DNF Controls ST100 Manuale utente
ST100
VTR CONTROLLER
For
Version 6.x and 7.x Units
USER MANUAL
Rev 3.13
19770 Bahama St.
Northridge, CA. 91324
V: 818.898.3380
F: 818.898.3360
sa es@dnfcontro s.com
www.dnfcontro s.com
1
1
ST100 VTR Controller
Ta le of Contents
1. REVISION
HISTORY 2
GETTING STARTED . . . 3
2. DESCRIPTION 3
a. FEATURES 3
b. TIME CODE DISPLAY 3
c. STANDARD FUNCTIONS 3
d. REAL-TIME STATUS INDICATORS: ACTIVE ON 3
3. INSTALLATION 4
4. OPERATION 5
a. RECORD MODE 5
b. RECORD SELECTOR SWITCHES 5
c. TIME CODE DISPLAY 5
5. ST100-SXD
FUNCTIONS 6
REFERENCE . . . 7
6. SPECIFICATIONS 7
FRONT PANEL 7
REAR PANEL CONNECTORS 7
RS4 SERIAL CONNECTOR 8
GPI CONNECTOR – Version 6.x Software 8
GPI CONNECTOR – Version 7.x Software 9
POWER SUPPLY CONNECTOR 9
7. TABLE
TOP
REAR
AND
TOP
VIEW 10
8. DNF
CONTROLS
LIMITED
WARRANTY 12
2
2
ST100 VTR Controller
1. REVISION HISTORY
061703 Rev. 3.0 Company header information revised.
010504 Rev. 3.1 Added DNF Controls Limited Warranty.
10 506 Rev. 3.11 Added "time type" select function.
01 610 Rev 3.1 Added XDCAM functions (ST100-SXD)
07061 Rev 3.13 Added Button Crash Record
3
3
ST100 VTR Controller
Getting Started . . .
2. DESCRIPTION
The ST100 UNIVERSAL Controller provides low cost control over a wide range of RS4 VTR
and DDR formats and brands in your facility.
Simple and easy to use.
No complicated menus to search through.
All the functions you need at the press of a button. Eliminates the need for multiple remote
controllers and the associated clutter of several pieces of control hardware.
a. FEATURES
Timecode/tape time display; Jog/Shuttle Wheel.
1 -function keypad provides the functions you need at the press of a button.
Small footprint desktop unit, 8 ½” x 5 ½”.
Can be easily customized for your specific needs. Customize the ST100 with the
transport control functions and status indicators you require for your specific
applications.
Can be used through your facility’s existing RS4 Control router, RS4 patch bay or
9-pin switch box.
. TIME CODE DISPLAY
Display Timecode or CTL Tape Timer per the mode selector switch on the front panel of
the VTR. The Time Mode can be selected manually by pressing the [SHIFT] + [JOG]
keys, each press will step to the next Time Mode: CTL Tape Time, Timecode, VITC.
c. STANDARD FUNCTIONS
RECORD
PLAY
STOP
REWIND
FAST FORWARD
JOG/SHUTTLE MODE SELECT
NOTE: JOG & SHUTTLE WHEEL - Active ONLY from STOP/STILL or
JOG/SHUTTLE modes.
d. REAL-TIME STATUS INDICATORS: ACTIVE ON
RECORD
PLAY
STOP/STILL
REWIND/REVERSE
FAST FORWARD/FORWARD
JOG MODE SELECTED
4
4
ST100 VTR Controller
3. INSTALLATION
a. Plug one end of a 9-conductor, RS4 serial cable into the 9-pin connector on the rear of
the ST100. Plug the other end of the cable into the 9-pin remote connector on the VTR.
b. Plug the 9-pin D-female connector on the POWER SUPPLY into the male 9-pin
connector on the rear of the ST100.
Plug the AC connector into a wall outlet, 90 VAC - 65 VAC, 50-60 Hz.
c. Select REMOTE operation on the VTR's front panel.
d. Set the RECORD SELECTOR SWITCHES, located on the rear panel of the ST100, to
the desired record mode per the “RECORD SELECTOR CHART.”
Installation is completed.
NOTE: For AMPEX 1-inch and D VTRs, set VTR ID to 0001.
Connection Diagram
NOTE: Rack mount version shown with Optional User Supplied external GPI switch inputs and tally
outputs. Tabletop version uses the same connections.
5
5
ST100 VTR Controller
4. OPERATION
Select the desired transport function by pressing the appropriate switch on the front of the ST100.
The Real-Time Status Indicators will light to indicate the VTRs current tape transport mode.
For example: Pressing [PLAY] will put the VTR into the PLAY mode.
The PLAY Status Indicator will light when the VTR is in PLAY mode.
Loss of serial communication with the VTR is indicated by ALL status LEDs turning ON.
Selecting LOCAL control on the VTR's front panel will turn OFF all status LEDs.
a. RECORD MODE
Five(5) record modes are available:
Crash Record (Full Record), Button Crash Record, Assemble Record, Insert Record
and Record Lockout.
For Crash Record, Assemble Record and Insert Record, Press only the [RECORD]
switch to activate the selected Record mode.
The Record Status Indicator will light when the VTR is in RECORD mode.
For Button Crash Record, hold down [SHIFT] and press [RECORD] to go activate
Crash Record mode.
