Dometic DM2652 Istruzioni operative

Read these instructions carefully. These

instructions MUST stay with this product.

USA

SERVICE OFFICE

Dometic Corporation

2320 Industrial Parkway

Elkhart, IN 46516

CANADA

Dometic Corporation

46 Zatonski, Unit 3

Brantford, ON N3T 5L8

CANADA

SERVICE CENTER &

DEALERLOCATIONS

Please Visit:

www.eDometic.com

Form No. 3315716.000 02/14

(French 3315717.000)

LaGrange, IN 46761

RECORD THIS INFORMATION FOR FUTURE

REFERENCE:

Model Number

Serial Number

Date Purchased

Retailer / Qualied Installer

DM2652

RISER KIT

RM2820

REPLACEMENT

CONVERT DM2652 REFRIGERATOR

TO REPLACE RM2820

(TO FIT RM2820 CABINET OPENING)

SERVICE

INSTRUCTIONS

TABLE OF CONTENTS

INTRODUCTION....................................................................................................................................................................2

DOCUMENT SYMBOLS ........................................................................................................................................................2

IMPORTANT SAFETY INSTRUCTIONS................................................................................................................................3

A. Recognize Safety Information ...................................................................................................................................3

B. Understand Signal Words..........................................................................................................................................3

C. Supplemental Directives............................................................................................................................................3

D. General Safety Messages.........................................................................................................................................3

GENERAL INFORMATION.....................................................................................................................................................3

A. Scope Of Delivery......................................................................................................................................................3

B. Required Tools...........................................................................................................................................................3

C. Required Components...............................................................................................................................................3

PREPARE REFRIGERATOR .................................................................................................................................................4

A. Remove Old Refrigerator...........................................................................................................................................4

B. Replace Mounting Rails.............................................................................................................................................4

INSTALL REFRIGERATOR....................................................................................................................................................4

A. Place And Secure Refrigerator..................................................................................................................................4

CONNECT UTILITIES............................................................................................................................................................5

FINISH INSTALLATION..........................................................................................................................................................6

INTRODUCTION

This kit is designed and intended for use on DM2652 refrigerators (hereinafter referred to as “refrigerator,” or “product”).

It is designed to convert a DM2652 refrigerator to t an existing cabinet opening of an old RM2820 refrigerator.

This kit can be installed by one person. Use these instructions AND Installation Instructions (included with refrigerator) to

ensure correct installation of kit, and correct function of product.

Dometic Corporation reserves the right to modify appearances and specications without notice.

DOCUMENT SYMBOLS

Indicates additional information that is NOT related

to physical injury. Indicates step-by-step instructions.

The installation MUST comply with all ap-

plicable local and national codes, including

the latest edition of the following standards:

U.S.A.

●ANSI/NFPA70, National Electrical Code

(NEC)

●ANSI/NFPA1192,Recreational Vehicles

Code

● Title 24 CFR, Part 3280, Manufactured

HomeConstruction andSafetyStandard

●National Fuel Gas Code, ANSI Z223.1/

NFPA 54

CANADA

●CSAC22.1,Parts l&ll, CanadianElectri-

cal Code

●CSA Z240 RV Series, Recreational

Vehicles

●CSAZ240.4,Gas-Equipped Recreational

Vehicles and Mobile Housing

●CSA B149.1, Natural Gas and Propane

Installation Code

D. General Safety Messages

 Failure to obey the following warn-

ings could result in death or serious injury:

●This product MUST be [installed / serviced] by a

qualied service technician.

●Do NOT modify this product beyond the scope of

these service instructions. Modication (beyond

these service instructions) can be extremely

hazardous.

Thismanual hassafetyinformation andinstructionsto help

you eliminate or reduce the risk of accidents and injuries.

A. Recognize Safety Information

This is the safety alert symbol. It is used to

alertyou topotentialphysicalinjury hazards.

Obey all safety messages that follow this

symbol to avoid possible injury or death.

B. Understand Signal Words

A signal word will identify safety messages and

property damage messages, and will indicate the

degree or level of hazard seriousness.

 indicates a hazardous situation that,

if NOT avoided, could result in death or serious in-

jury.

 indicates a hazardous situation that,

if NOT avoided, could result in minor or moderate

injury.

 is used to address practices NOT

related to physical injury.

C. Supplemental Directives

Read and follow all safety information and

instructionsto avoidpossibleinjuryor death.

Readand understandthese instructionsbe-

fore[installing/ using/servicing /performing

maintenance on] this product.

Incorrect[installation /operation/ servicing/

maintaining] of this product can lead to seri-

ous injury. Follow all instructions.

IMPORTANT SAFETY INSTRUCTIONS

GENERAL INFORMATION

A. Scope Of Delivery

(2) Mounting Rail

(1) Base Cover

(1) Gas Line Extension with 45° 3/8″ Flare Nipple

B. Required Tools

●Electric Drill (optional)

●Phillips Screwdriver / Bit

●Adjustable Wrench

● 5/8″ Open End Wrench

● 11/16″ Open End Wrench

● 3/4″ Open End Wrench

Additional tools may be necessary to com-

plete refrigerator installation.

C. Required Components

● 3″ Screws

A. Remove Old Refrigerator

Remove old refrigerator from enclosure.

See Installation Instructions (included with

refrigerator) for appropriate procedure.

B. Replace Mounting Rails

1.  Do NOT allow cosmetic features

/ surfaces of product to contact oor or other

hard surface. Otherwise, abrasion or other dam-

age could occur.

Place new refrigerator face down to access

mounting rail (at bottom).

Use padding to protect refrigerator doors

from abrasion, and boards to space refrig-

erator handles above oor (if applicable).

