DOMUSA TEKNIK EVOLUTION EV 25 HAM Manuale utente

INSTALLATION AND OPERATING INSTRUCTIONS

 EVOLUTION EV HAM

Thank you for choosing a DOMUSA TEKNIK heating boiler. From the

range of DOMUSA TEKNIK products you have chosen the Evolution EV

HAM model. This boiler is capable of providing you with the

temperature comfort suitable for your home, as well as balanced and

economical Domestic Hot Water (DHW). This always together with a

properandgas-oilfedhydraulicinstallation.

Thismanualformsanessential partof the productand it mustbe given

to the user. Read the warnings and recommendations in the manual

carefully, as they contain important information on the safety, use and

maintenanceoftheinstallation.

Theseboilersaretobeinstalledbyskilledpersonnelonly,inaccordance

with the legislation in force and following the manufacturer’s

instructions.

Thestart-upoftheseboilersandanymaintenanceoperationsmustonly

be carried out by DOMUSA TEKNIK’s Authorised Technical Assistance

Services.

Incorrect installation of these boilers could result in damage to people,

animals or property, and the manufacturer will hold no liability in such

cases.

DOMUSATEKNIKinformsallpartiesconcernedthat,incompliancewith

section 1 of the first additional provision of Law 11/1997, the

responsibility for delivering packaging waste or used packaging for its

properenvironmentalmanagementwillbethatofthefinalownerofthe

product. At the end of its useful life, the product must be taken to a

selectedcollectionpointforelectricalandelectronicequipmentormust

be returned to the distributor at the time of purchasing a new

equivalent appliance. For more detailed information on the collection

schemes available, contact either the collection facilities of the local

authorityorthedistributorwherethepurchasewas made.

CONTENTS Page

1LIST OFCOMPONENTS.........................................................................................................................................................................................2

2CONTROL COMPONENTS....................................................................................................................................................................................3

3INSTALLATIONINSTRUCTIONS..........................................................................................................................................................................4

3.1LOCATION................................................................................................................................................................................................................................................4

3.2HYDRAULIC INSTALLATION .....................................................................................................................................................................................................................4

3.3ELECTRICAL CONNECTION.......................................................................................................................................................................................................................4

3.4FUELINSTALLATION................................................................................................................................................................................................................................4

3.6INSTALLING THE SRAM2/EVUNDERFLOORHEATING KIT (OPTIONAL)...............................................................................................................................................5

3.7INSTALLING HEATING CIRCUIT 2(OPTIONAL).........................................................................................................................................................................................5

4COMBUSTION PRODUCTS EXHAUSTION.......................................................................................................................................................6

4.1EXTERNAL POSITION OF THEGAS EVACUATION PIPES TERMINAL............................................................................................................................................................6

4.2PREPARATION OF THE BURNER AIR INTAKE FOR BALANCED FLUE OPERATIONMODE .............................................................................................................................7

4.3COMBUSTION PRODUCTS EXHAUSTION ANDAIR INTAKE DUAL-DUCTDEVICEØ80(TYPR C53).............................................................................................................8

4.4DOUBLE CONDUIT TO COAXIAL EXHAUSTION TRANSFORMATION ..........................................................................................................................................................9

4.5COMBUSTION PRODUCTS EXHAUSTION ANDAIR INTAKE HORIZONTALLY-ARRANGED COAXIAL DEVICE Ø80-125(TYPE C13).........................................................10

4.6COMBUSTION PRODUCTS EXHAUSTION ANDAIR INTAKE VERTICALLY-ARRANGED COAXIAL DEVICE Ø80-125(TYPE C33)...............................................................11

5FILLING THE INSTALLATION............................................................................................................................................................................12

6DRAINING THE BOILER.......................................................................................................................................................................................12

7 SHUTTING DOWN THEBOILER........................................................................................................................................................................12

8FIRST START-UP...................................................................................................................................................................................................12

9INSTALLATIONDELIVERY..................................................................................................................................................................................12

10DIGITAL DISPLAY..............................................................................................................................................................................................13

