Doosan Tugger BWT45S-7 Manuale utente
Original InstructionsCopyright DOOSAN 2014
Operation Manual
Tugger
BWT45S-7 OM 514
July 2014
DOOSAN and the DOOSAN logo are registered
trademarks of DOOSAN Corporation in the United
States and various other countries around the
world.
BWT45S-7 OM 514
I
Foreword
1Foreword
This Operation & Maintenance Manual was written to give owner
or operator instructions on safe operation and maintenance of
DOOSAN equipment. READ AND UNDERSTAND THIS
OPERATION AND MAINTENANCE MANUAL BEFORE
OPERATING YOUR DOOSAN EQUIPMENT. Keep this manual
with the machine so it is always available. If it is lost, order
another one from your DOOSAN distributor.
If there are any questions, contact your DOOSAN distributor.
This manual may illustrate options and accessories not installed
on your equipment.
Any modification made without written authorization or approval
from DOOSAN can create a safety hazard.
Always replace parts with genuine DOOSAN parts or DOOSAN
authorized replacement parts.
BWT45S-7 OM 514Foreword
II
SAFETY MESSAGES
Safety messages and safety decals included in this manual and
on the machine provide instructions how to operate, service and
maintain the machine. Safety messages and safety decals
indicate potential hazards and describe safety precautions
required to avoid hazards. Operator and maintenance personnel
should read and understand these safety messages and decals
before beginning operation or maintenance.
Signal Words
The signal words "DANGER", "WARNING", "CAUTION" are
used throughout safety messages and safety decals in this
manual or on the machine. They indicate an existence of, and
the relative seriousness of, a hazard. All three indicate that a
safety risk is involved. Observe the precautions indicated
whenever a Safety Alert Symbol is present, no matter which
signal word appears next to it.
SAFETY ALERT SYMBOL
Be Prepared - Get to Know All Operating and Safety
Instructions.
This is a Safety Alert Symbol. Wherever it appears in this
manual or on safety decals on the machine, you must be
alert to the potential for personal injury or accidents.
Always observe safety precautions and follow
recommended procedures.
DANGER
DANGER -This signal word is used on safety messages and
safety labels and indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
WARNING
WARNING -This signal word is used on safety messages and
safety labels and indicates a potentially hazardous situation
which, if not avoided, could result in death or serious injury.
CAUTION
CAUTION -This signal word is used on safety messages
and safety labels and indicates a potentially hazardous
situation which, if not avoided, could result in minor or
moderate injury.
BWT45S-7 OM 514
III
Foreword
Other Signal Words
In addition to safety signal words, the following signal words are
used to indicate proper and effective use of machine.
NOTE: The word "NOTE" identifies information for effective
use.
AEM SAFETY MANUAL
(NORTH AMERICA ONLY)
The AEM Safety Manual delivered with the machine gives
general safety information.
The AEM Safety Manual must be read and understood before
beginning operation or maintenance and is not intended to
replace the Operation & Maintenance Manual delivered with the
machine.
IMPORTANT
This signal word identifies procedures which must be
followed to avoid damage to machine.
BWT45S-7 OM 514Foreword
IV
PRODUCT INFORMATION
Intended Use
The machine is intended to be used under normal conditions for
applications described in this manual. If it is used for other
purposes, or in potentially hazardous environments, special
precautions must be followed and the machine must be
equipped for such use. Examples include, but are not limited:
falling object guards, work lights, etc. Do not engage in
prohibited uses as described in this manual. Contact your
DOOSAN distributor for further information.
Machine Capacity
Do not exceed machine capacity by modifying machine or using
unapproved attachments.
Exceeding machine capacity can adversely affect machine
performance characteristics such as: stability, system
certifications such as brakes and steering, and can result in
death or serious injury. Contact your DOOSAN distributor for
further information.
BWT45S-7 OM 514
V
Foreword
PRODUCT IDENTIFICATION
With the aid of the product plates, shown below, it is possible to
identify the machine and its components. The first two blocks
indicate the model and the serial number of the machine. Make
a note of the identification numbers.
When ordering spare parts, and in all telephone inquiries or
correspondence, the model and serial number of the machine,
must always be referenced.
The product plate provides the operator with the model number
and serial number for ordering parts. It also provides information
on lift height, battery capacity, service weight, rated capacity,
weight without batteries, allowed battery weight and voltage.
D1064
BWT45S-7 OM 514
I
Table of Contents
Table of Contents
Safety..........................................................................................1-1
Safety Decals.....................................................................................1-2
General............................................................................................1-11
Operation.........................................................................................1-17
Maintenance ....................................................................................1-25
Transportation..................................................................................1-36
Environment and Circumstances.....................................................1-38
Operating Controls....................................................................2-1
Component Locations........................................................................2-2
Operator's Controls............................................................................2-3
Operation....................................................................................3-1
To Operate The Tugger......................................................................3-1
Starting and Stopping Engine............................................................3-2
Inspection, Maintenance and Adjustment...............................4-1
Maintenance Information ...................................................................4-1
Machine Setup Position for Maintenance...........................................4-4
Maintenance Access..........................................................................4-5
Specifications ............................................................................5-1
Specifications.....................................................................................5-2
Indice
