting System is manufactured in t e USA by:
Lamartek, inc. dba Dive Rite
175 NW Was ington Street
Lake City, FL, 32055 USA
P one (386) 752-1087
www.diverite.com
www.diverite.com
July 2017 © Lamartek, Inc. dba Dive Rite 3
Table of Contents
Product Description ........................................................................................ 4
Tech Specs ....................................................................................................... 5
Important Warnings ....................................................................................... 8
Charging & Maintaining the Batteries ............................................................ 9
Installing the Batteries .................................................................................
Mounting the Canister .................................................................................. 3
Adjusting the Hand Mount ........................................................................... 4
Hand Mount Attachment ............................................................................. 5
Light Operation ............................................................................................. 6
Care, Maintenance, & Storage ..................................................................... 7
Dealing with a Flooded Light ........................................................................ 8
Warranty Information .................................................................................. 9
www.diverite.com
July 2017 © Lamartek, Inc. dba Dive Rite 4
Product Description
Brig ter. Smarter. Modular. T e HP50 Lig ting System is completely
adaptable to any dive mission. By removing t e and eld battery pack and
attac ing t e corded canister battery conversion, t e HP50 easily transforms
from a compact, lig tweig t travel companion to a rugged work orse
capable of boundary pus ing, multi- our tec nical dives.
A next generation, multi-die Cree XLamp XHP50 LED provides unparalleled
output, efficiency, and reliability.
T e HP50 is proudly designed, manufactured, and assembled in t e USA.
www.diverite.com
July 2017 © Lamartek, Inc. dba Dive Rite 5
Tech Specs
• Modular battery design can be easily converted from a and eld lig t
to a corded canister style lig t
• Cree XLamp XHP50.2 LED driven @ 24W produces over 3500 lumens @
6500 Kelvin
• Beam Angle: 10-degree spot
• Magnetic rotary switc activated
• Integrated microprocessor control unit monitors temperature and
battery voltage
• Blinks 3 times to indicate low battery and automatically steps output
down to increase usable burn time
• Four output modes: ig power, medium power, low power, and strobe
• Durable CNC mac ined Delrin and ard-coat anodized aluminum body
construction
• Hand eld version uses 4 independent 18650 user replaceable batteries
• Canister battery options include a 100 watt- our Slimline Li-Ion and a
150 watt- our Expedition Li-Ion. Bot battery canister options are UN
38.3 test compliant and safe for air transport. T e 100 watt- our
canister consists of two individual 50 watt- our packs and t e 150
watt- our canister consists of t ree individual 50 watt- our packs. T e
individual battery packs are internal and are not connected toget er
until t e canister lid is installed in t e activated position. W en t e lid is
installed in t e travel position (rotated 180 degrees) t e packs remain
disconnected from eac ot er.
• Improved eat sinking and cross drilled lig t ead allows water flow
t roug and provides a direct t ermal pat from t e back side of t e
LED c ip to t e water for maximum output and efficiency
www.diverite.com
July 2017 © Lamartek, Inc. dba Dive Rite 6
• Includes Soft Handmount wit Locking QRM mounting system
• Hand eld version includes padded travel case and 4 cell c arger
• Canister versions include Quick Belt Mount
• Burn Times:
o Hand eld
1.5 ours on Hig Power
3 ours on Medium Power
30 ours on Low Power
15 ours on Strobe Mode
o Slimline Canister
3 ours on Hig Power
6 ours on Medium Power
60 ours on Low Power
30 ours on Strobe Mode
o Expedition Canister
4.5 ours on Hig Power
9 ours on Medium Power
90 ours on Low Power
45 ours on Strobe Mode
• 4+ our burn time after lig t output step down from full power
• C arging time: up to 8 ours from complete disc arge
• Strobe Cycle Time: 100ms on t en 900ms off
www.diverite.com
July 2017 © Lamartek, Inc. dba Dive Rite 7
• Size:
o Hand eld Lig t:6.4 in (16.3 cm) lengt , 2.15 in (5.46 cm) diameter
o Lig t Head: 3.5 in (8.9 cm) lengt , 2.0 in (5.0 cm) diameter
o Slimline Canister: 9 in (22.88 cm) eig t, 2.6 in (6.6 cm) diameter
o Expedition Canister: 11 in (27.94 cm) eig t, 2.6 in (6.6 cm)
• Weig t:
o Hand eld: 1.4 lbs (0.64 kg)
o Slimline Canister: 3.6 lbs (1.63 kg)
o Expedition Canister: 4.3 lbs (1.95 kg)
• Buoyancy: 1.25 lbs (0.56 kg) in fres water
• Dept Rating: 500 feet (152 m)
• Li-Ion Smart C arger included
• Designed, manufactured, and assembled in t e USA
www.diverite.com
July 2017 © Lamartek, Inc. dba Dive Rite 8
Important arnings
• Read t is manual carefully before diving wit t e HP50 Lig ting System.
