Dji S800 Manuale utente

Spreading Wings S800

User Manual

V 1.6

2012.10.25 修改

www.dji-innovations.com

Disclaimer

Read this disclaimer carefully before using Spreading Wings S800. By using this product, you hereby

agree to this disclaimer and signify that you have read them fully. Spreading Wings S800 is an excellent

multi-rotor. With a good autopilot, it will offer tremendous flight features. Despite the controller of DJI

autopilot operate in the safest manner when the main power battery is connected, we strongly

recommend customers to remove all frame arms, and keep children away during system calibration and

parameter setup.

As DJI Innovations has no control over use, setup, final assembly, modification (including use of

non-specified DJI parts i.e. motors, ESCs, propellers, etc.) or misuse, no liability shall be assumed nor

accepted for any resulting damage or injury. By the act of use, setup or assembly, the user accepts all

resulting liability.

DJI Innovations assumes no liability for damage(s) or injuries incurred directly or indirectly from this

product usage.

DJI Spreading Wings is registered trademark of DJI Innovations. Names of product, brand, etc.,

appearing in this manual are trademarks or registered trademarks of their respective owner companies.

product or manual shall be reproduced in any form without the prior written consent or authorization of DJI

Innovations. No patent liability is assumed with respect to the use of the product or information contained

herein.

S800 Profile

DJI Spreading Wings S800 is a multi-rotor designed for AP. It simplifies users’ installation and enables

quick disassembling. Frame arm integrates with ESC and motor. With DJI WKM autopilot system, it can

achieve hovering, cruising and other flight elements. S800 can be applied for aerial photography and

other aero-modeling activities.

350mm(Lenghth)

320mm(Height)

415mm(Width)

145mm

(Top Width)

240mm(Diameter)

500mm(Length)

Contents

Disclaimer.......................................................................................................................2

S800 Profile....................................................................................................................3

Contents.........................................................................................................................4

Product Usage Cautions.................................................................................................5

In Box.............................................................................................................................6

Tools Needed .................................................................................................................6

Center Frame Wiring......................................................................................................7

Mount Center Frame ......................................................................................................8

Mount Frame Arms.........................................................................................................9

Mount Bi-pod................................................................................................................11

Assembly......................................................................................................................13

ESC Sound...................................................................................................................14

Specifications ...............................................................................................................14

Appendix ......................................................................................................................16

Mount Battery Bracket...........................................................................................16

Trouble Shooting...................................................................................................17

Spare Parts Listing................................................................................................18

Product Usage Cautions

When flying, the fast rotating propellers of S800 may cause serious damage(s) and injuries.

Therefore, please fly with a high safety in mind at all time.

Mount Attention

Mount GPS with a bracket, to avoid interference from the power board of center frame.

For IMU position, make sure the arrow direction marking is pointing to the aircraft nose.

The receiver is recommended strongly to be installed under the bottom board of center

frame, and the head of antenna is downward without any obstacle. The aircraft will be out of

control, since the wireless signal may be lost by the obstacle.

Mount the arms correctly.

Center frame Arm

For removing screws in the bottom board, please proceed with cautious, avoiding

damages. Do not remove any other screws fixed with glue.

Notice matching the indications is very important, please pay attention to them.

Flight Attention

With DJI WKM autopilot system, make sure the output signal of WKM F1~F2 and M1~M6 are

all normal, to avoid serious damage(s) and injuries.

Keep flying multi-rotor a distance from people, building, high-voltage lines, etc.

Make sure to use 6S LiPo power battery.

Do not get close to or touch the working motors and propellers, which will cause serious

injury.

Do not over load the multi-rotor.

Make sure the propellers and the motors are installed correctly and firmly before flying.

Make sure all parts of S800 are in good condition before each flight. Do not fly with wore or

broken parts.

Strongly recommend you use DJI parts as much as possible.

Others

If you have any problem you cannot solve, please contact agents or DJI customer service.

In Box

Center Frame 800CF×1

Frame Arm 800FA×6

H Frame 800HF ×1

T Frame 800TF×2,Aluminum Ring 800AR×2

Base Pipe 800BP×2

Bi-pod Drawbar 800BD×4

Silicone Rubber Damper 800SRD×4

Nonslip Damper 800ND×4

3-PIN Servo Cable 800SC ×1

Screw Package 800SP ×1

Hexagonal screws: M3×8、M2.5×5

Hexagonal socket head cap screws: HC-M3.0×22 、

HC-M2.5×5、HC-M2.5×8、HC-M3×8、T2×9

Adhesive Velcro 800AV ×1, Battery Band 800BB ×2

Tools Needed

2.0mm Hex Wrench, 2.5mm Hex Wrench

For mounting screws.

Screw Glue

For fastening screws.

Nylon Cable Tie

For binding devices and wires.

Scissors

Diagonal Cutting Pliers

Foam Double Sided Adhesive Tape

For fixing receiver, controller and other modules.

Center Frame Wiring

Top board is power distribution board, and the bottom board is for loading autopilot system components.

Top Board

Bottom Board

Buckle

Slot

BATT

GIMBAL

IMU Front

Aircraft Nose

To Battery

To PMU

XT60 Male

XT60 Female

To Gimbal

Motor clock-wise

ESC signal outlet

To main controller

Mark

IMU mount position

Circuit line

Parallel

Motor number

Mark

Motor count clock-wise

Mark

Top Board

Notices:

For IMU position, make sure the arrow direction marking is pointing to the aircraft nose.

Connect the motor 3-pin connector (M1~M6) from WKM M.C. to ESC signal socket (M1~M6) on

center frame markings accordingly.