11TEMPERATURESELECTION............................................................................................................................................................................15

11.1SELECTING THE BOILERSETPOINT TEMPERATURE...............................................................................................................................................................................15

11.2SELECTING THE DHWSETPOINT TEMPERATURE ...............................................................................................................................................................................15

11.3SELECTING THE UNDERFLOOR HEATING FLOW SETPOINT TEMPERATURE (WITH SRAM2/EVKIT OPTION)....................................................................................16

12OPERATION.........................................................................................................................................................................................................16

12.1HEATING FUNCTION ..........................................................................................................................................................................................................................16

12.2DOMESTIC HOT WATER PRODUCTION FUNCTION.............................................................................................................................................................................17

12.3FUNCTIONING WITH AN SRAM2/EVUNDERFLOOR HEATING KIT(OPTIONAL).............................................................................................................................17

12.4HEATING CIRCUIT 2FUNCTIONING (OPTIONAL)................................................................................................................................................................................18

13ADDITIONALFUNCTIONS..............................................................................................................................................................................18

13.1PUMP ANTI-BLOCK FUNCTION ...........................................................................................................................................................................................................18

13.2ANTI-FROSTFUNCTION......................................................................................................................................................................................................................18

13.3BOILER PRESSURE SENSOR FUNCTION................................................................................................................................................................................................18

13.4TELEPHONERELAY CONNECTION.......................................................................................................................................................................................................18

13.5ROOM THERMOSTAT CONNECTION....................................................................................................................................................................................................18

13.6KEYPAD BLOCK FUNCTION.................................................................................................................................................................................................................19

14SAFETY CUT-OUTS............................................................................................................................................................................................20

14.1TEMPERATURE SAFETY CUT-OUT........................................................................................................................................................................................................20

14.2BURNERCUT-OUT..............................................................................................................................................................................................................................20

14.3LOW PRESSURE CUT-OUT...................................................................................................................................................................................................................20

15BOILER MAINTENANCE...................................................................................................................................................................................21

15.1CLEANING THE BOILER .......................................................................................................................................................................................................................21

15.2ANTI-FROST PROTECTION ..................................................................................................................................................................................................................22

15.3BOILER WATER CHARACTERISTICS......................................................................................................................................................................................................22

16CIRCULATINGPUMP FLOW CURVES...........................................................................................................................................................23

16.1CHARACTERISTIC CURVES OF THE PUMP............................................................................................................................................................................................23

16.2REGULATION OF THE CIRCULATION PUMP.........................................................................................................................................................................................23

16.3PRESSURE DROP.................................................................................................................................................................................................................................23

17DIAGRAMS AND MEASUREMENTS..............................................................................................................................................................24

18TECHNICALCHARACTERISTICS....................................................................................................................................................................25

19ALARM CODES...................................................................................................................................................................................................26

20CONNECTIONDIAGRAM................................................................................................................................................................................27

21ELECTRICALDIAGRAM....................................................................................................................................................................................28

22BURNER................................................................................................................................................................................................................29

22.1ASSEMBLY..........................................................................................................................................................................................................................................29

22.2BURNER START-UP.............................................................................................................................................................................................................................29

22.3ADJUSTING THE COMBUSTION CONDITIONS......................................................................................................................................................................................29

22.4OIL PRESSURE ADJUSTMENT ..............................................................................................................................................................................................................31

22.5OIL SUPPLY PIPING DIAGRAMS...........................................................................................................................................................................................................31

22.6TECHNICAL SPECIFICATIONS ..............................................................................................................................................................................................................32

22.7NOZZLES............................................................................................................................................................................................................................................32

22.8ELECTRICAL CONNECTION DIAGRAM .................................................................................................................................................................................................32

22.9QUICK CONNECTOR ...........................................................................................................................................................................................................................33

22.10BURNER CONTROL OPERATINGSEQUENCE......................................................................................................................................................................................34

23FAILURES.............................................................................................................................................................................................................35

24SPARES LIST........................................................................................................................................................................................................37

