5TECHNICAL DATAAs well as the operating manual and the binding regulations for accident prevention applicable in the country of usage and at the place where it is deployed, recognised rules for safety and expert working, and environmental protection, are also to be followed.
SAVETY INSTRUCTIONS
• The machine is to be inspected before usage for its perfect condition and operational safety. If it is not in perfect condition, it must not be used.• In particular, have any errors that may affect safety rectified immediately.• Operating the machine in buildings at risk of explosion is prohibited.• Sweeping up of flammable, toxic or explosive materials and combustible gases or undiluted acids and solvents, burning or smouldering objects is prohibited.• The device is not suitable for accepting fluids, ropes, twines, wires or similar items.• Only use the machine with the dirt-hopper inserted to prevent injuries due to parts being projected.• Do not make any alterations or additions to the machine without the approval of the manufacturer.• Persons (including children) who, due to theirphysical, sensory or mental capacities or their inexperience or lack of knowledge, are not capable of using the machine safely must not use this machine without the supervision or instruction of a responsible person. Children must be supervised to ensure that they do not play with the machine.• Caution: Loose items of clothing may be drawn into rotating parts and cause serious or fatal injuries.• Transporting loads with the sweeper is not permitted.• Observe the maximum climbing ability specified in the technical data and maximum possible slope inclination for operating across slopes. The equipment may tip, particularly on slopes. Adapt your operating manner and speed to the conditions.• The machine is not permitted for use on roads.• Suitable, non-slip footwear is to be worn to avoid accidents.Technical Data Model balimat 2300 Length 923 mm / 37 in Width 650 mm / 25 in Height 557 mm / 22 in Weight 55 kg / 121 lb Sweeping Path Width 620 mm / 24 in Main Brush Width 400 mm / 16 in Side Brush Diameter 300 mm / 12 in Hopper Capacity 37 L / 9.8 Gal Battery Capacity 12 V, 50 Ah Total Power Consumption 12 VDC, 230 W, 12.6 A Battery Charger 100-240VAC 8A Productivity Rate (Net) 1290 m²/hr / 13850 ft²/hr Slope Maximum 2% Machine Vibration at Hand-arm * <2.5m/s2 Machine Vibration Uncertainty K * 0.8 m/s2 Sound Pressure Level LpA * 62 dBA Sound Uncertainty KpA * 3 dBA Sound Power Level LWA + Uncertainly KWA * 81 dB(A) Protection Grade IPX3 Operation Temperature min. -15°C, max. 40°C * Values determined as per EN 60335-2-72 SAVETY
Switching Driving
Switching on
SAFETY INSTRUCTIONS ON BATTERIES • The operating instructions of the battery manufacturer for their product and the specifications of the legislator on handling batteries are to be followed.• Charge flat batteries directly after usage and only keep in well-ventilated rooms.• Keep away from naked flames and electrical sparks in the charging area, as a highly-explosive gas mixture can be produced when charging batteries.• Always keep batteries clean and dry to avoid leakage currents. Never short circuit the battery terminals.• To avoid damage to health, smoking, eating and drinking in the area of the battery charging station is to be avoided.• The battery must only be charged with the front panel open and secured by the cover holder.• Ensure safe and environmentally-friendly disposal of operating and auxiliary materials, as well as replacement parts, particularly batteries!SAFETY INSTRUCTIONS FOR CARE AND MAINTENANCE • Before cleaning and maintaining the equipment,replacing parts or changing to a different function, the equipment is to be switched off.• Spare parts must correspond to the requirements laid down by the manufacturer. This is always guaranteed for original spare parts.• Accessories and spare parts must only be installed by an authorised customer service department.• For work on the electrical system, the battery is to be disconnected.• The equipment must not be cleanedwith a hosepipe or high-pressure water jet (risk of short-circuits or other damage).• Repairs must only be made by the permitted customer service centres or by experts in this field familiar with all the relevant safety regulations.• Follow the safety review according to the locally-applicable regulations for mobile industrial equipment.• Always wear suitable gloves when working on the equipment.SAFETY INSTRUCTIONS FOR CARE AND MAINTENANCE SAFETY INSTRUCTIONS FOR OPERATION English EN