You s ould fully understand ow t is dive lig t works and t at you are
proficient in its use prior to diving.
• T e HP50 Lig ting System is an electronic device and electronic devices
can fail. NEVER dive t is lig t wit out at least two back up lig ts.
• T e canister batteries are O-ring sealed in t e canister wit sealed
connectors. Do not try to remove t e batteries. T e lig t is stored wit
t e batteries in t e canister.
• Do not keep t e canister lid plugged into t e battery in t e activated
position w en not in use. T e lid can be turned 180 degrees and
reinstalled for transport and storage. T e battery is not connected to
t e lig t in t is position to prevent accidental activation. Wit t e lid
installed in t is position t e internal battery packs also remain
disconnected from eac ot er.
• Before using your HP50 Lig ting System it is extremely important t at
you read and understand eac warning, as well as warnings and
cautions t at appear t roug out t e manual. Failure to do so could
result in damage to or loss of equipment, serious personal injury, or
deat .
• Before diving, you s ould ave t e proper training from a qualified
instructor and obtain certification from a recognized training agency.
• DO NOT USE THE HP50 LIGHT OUT OF WATER. Brief operation to c eck
functionality is OK, owever t e lig t ead can get extremely ot and
cause burns if used out of t e water for extended periods.
www.diverite.com
July 2017 © Lamartek, Inc. dba Dive Rite 9
Charging & Maintaining the Battery
T e best way to keep your batteries in good s ape so t at t ey perform well
on every dive is to follow t e battery maintenance procedures below. Before
using your lig t, make sure t at t e batteries are fully c arged.
Charging the Canister Battery
1. Open t e latc es on t e sides of t e canister and remove t e canister
lid.
2. Plug t e t ree (3) red connectors on t e Smart C arger into t e t ree
(3) red (+) battery receptacles on t e battery pack. It does not matter
w ic plug connects to w ic socket.
3. Plug t e black connector on t e Smart C arger into t e center black (-)
battery receptacle on t e battery back.
4. Plug t e Smart C arger into a wall outlet.
5. C arging will not begin if t e Smart C arger detects a missing battery or
reversed connections.
6. Allow t e battery to fully c arge.
It can take up to eig t ours for t e battery to c arge. T e red LED on
t e c arger indicates t at t e battery is c arging. A green LED indicates
w en t e battery is fully c arged.
7. Disconnect t e battery once it is fully c arged and unplug t e Smart
C arger from t e wall outlet.
www.diverite.com
July 2017 © Lamartek, Inc. dba Dive Rite 10
Charging the Handheld Batteries
1. Unscrew and remove t e battery tube from t e lig t ead.
2. Remove t e battery carrier from t e battery tube.
3. Remove t e individual 18650 batteries from t e battery carrier.
4. Insert t e batteries into t e c arger. (See included c arger manual for
specific details relating to t e c arger.)
5. Plug t e c arger into a wall outlet.
6. Allow t e batteries to fully c arge.
It can take up to 12 ours for t e batteries to c arge from a full
disc arge. T e LEDs on t e c arger will blink to indicate t at t e
battery is c arging. T e battery is fully c arged w en all of t e LEDs are
lit solidly.
Maintaining the Batteries
• Store t e batteries at room temperature and away from moisture.
• Ideally, store batteries in a 30-50% c arge condition to maximize life.
• T e canister battery is O-ring sealed in t e canister to prevent any
moisture from contacting t e cells and s ould not be removed. T e
battery does not ave to be removed w en storing t e lig t.
• Before every use, c arge t e battery completely.
• Do not plug t e lig t ead into t e battery w en not in use. T e
canister lid can be turned 180 degrees and reinstalled for transport and
storage. T e battery is not connected to t e lig t in t is position to
prevent accidental activation.
Indice
