6. To inspect a banknote under upper, lower and oblique white
lighting or lower infrared lighting, press the button
successively to switch between lightings.
7. To detect anti-Stokes luminophore, bring the areas of a banknote
to the anti-Stokes sensor. If there is any luminophore present,
green indicators on the detector’s support light up.
8. To detect magnetic marks, press the banknote area with
magnetic marks to the magnetic sensor and move the banknote
to the left and right approximately for 1 cm two times per
second. If there are any magnetic marks present, red indicators
on the detector’s support light up and a sound signal goes off.
9. To select adjustment settings and different modes of the device,
press . Upon pressing this button, screens of adjustment of
brightness, contrast, color saturation (only when a video
magnifier is connected), automatic switch-off timing, magnetic
marks indication, anti-Stokes sensor switch turn on
successively. Magnetic marks indication screen allow to switch
on and off the sound of the magnetic sensor or
switch off the sensor completely . Anti-Stokes adjustment
screen allows switching the anti-Stokes sensor on or off .
Changes of settings are made with the buttons and
To exit the adjustment mode, press
10. If there’s no motion in the detection area, the device switches
off after a preset amount of time. To switch off the device
manually, press the according button.
DoCash mini Combo 9 www.docash.de