BOILER.........................................................................................................................................................................................................................................................37

BURNER.......................................................................................................................................................................................................................................................39

Evolution EV HAM

1 LIST OF COMPONENTS

11 12

1. Drainagevalve.

2. Domesticbalacedflueburner.

3. Combustionairinlet.

4. Hotwaterheatexchanger.

5. Fillingvalve.

6. Heatingcirculating pump.

7. Hotwaterchargepump.

8. Boiler temperature sensors.

9. Safety valve.

10. Pressuresensor.

11. Automaticairvent.

12. Expansionvessel.

13. Stainlesssteelcondenser.

14. Fumeexhaustionduct.

15. Steelbody.

16. Flowswitch.

17. Hotwaterflowlimit.

18. Hotwatertemperaturesensor.

2 CONTROLCOMPONENTS

20 22 2321 24

26 25

19.Digitaldisplay:

Thisistheboilerfunctioningdisplay,onwhichall

the operating information, settings and values

appear. In standard operating mode (default

display), the actual boiler temperature is shown.

If any malfunctioning should occur, the

corresponding alarm code will appear on the

digitaldisplay.

20.Boilertemperaturetouchbutton:

This is used to select the boiler setpoint

temperature. If oFF is selected, the heating

function is disabled. To select the desired

temperature, simply place your finger on the "+"

or"-"symbols onthetouchbuttonto increaseor

decrease the desired boilertemperature.

21. MODEtouch button:

When this button is touched the different boiler

temperaturesappearonthedigital display.

22.ONtouchbutton:

If you place your finger on this button for 1

secondtheboilerwillswitchonoroff.

23. RESETtouch button:

If the boiler is in lock-out mode as the alarm has

been triggered, touch the RESET button to reset

the lock-out and restore functioning. If you are

modifying any of the settings or browsing the

user menu, you may touch the RESET button to

exit the menu WITHOUT SAVING and return to

thepreviousmenulevel.

24.DHWtemperaturetouchbutton:

This is used to select the setpoint temperature

for domestic hot water. If oFF is selected, the

DHW function will be disabled. To select the

desiredtemperature,simplyplaceyourfingeron

the "+" or "-" symbols on the touch button to

increase or decrease the desired DHW

temperature.

25.Boilersafetythermostat:

This is a cut-out mechanism to ensure the boiler

temperaturedoesnotexceed110ºC.

26.Fumesafetythermostat:

This safety thermostat operates when the

temperature of the combustion products

exceeds 110ºC, in order to protect the

polypropyleneduct.

Evolution EV HAM

3 INSTALLATIONINSTRUCTIONS

TheboilermustbeinstalledbypersonnelauthorisedbytheDepartmentofIndustryinaccordancewith

the applicable regulations and standards in force. However, the following recommendations must be

compliedwithwheninstallingthe boiler:

3.1 Location

The boiler must be installed in a enough ventilated room and sufficient access space must be

maintained to carry out preventive or corrective maintenance operations.

3.2 HydraulicInstallation

The hydraulic installation must be made by qualified personnel. The applicable installation

legislation is to be complied with, and the following recommendations should also be taken into

account:

-Theinsideoftheinstallationpipingshouldbethoroughlycleanedbeforeswitchingontheboiler.

-Werecommendinsertingcut-offvalvesbetweentheinstallationpipingandtheboilertosimplify

maintenancetasks.

- If a shut-off valve is fitted at the DHW inlet, it must have a safety valve incorporated, calibrated

to9bar.

- For correct boiler functioning, there must be a pressure of at least 0.5 bar in the domestic hot

watercircuit.

- Before starting up the unit, it is essential to install the condensation siphon supplied with the

boilerdocumentationonthecondensationdraintubeonthebackoftheboiler.

-The condensation pipe should lead to a drain outlet,as

the Evolution boiler is a condensation boiler and a large

amount of water may be generated. This connection

should be made in accordance with the regulations for

draining off condensation water to the drain network.

- Fill the siphon with water before starting up the unit, to

preventfumescomingoutofit.

