Dji Phantom 2 Vision + Manuale utente

Manual DJI Phantom 2 Vision Dronexpert Gimbal

V2

1. Remove battery from the phantom.

2. Place the Phantom upside down.

3. Pull the jackplug out of the camera

4. Lift the frame carefully from rubber holders. Pay attention to the wire

connected to the camera.

5. Disconnect the camera connector

6. Remove the “X-frame”for the Phantom body

7. You have now removed camera and frame

8. Remove white rubber cover and remove the screw

9. Remove the vision camera from the frame

10. Remove the plastic inlay

11. Return the screw with the inlay back in the frame so you don’t lose it.

12. Place the outside rubber cover back on the Vision camera.

Overview photo

13. Now take the gimbal and included parts out of the case

14. Put rubber tubes in the camera (where screws are located). Press the

tubes all the way down to the end.

15. Place the camera (jack) connector as show on the images

16. Place the screws in the rubber tubes as shown on the image

17. Now put the jack connector into the vision camera.

(make sure you press it to the end! If not pressed to the end the gimbal/camera will not work properly.)

IMPORTANT: Make sure the sensor plate is mounted horizontal, also make

sure the flat cable is free of moving space

Make sure cable is flat to camera, so that the camera has enough moving

space. If cable is blocking the movement space the camera will

'jittery' or 'shake/jump' when recording.

18. Paste the signalselector on the belly of the Phantom as shown on the

image and connect it. Make sure you keep enough space for your

Phantom battery.

19. Move the compass to a lower position (a few mm is enough)

Make sure the compass is not on the same line of the engine of the gimbal. If it is, then place the

compass lower than the motor so that it has free space to 'look'. Also make sure you calibrate the

compass before flying.

Altri manuali per Phantom 2 Vision +

17

Altri manuali dji Accessori per fotocamere

Manuali Accessori per fotocamere popolari di altre marche

Viltrox

Viltrox EF-NEX Istruzioni per l'installazione

Calumet

Calumet 7100 Series CK7114 Manuale utente

Ropox

Ropox 4Single Series Manuale utente

Cambo

Cambo Wide DS Digital Series Istruzioni operative

Samsung

Samsung SHG-120 Manuale utente

Ryobi

Ryobi BPL-1820 Manuale operativo

Aegis

Aegis ABL-36020P Manuale utente

Pentax

Pentax Data Back Fc Manuale utente

Fantasea

Fantasea EyeGrabber F Series Manuale utente

Honeywell

Honeywell HDZ20HD Manuale utente

EGO

EGO BA1400T Manuale utente

Sima

Sima SRW-62 Manuale utente

Shape

Shape A7SSMKIT Manuale utente

Slide Kamera

Slide Kamera HST-2 Manuale utente

Power works

Power works 2902613 Manuale utente

SES

SES SE-2047-2 Manuale utente

Olympus

Olympus PT-EP05L Manuale utente

Starlite

Starlite OctoDome nxt Manuale utente