(WKM M.C. M1 ESC signal socket M1, …… , WKM M.C. M6 ESC signal socket M6)

Tips:

Main battery power leads, gimbal and PMU leads are on the bottom surface of the top board.

Markings and stand for the propeller rotation direction. means clock-wise, and means

counter clock-wise.

If you need other lead connector, please cut the original connector and solder on the new connector.

(But not Recommend)

Mount Center Frame

Remove Screws

Fix Screws

Step1: Mount IMU module into IMU position in the center frame. Ensure IMU casing is out of touch the

top board edge, as vibration can cause IMU mal-function.

Step2: Please mount DJI Autopilot System parts onto the bottom board (not including GPS modules).

Please remove all the screws from the bottom board first if necessary.

Step3: ConnectAutopilot System and receiver. Please refer to DJI WKM User Manual for details.

Step4: Please mount the screws to bottom board, and use adequate screw glue.

Step5: Mount the GPS on the top board with a bracket.

Step6: Configure Autopilot System. Please refer to DJI WKM User Manual.

Notices:

Make sure to mount the IMU module at the IMU position first.

Mount the GPS with a bracket, to avoid interference from center frame power board.

Ensure the USB port of the M.C. outwards for easy access.

Please wire neatly. Make sure wires will not be cut by the edge of frames.

Tips:

Install screws with appropriate strength to prevent damage threads.

Mount Frame Arms

Step 1

Step 2

Motor rotation direction

Clock-wise

Counter clock-wise

Motor

ESC

LED

Red

Green

Copper contacts

Cover

Screw

Propeller

(1)

800CF　×1

800FA　×6

Step 3

Step 4

Step 5

(2)

800CF　×1

800FA　×6

800CF　×1

800FA　×6

35o

Horizontal

Vertical

Horizontal

Step1: Check arms.

(1) Make sure copper contacts are in good condition without bend or severe wear.

(2) Make sure propellers are without crack, and screws in propeller cover tight.

(3) Make sure motors are mounted firmly, and rotate freely.

(4) Distinguish LED indicator on the ESC bottom. With a red point in is red LED, others are

green LED. We recommend you mount arms with red LED to M1 and M2.

(5) Distinguish marks and on the arms.

Arm Center frame

Step2: Insert frame arm into center frame vertically.

Step3: Slowly rotate the frame arm upward until positioned completely.

Step4: Press down the buckle to lock the arm. Make sure the arm does not move.

Step5: Make sure the buckle is pressed down correctly, about 35o under normal circumstances.

Notices:

Please add some lubricant at the position (1) if it is hard to press down the buckle.

Slowly rotate the frame arm to prevent from breaking the copper contacts.

Please refer to (2) to ensure the arm is perfectly positioned.

Make sure use appropriate strength to press down the buckle correctly.

Do not hot plug arms.

If the motor mount loosens, please tighten it by following the procedures in trouble shooting of

Appendix.

Tips:

LED is on after motor start.

Examination

Arms①②are aircraft nose direction, arms④⑤ are aircraft tail. See from top, motors on arms①③⑤

rotate counter clockwise; motors on arms②④⑥ rotate clockwise.

Aircraft Nose

①

②

③

④

⑤

⑥

Altri manuali per S800

Indice

Altri manuali dji Drone

dji

dji Agras T25 Manuale utente

dji

dji Phantom 2 Vision + Manuale utente

dji

dji MATRICE 350 RTK Manuale utente

dji

dji MAVI 3 CLASSIC Manuale utente

dji

dji Mavic 2 Enterprise Manuale utente

dji

dji AGRAS T10 Manuale utente

dji

dji Mini 2 Manuale utente

dji

dji T20 Manuale utente

dji

dji crystalsky CS785 Manuale utente

dji

dji Phantom 4 Advanced + Manuale utente

dji

dji Mini 2 Dimensioni

dji

dji Agras MG-1P Manuale utente

dji

dji E1200 Standart Manuale utente

dji

dji PHANTOM 4 Manuale utente

dji

dji PHANTOM 4 Series Manuale di istruzioni

dji

dji MATRICE 30 T Dock Version Manuale utente

dji

dji Phantom 4 Pro+ V2.0 Manuale utente

dji

dji Matrice 600 Pro Manuale di istruzioni

dji

dji Mavic 2 Enterprise Manuale utente

dji

dji Phantom 4 RTK Manuale di istruzioni

dji

dji Agras MG-1P Manuale utente

dji

dji RM33022 Manuale utente

dji

dji MAVIC MINI Manuale utente

dji

dji SPARK Manuale utente

Manuali Drone popolari di altre marche

Ryze

Ryze Tello Manuale utente

PowerVision

PowerVision PowerRay Manuale utente

Force1

Force1 rogue F72 Manuale utente

Zerotech

Zerotech DOBBY Manuale utente

Protocol

Protocol VIDEODRONE AP Manuale utente

MAKE

MAKE Terry Kilby Manuale utente

SYMA

SYMA X440 Manuale utente

RUKO

RUKO F11 Manuale utente

SYMA

SYMA X5UW(720P) Manuale utente

Dynali

Dynali 25 H Guida

Atlas

Atlas AtlasPRO Manuale utente

Twodots

Twodots TVVIN BOARD Manuale utente

GDU

GDU SAGA Manuale utente

Ares

Ares ETHOS QX 130 Manuale utente

Walkera

Walkera ZHUN Manuale utente

Potensic

Potensic D58 Manuale utente

Arris

Arris M900 Manuale utente

Storm

Storm DJI Flamewheel F450 RTF Manuale utente

dji S800 Manuale utente

Manuali Drone popolari di altre marche