NOTE: The VTR will not go into Record mode if “Record Inhibit” is enabled on the
VTR or tape cassette.
. RECORD SELECTOR SWITCHES
Mode S1 S2 S3 S4 S5 S6
Record Lockout OFF OFF OFF OFF OFF OFF
Assemble Record ON OFF OFF OFF OFF OFF
Crash Record OFF ON OFF OFF OFF OFF
Button Crash Record OFF ON OFF OFF ON OFF
Insert Record ON VID AUD1 AUD AUD3 AUD4 Active On
NOTE: AUD3 & AUD4 should be ON ONLY for VTRs that support 4 channels of
audio, i.e.: D1-, D - and D3-type VTRs.
c. TIME CODE DISPLAY
Display Timecode or CTL Tape Timer per the mode selector switch on the front panel of
the VTR. The Time Mode can be selected manually by pressing the [SHIFT] + [JOG]
keys, each press will step to the next Time Mode: CTL Tape Time, Timecode, VITC.
6
6
ST100 VTR Controller
5. ST100-SXD FUNCTIONS
The ST100-SXD is designed to work specifically with the Sony XDCAM. The ST100-SXD
includes support for clip access commands.
a. GO TO FIRST CLIP
Press [SHIFT] + [PLAY] to go to the beginning of the first clip.
. GO TO LAST CLIP
Press [SHIFT] + [STOP] to go to the end of the last clip.
c. GO TO PREVIOUS CLIP
Press [SHIFT] + [REWIND] to go to the beginning of the previous clip.
d. GO TO NEXT CLIP
Press [SHIFT] + [FFWD] to go to the beginning of the next clip.
7
7
ST100 VTR Controller
Reference . . .
6. SPECIFICATIONS
FRONT PANEL
6 Status LEDs Record, Play, Stop, Rewind, FFwd, Jog
1 Power LED
3 Direction LEDs Indicates direction of Jog Shuttle
Switches Record, Play, Stop, Rewind, Fast Forward, Jog, Shift, Reset
DIP Switches RECORD MODE: Lockout, Crash, Insert, Assemble
Display -Line LCD, back-lit with adjustable contrast
Jog/Shuttle Wheel
Size 19” x 5” x 1-3/4” (Rack mount)
7” x 5” x 1-1/ ” (Tabletop)
Weight lbs.
REAR PANEL CONNECTORS
RS4 Serial Out 9-pin D-type connector, female (DB9-F)
Power: 5 volt D.C., 500 ma. 90- 65 VAC,
50/60 Hz converter supplied (Rack mount or tabletop)
GPI 15-pin D-type connector, female (DB15F)
Switch Input: SPST contact closure, momentary
Status Output: Open collector, sink 50mA.
8
8
ST100 VTR Controller
RS422 SERIAL CONNECTOR
9-Pin D-Type, Female (DB9-F)
Pin # 1 Frame Ground 6 Receive Common
Receive A 7 Receive B
3 Transmit B 8 Transmit A
4 Transmit Common 9 Frame Ground
5 Spare
SHUTTLE WHEEL SPEEDS
Note: ( ) represents Shuttle
speeds in reverse direction
GPI CONNECTOR – Version 6.x Software
15-Pin D-Type, Female (DB15-F)
Version 6.x Software (Rev. 4.x Hardware) ONLY
Pin # Function Note _
1 +5VDC Power for Status External Indicators
Switch #7, Shift Mode Select Active Low (+5 Pull Up)
3 Led #1 drive, Record Status Indicator Active Low, Open Collector Output
4 Led # drive, Play Status Indicator “ “ “
5 Led #3 drive, Stop Status Indicator “ “ “
6 Led #4 drive, Rewind Status Indicator “ “ “
7 Led #5 drive, Fast Forward Status Indicator “ “ “
8 Led #6 drive, Jog Mode Indicator “ “ “
9 Command Common
10 Switch #1, Record Command Active Low (+5 Pull Up)
11 Switch # , Play Command Active Low (+5 Pull Up)
1 Switch #3, Stop Command Active Low (+5 Pull Up)
13 Switch #4, Rewind Command Active Low (+5 Pull Up)
14 Switch #5, Fast Forward Command Active Low (+5 Pull Up)
15 Switch #6, Jog Mode Select Active Low (+5 Pull Up)
STILL
.50 X Play
.0 X Play
10 X Play
Max Speed
( -10 X Play )
( Max Speed )
(-.50 X Play)
( - .0 X Play)
Jog Wheel
Indice
Altri manuali DNF Controls Controllori
DNF Controls
DNF Controls 2044CL-EVS Manuale utente
DNF Controls
DNF Controls 2MCE-24P Manuale di installazione e funzionamento
DNF Controls
DNF Controls ST30 Manuale utente
DNF Controls
DNF Controls ST600-KIPRO Manuale utente
DNF Controls
DNF Controls RPC-HOR-PESA Manuale utente
DNF Controls
DNF Controls 4000CL-L Manuale utente
DNF Controls
DNF Controls TBC-2-DVC Manuale utente
DNF Controls
DNF Controls ST300-SSM Manuale utente
DNF Controls
DNF Controls 4000CL-O Manuale utente
DNF Controls
DNF Controls DMAT-MAV Manuale utente
