1200Lb.MagneticGateLockKit DoorKing Part Numbers
1216-080
1216-081
It is essential that the surfaces of the armature and the magnetic lock seat perfectly to one another when the gate is in the closed
position. This allows the lock to achieve its maximum holding strength. It is critical the armature is securely fastened to the gate
frame, but able to move with the 1/8 to 1/4 inch rubber spacer(s) to correctly align with the magnetic lock.
Important: Weld the
brackets to fence post and
gate frame BEFORE
assembling the armature
and maglock.
Note: Additional hardware is
supplied for a side mount option
and different armature spacing
configurations.
DoorKing Optional Hardware Note: “L” and “Z” bracket kit
(P/N BO3-S12) is available for different installation configurations.
Sexnut Note: Using the sexnut,
the armature can be mounted
directly to the gate frame
without using the supplied
armature mounting bracket.
Secure sexnut through the gate
frame and into armature bolt.
120 Glasgow Avenue
Inglewood, California 90301 U.S.A.
Front Mount Typical
Maglock
Front Mount Typical
1” Welded Bracket Armature Bolt
1 1/2” Armature Bolt
Wiring
Access Plate
P/N B02-GL12
(Supplied)
P/N B01-GL12
(Supplied)
Plug unused
1/2” conduit
holes.
Maglock
Mounting
Bracket
Weld to fence post.
(Typical connection)
Side Mount Option
Side Mount Option
Installation
Armature
Bolt
Options
Maglock
TypicalFrontMountWelded
Moving Gate Frame
Armature
Gate Frame
Armature
Sexnut
Stationary Fence Post
Welded Mounting Brackets
Armature
Thinner
Option
Typical
Thicker
Option
Insert
Roll Pin
Insert
Roll Pin
Sexnut Connection
Option
(Not used for welded
bracket option.)
Armature
Mounting
Bracket
Weld to gate frame.
(Typical connection)