3.3 ElectricalConnection

The boiler is equipped for connection at 230 V~, 50 Hz to terminals 1and 2of terminal strip J1 (see

“

ElectricalConnection Diagram

”). Remembertoearththeappliance.

The boiler has two terminal strips, TA1(J5) and TA2(J7) for connecting room thermostats or room

chronothermostats(see“

ElectricalConnectionDiagram

”)forremotecontrolofheatingcircuits1and

2 respectively. To correctly connect the room thermostats, firstly remove the bridge joining the

terminalsofterminal stripTA1.Forconnectionto TA2,simplyconnect thethermostattotheterminal

strip.

3.4 FuelInstallation

The Evolution boiler is supplied with a Domestic sealed oil burner

(2)

(see model in “Technical

Characteristics”). For the fuel installation, proceed in accordance with the burner instructions

enclosed with this manual (see “Burner” section). The oil line installation and start-up of the burner

mustbecarriedoutbyqualified,authorised personnel.

3.5

3.6 InstallingtheSRAM2/EVUnderfloorHeating Kit (Optional)

The procedure for suitably connecting the SRAM2/EV Underfloor Heating Kit to the Evolution EV

HAMboilerisasfollows:

-Unplug the boiler from the mains.

- Connect a flow temperature sensor (supplied with the kit) to sensor terminal strip J3 (terminals

15 and 16), first removing the resistance (Rr) supplied by default (see “Electrical Connection

Diagram").

-Fitthetemperaturesensorbulbaccording to theinstructions enclosed with thekit.

- Connect the heating pump to supply terminal strip J2 on the circuit 1 pump connection (pump

BC1;terminals N and 7)(see“Electrical Connection Diagram").

- Connect the PWMCcable to sensor terminal strip J3 (terminals 13 and 14) (see “Electrical

ConnectionDiagram").

-Connectthe3-waymixervalvemotortosupplyterminalstripJ2(terminalsN,8(+)and9(-))(see

“ElectricalConnectionDiagram").

Forcorrecthydraulicinstallation,carefullyfollowtheassemblyandconnectioninstructionsenclosed

withtheSRAM2/EV kit.

3.7 Installing heatingcircuit 2 (Optional)

All the models in the Evolution range of boilers are supplied with a circulation pump connected to

heating circuit 1 (BC1). In addition to this circuit, all the models are designed to control a second

heatingcirculationpumpina second heating circuit (circuit 2, BC2).

The hydraulic installation of heating circuit 2 should be made using the optional flow circuit (IC') on

therearoftheboiler(see"DiagramsandMeasurements").IfthereisanSRAM2/EVunderfloorheating

kitconnectedtotheoptionalflowIC',heatingcircuit2shouldbeconnectedattheadditionalsockets

providedinthekit(on the boiler T-connectors).

Thecirculationpumpinstalledinheatingcircuit2mustbeelectricallyconnectedbetweenterminals

Nand6onthe supply connectorblockJ2(see “Electrical Connection Diagram").

Evolution EV HAM

4 COMBUSTION PRODUCTS EXHAUSTION

The Evolution boilers are balanced flue oil boilers, so that the combustion products exhaustion is

carried out by means of an outlet duct and an air intake from outside. It can also work by taking the

air intake for the burner from the room, this is how the boilers come set from factory. To operate in

this mode, the room must be sufficiently ventilated and not obstruct or block any ventilation

openings.

4.1 External position of the gasevacuationpipesterminal

The installation of exhaustion of the products of combustion has to be carried out by qualified

personnel staff and it will fulfill the requirements demanded in the legislation and effective

regulatory schemes.

Itisrecommendedthatthepositionattheexhaustionductexteriorportionshouldbeinaccordance

with the data of the following figures and table:

Exhaustionduct position Minimum distance

(mm)

A underacornice 300

B betweentwo horizontalducts 1000

Cfrom an adjacent window 400

D betweentwo verticalducts 1500

E fromanadjacent ventilationgrille 600

F under a balcony (*) 300

G under a window 600

Hundera ventilationgrille 600

I froma recess inthe building 300

Jfrom acorner of the building 300

Kfrom thefloor 2500

Lfrom a verticalor horizontal duct or outlet (**) 300

M fromafrontalsurface at adistanceof 3 metres from thefume outlet 2000

Nas above,butwith an opening 3000

(*)Providing the width of the balcony is not over 2000 mm.

