dji Goggles Manuale utente
DJI Goggles
User Guide
2017.01
Product Profile
Introduction
DJI Goggles (abbreviated as “Goggles”) is equipped with high-performance
displays and an ultra-low latency video downlink for use with DJI aircraft, giving you
a real-time aerial FPV (First Person View) experience. Goggles can also be used to
play HD videos, bringing you an immersive high-definition viewing experience.
Their intuitively functional design makes them easy to operate using only the right
hand. Goggles support head tracking, allowing aircraft and/or gimbal to be
controlled using head movements. Used with Intelligent Flight Modes, this
introduces a new style of flying.
At a Glance
1. Strap
2. Charging Status
Indicator
3. Touch Panel
4. Power Button
5. Battery Level
Indicators
6. Strap Buckle
7. Heat Vent
8. Micro SD
Card Slot
9. Audio Port
10. HDMI Port
11. Speaker
12. Strap Knob
13. Charging/Upgrade Port
(Micro USB)
14. Back Button
15. Focus Button
16. Link Button
17. Linking Status Indicator
18. IPD (Interpupillary Distance)
Knob
Installation and Wearing
1. Insert the Strap Buckle into the slot above the lenses until you hear a click. Check
that it has been securely fastened.
2. Align the lenses over your eyes and pull the strap down. Adjust the Strap Knob
fit the Goggles snugly and comfortably.
3. Turn the IPD Knob to adjust the distance between the lenses until images are
aligned.
Goggles can be worn over glasses.
When putting the Goggles on, flip the lens portion to see outside the
goggles. Flip it back down for immersion.
Usage
Controls and Operations
[1] Power Button
Press the Power Button once, the press again and hold for 2 seconds to turn
the Goggles on/off. Battery Level Indicators will display the current battery level.
[2] Battery Level Indicators
When the battery is off, press the Power Button once to light up Battery Level
Indicators to display the current battery level.
The Battery Level Indicators will also show the current battery level during
charging and discharging. The indicators are defined below.
LED on LED flashing LED off
[3] Touch Panel
Use the touch panel with your right hand to control on-screen operations.
Action
Description
Swipe forward/backward
with one finger
Browse the menu and scroll right/left
Swipe upward/downward
with one finger
Browse the menu and scroll up/down
In the Main view, swipe upward to hide warnings
Swipe backward with two
fingers
Lock the touch panel. It will become non-functional
Swipe forward with two
fingers
Unlock the touch panel
Swipe downward with two
fingers
Enter the shortcut menu
Swipe upward with two
fingers
Exit the shortcut menu
Tap with one finger
Confirm
[4] Charging Status Indicator
Indicates the current charging status, the LED be solid red, yellow, green to
reflect low, medium and high power levels respectively.
[5] Back Button
Press to return to the previous menu.
[6] Focus Button
Press to show the focus cursor on the display screen, and move your head to
define the focus point. Tap the touch panel then swipe forward/backward with
one finger to zoom in or zoom out.
Only supported on the Mavic Pro, Phantom 4 Pro/Pro+ and Inspire 2.
[7] Linking Status Indicator
Indicates the linking status of the Goggles and the Mavic Pro. The indicator
will be solid red while linking, and it will go solid green when linked.
Connection
Goggles supports a wide range of DJI aircraft and different uses. Follow the steps
below to connect.
Mavic Pro
Goggles connect wirelessly to the Mavic Pro using OcuSync.
This connection is suitable for both single and dual operator aircraft control. In this
setup, the pilot using the remote controller can focus on flight, while the Goggles
operator can view the environment in real-time FPV for more intuitive control. By
moving their head, the Goggles wearer can control aircraft orientation or gimbal
movement.
If the Remote Controller and Goggles are operated by the same user,
a spotter able to instruction and warnings is required to ensure safe
flying.
In Motion-controlled-controlled Flight mode, aircraft yaw can be
controlled by both the Goggles and the Remote Controller. In Motion-
controlled-controlled Gimbal mode, only the gimbal will move with the
Goggles.
When linked to the Mavic Pro, the remote controller can be used to
control the Goggles. 5D Button = Touch Panel, C1 Button = Focus
Button, C2 Button = Back Button. These buttons will no longer control
the aircraft. Fly with caution.
Linking Method
1. Ensure both the aircraft and the remote controller are powered on and linked.
2. Put on Goggles and power on.
3. Use the touch panel to enter Tools > Settings > Pairing.
4. Choose “Normal” and confirm. The Goggles’ linking status indicator will go
solid red to wait for linking.
5. Press the Linking Button on the Mavic Pro. Once linked, the Goggles’ linking
status indicator will turn solid green.
Toggle the control mode switch of the Remote Controller to RC mode
before linking.
Other DJI Aircraft
Goggles also supports other DJI aircraft. Connect Goggles to the either the Micro
USB port or the HDMI port of the Remote Controller.
Main Screen
The main screen of Goggles and functions are described as follows:
Altri manuali per Goggles
2
Indice
Altri manuali dji Accessori
dji
dji NAZAH Manuale utente
dji
dji Goggles Manuale utente
dji
dji GOGGLES INTEGRA MOTION COMBO Manuale utente
dji
dji INSPIRE 2 Manuale utente
dji
dji GOGGLES 2 MOTION COMBO Manuale utente
dji
dji D-RTK Manuale utente
dji
dji FPV Goggles V2 Manuale utente
dji
dji Goggles RE Manuale utente
dji
dji FPV GOGGLES Manuale utente