2. Remove screws securing mounting rail to refrig-

erator. Save for reinstallation later. See (FIG. 1).

FIG. 1

Back

Mounting Rail

Short Screw

3. Discard old (short) mounting rail. See (FIG. 1).

4. Place new (tall) mounting rail against bottom of

refrigerator, and align its mounting holes to the

tapped holes in refrigerator. See (FIG. 2).

FIG. 2

Mounting Rail

Front

Long Screw

5. Reinstall screws to secure mounting rail to re-

frigerator. See (FIG. 1) & (FIG. 2).

Short screw near back of refrigerator, and

long screw near front.

6. Repeat steps (2) through (5) for other mounting

rail.

PREPARE REFRIGERATOR

INSTALL REFRIGERATOR

Make sure refrigerator enclosure is prepared correctly

before installing refrigerator.

SeeInstallation Instructions(included withrefrigera-

tor) for enclosure requirements.

Enclosure size should match requirements for the

RM2820 refrigerator.

A. Place And Secure Refrigerator

1. Verify electrical outlet (inside enclosure) will not

interfere with refrigerator installation.

If outlet location interferes, move / reroute

wiring to appropriate location in compli-

ance with all applicable codes.

2. Carefully place and secure refrigerator to enclo-

sure.

Verify there are no exposed openings / gaps

along top and sides where refrigerator frame

seals against enclosure.

See Installation Instructions (included with

refrigerator) for complete instructions.

Exceptions to normal instructions:

● Use 3″ long mounting screws (customer

supplied) through (tall) mounting rail. See

(FIG. 3) & (FIG. 4).

●Discard old (short) base cover (included

with refrigerator). Use new (tall) base

cover (provided with kit) instead. See

(FIG. 4).

FIG. 3

Mounting Rail

3″ Screw FIG. 4

Base Cover

3″ Screw

INSTALL REFRIGERATOR

CONNECT UTILITIES

1. Connect water (if applicable) and electric ser-

vices to refrigerator.

See Installation Instructions (included with

refrigerator) for complete instructions.

2.  ALWAYS use a backup wrench

when loosening or tightening LP gas connec-

tions.

Connect LP gas service.

See Installation Instructions (included with

refrigerator) for complete instructions.

a. If RV LP gas line is long enough to reach

LP gas valve on refrigerator, skip to section

"Finish Installation" on page (6).

Gas line extension is NOT needed if

existing RV LP gas line is long enough.

b. If RV LP gas line does not reach LP gas

valve on refrigerator, proceed to step (c).

c. Connect gas line extension to RV LP gas

line. See (FIG. 5) & (FIG. 6).

● Place and tighten 3/8″ are nipple (pro-

vided with gas line extension) into are

nut of RV LP gas line.

FIG. 5

Gas Line

Extension

LP Gas Line

(From RV)

3/8″ Flare

Nipple

FIG. 6

3/8″ Flare

Nipple

Backup

Wrench

Gas Line

Extension

Line

Wrench

d. Connect gas line extension to LP gas valve

on refrigerator. See (FIG. 7).

It may be necessary to loop gas line

extension.

● Place and tighten are nut of gas line ex-

tension (provided) onto 3/8″ male are

end of refrigerator LP gas valve.

FIG. 7

Gas Line Extension

(Shown Looped)

Line

Wrench

Backup

Wrench

LP gas valve

Additional procedures MUST be performed to

complete installation. See Installation Instructions

(included with refrigerator).

Additional procedures may include:

●Install trim, door panels, and door handles.

●Verify refrigerator is sealed correctly to isolate

combustion system from RV interior.

●Route drain hose.

●Check for gas leaks.

●Test refrigerator operation.

FINISH INSTALLATION

This manual has been provided courtesy of

My RV Works, Inc.

www.myrvworks.com

You can find more RV service manuals here:

www.myrvworks.com/manuals

Over the years of running a mobile RV repair service, having a dedicated place

to access service manuals for all the different appliances and components

found on RVs was something that I always had a desire to create.

I hope this resource makes your RV repairs easier, as it has mine, but please

be careful and follow proper safety practices when attempting to repair

your own RV.

If in doubt, please consult with a professional RV technician!

All service manuals provided on www.myrvworks.com are believed to be

released for distribution and/or in the public domain.

DARREN KOEPP - OWNER, MY RV WORKS, INC.

Altri manuali per DM2652

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Dometic Utensili elettrici

Dometic

Dometic DM2652 Manuale utente

Manuali Utensili elettrici popolari di altre marche

AEG

AEG OMNI-JS Manuale utente

SIP

SIP 01533 Manuale utente

Ribimex

Ribimex PRS499 Manuale utente

3M Fiber Optic Connector Crimp Tool Manuale utente

Ryobi

Ryobi P524 Manuale utente

ROJEK

ROJEK FSN 300A Manuale utente

Kemper

Kemper 1740PRO Manuale utente

WABCO

WABCO OptiTire Manuale utente

EINHELL

EINHELL TE-MS 18/210 Li Manuale utente

Orgapack

Orgapack OR-T 85 Guida rapida

TOUGHCUT

TOUGHCUT Diamond 400 Manuale utente

Yaros

Yaros PB-3603 Manuale utente

Fein

Fein BSS 2.0 E Guida all'installazione

Baileigh Industrial

Baileigh Industrial SS-2725 Manuale utente

Milwaukee

Milwaukee 2674-20 Manuale utente

Fein

Fein BLs 1.6 Manuale utente

Princess

Princess Electric Multi Sharpener Manuale utente

FOREDOM

FOREDOM K.1050 Manuale