(**)If the materials from which the pipe is made are sensitive to the action of the flue gases, this distance should be over 500 mm.

IMPORTANT: All accessories used for combustion product removal and air intake are to be those

supplied by DOMUSA TEKNIK.

4.2 Preparationoftheburnerair intake for balanced flue operation mode

Evolution boilers come prepared from factory for operation by taking the intake air for the burner

fromtheroom.

In case of choosing room sealed mode operation, with the evacuation of the combustion gases

through an outlet conduct and a independent external air intake, air intake for the burner must be

preparedfollowing these instructions:

- Removethetoppanel (1).

- Turn the air intake conduct (2) andtakeouttheairintaketerminal (3) porfromtheback(4).

- Tie air intake terminal (3) atthe back (4) with twoscrews (5) (included in the documentation

bag).

- Removethegrid(6)(this won´t be used).

- Reattachtheroof(1).

Evolution EV HAM

4.3 Combustionproductsexhaustion and airintake dual-duct device ø80 (typr C53)

For this type of boiler, the removal of combustion products and air intake take place through

separate Ø80 mm. dual ducts. The Ø80 dual duct outlet kit, code CGAS000186, is used for this

purpose.This is the type of fume removal provided for Evolution boilersby default.

The maximum length of pipe that can be installed is 15 metres for the model EV 35 HAM and 17

meters for the model EV 25 HAM, which is the result from adding the pipe metres for the air intake

and those of the combustion products exhaustion. Each elbow of 90°, or two of 45°, reduces the

availablelengthby1meter andeachhorizontal meter is equivalent to 2vertical meters.

It is recommended that the exhaustion duct be fitted in a slightly upwardly-inclined direction, at

around2º-3º,thuspreventinganywaterandcondensationfromdrippingout.

Dual-ductoutletKit∅80/100 inox

Cod.CGAS000265

1m. duct∅80 inox. Cod. CGAS000145

1m.duct∅100inox. Cod.CGAS000268

1m.duct∅100PP Cod.CGAS000355

90º elbow∅80 inox Cod.CGAS000147

90ºelbow ∅100inox Cod. CGAS000267

90ºelbow ∅100PPCod. CGAS000358

45ºelbow ∅80inox.Cod. CGAS000148

45º elbow∅100 inox. Cod. CGAS000266

45ºelbow ∅100PPCod. CGAS000357

Examplesofinstallation:

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali DOMUSA TEKNIK Bruciatore

DOMUSA TEKNIK

DOMUSA TEKNIK Domestic D-3 Manuale utente

Manuali Bruciatore popolari di altre marche

Riello

Riello RS 28/M Guida rapida

True Induction

True Induction TI4B Manuale utente

Weishaupt

Weishaupt WG20 Series Manuale utente

Carolina Cooker

Carolina Cooker M116672 Manuale utente

Riello

Riello RX 500 S/PV Manuale di istruzioni

Unigas

Unigas HTP2000 Manuale utente

baltur

baltur BT 250 DSG 4T Manuale utente

muenkel design

muenkel design round burner Manuale utente

Ecoflam

Ecoflam Multicalor 170.1 Manuale utente

baltur

baltur BT 14 DSGW Manuale utente

artisan

artisan Art-SB1 Guida

Riello

Riello P 140 T/G Guida rapida

AESYS

AESYS TurboFire II Manuale utente

Riello

Riello RG1RKD Guida rapida

IKEA

IKEA GRILLSKÄR Manuale utente

RUSTA

RUSTA SAREK Manuale utente

PROPOINT

PROPOINT 8933657 Manuale utente

baltur

baltur TBL 1000 ME Manuale di riferimento