DNA Professional CM USB KIT Manuale utente
CM USB KIT
USER MANUAL
INSTRUKCJA OBSŁUGI
ENGLISH
PRODUCT PARAMETERS
TECHNICAL DATA
Type
Condenser
Polar pattern
Omni-directional
Frequency response
20Hz-20kHz
Sensitivity
-34dB (±2dB)
Equivalent noise level
16dB
S/N Ratio
78dB
USB interface
USB 2.0
Power supply
USB DC5V
Material
Metal, plastic
Compatibility
Windows XP/Vista/7/8/10/Mac
FREQUENCY RESPONSE CURVE
POLAR RESPONSE
FEATURES
SETUP
Plug one of the USB cable into the power socker in the microphone, and con-
nect the other end to computer. The power indicator will turn blue if it is work-
ing properly.
POWER REQUIREMENTS
1. The microphone is powered by your device’s USB port, meaning that
in most instances you can just plug the microphone in and get started
right away. For non-standard USB ports, a powered USB hub may be
required.
2. It is a “Plug and Play” USB device, compatible with both Windows and
Mac computers. Placement of the microphone and relative to the vo-
calist may be varied on several factors including room acoustics, the
vocal performance, and whether the vocalist has a high or deep voice.
GENERAL OPERATION CONTENT
Positioning the microphone for vocals
MICROPHONE PLACEMENT
An ideal starting point for the reference is to place microphone directly in front
of the lead singer in 15cm (6”) distance. Moving the vocalist a little closer will
make the vocal sound more intimate and full, while moving the vocalist back
will give the vocal a little more ‘air’ or room sound, and will reduce the prox-
imity effect (increased bass or low frequency response when the sound source
is very close).
Experimentation should be made with the angle from which the microphone
is addressed, as different results can be achieved when the vocalist is ‘off-axis’
to the microphone (and the gold dot).
SETTING YOUR INPUT LEVEL
The microphone has been set to an ideal internal gain setting, without the
need for physical level adjustments on the microphone body. Any necessary
level adjustments to set the ideal recording level can be made from within your
recording program, or via your computer’s system preferences.
To adjust your input level from within your recording software, refer to the
manual provide by the software developer.
To manually adjust your input level via your computer’s system preferences,
use the following instructions relevant to your device platform/operating sys-
tem.
Adjusting the input level on a MAC OS computer:
1. Click on the Apple symbol at
the top left of your screen and
select System Preferences.
2. Click on ‘Sound’ to open the sound options.
3. Open the ‘Input tab’.
4. From here select the ‘Microphone’of ‘Type USB’ from the list of de-
vices, and adjust the input level using the slider.
Adjusting the input level on a Windows computer
1. Open the ‘Start’ menu and click on ‘Control Panel’
2. Open the ‘Sound’ preferences from within the Control Panel folder
3. Open the ‘Recording’ tab and double click on ‘Microphone’ from the
list of devices.
4. Adjust the input level using the slider.
NOTE
1. Do not cover the microphone grille with your hand.
2. Regular maintenance is recommended to avoid electricity erratic and
acoustic problems.
Thank you for purchasing our product!
We love to hear back from our valued customers!
WARNING! THE DEVICE MUST NOT BE DISPOSED OF WITH HOUSEHOLD
WASTE.
This symbol indicates that this product must not be disposed of with
household waste, according to the EU and your national law. In order to
prevent potential damage to the environment or health, the used prod-
uct must be recycled. In accordance with current legislation, unusable electri-
cal and electronic devices must be collected separately at the designated facil-
ities for recycling, acting on the basis of applicable environmental standards.
Information about used electrical and electronic equipment
The main goal of European and national law regulations is to reduce the
amount of waste produced from used electrical and electronic equipment, to
ensure an appropriate level of collection, recovery and recycling of used equip-
ment, and to increase public awareness of its harmfulness to the environment,
at each stage of use of electrical and electronic equipment. Therefore, it should
be pointed out that households play a key role in contributing to reuse and
recovery, including recycling of used equipment. The user of electrical and elec-
tronic equipment – intended for households – is obliged to return it to author-
ized collector after its use. However, it should be remembered that products
classified as electrical or electronic equipment should be disposed of at author-
ized collection points.
POLSKI
PARAMETRY PRODUKTU
DANE TECHNICZNE
Typ
Pojemnościowy
Charakterystyka kierunkowa
Wszechkierunkowa
Pasmo przenoszenia
20Hz-20kHz
Czułość
-34dB (±2dB)
Równoważny poziom szumów
16dB
S/N Ratio
78dB
Interfejs USB
USB 2.0
Zasilanie
USB DC5V
Materiał
Metal, tworzywo
Kompatybilność
Windows XP/Vista/7/8/10/Mac
KRZYWA PASMA PRZENOSZENIA
WYKRES KIERUNKOWOŚCI
Indice
Lingue:
