Dormakaba RTS Series Manuale utente

RTS Series Package 26 (8812/Y)

Offset slide arm aluminum door and frame - pivots

Installation instructions

08279241 – 02-2020

| EN |

2RTS88 Closers 02-2020

08279241

dormakaba RTS88 Package 26 (8812/Y) Installation Instructions Table of Contents

Table of contents

1 Installation instructions 3

1.1 Prepare frame and install closer 3

1.2 Prepare top of door 4

2 Adjustments 5

2.1 Adjust closing speeds 5

2.2 Optional 8511 applied stop (or stop by others) 5

dormakaba RTS88 Package 26 (8812/Y) Installation Instructions

08279241 02-2020RTS88 Closers 3

Frame

Closer

. Prepare frame and install closer

1 Installation instructions

Fig.

1.1.1 Prepare header and side jamb according to

template.

1.1.2 Fasten mounting bracket to header with two

10-32 flat head machine screws.

1.1.3 Fasten two 1/4-20 flat head machine screws to

header with lock washers and nuts.

1.1.4 Fasten angle bracket to closer with two hex

head machine screws and flat washers.

1.1.5 Install 2 fillister head machine screws into

mounting tabs on closer; make approximately 3

turns.

1.1.6 Install closer into header by inserting

mounting tabs into mounting bracket.

1.1.7 Raise end of closer with angle bracket onto

the two 1/4-20 screws.

1.1.8 Fasten angle bracket with the two remaining

1/4-20 nuts and lock washers.

1.1.9 Tighten the 2 fillister head machine screws

securely.

1.1.10 Install cover plate by sliding tab into frame.

1.1.11 Fasten opposite end to mounting bracket with

two No. 8-32 flat head machine screws

provided.

105

Header

Side

jamb

Mounting

bracket

1/4-20 flat

head machine

screws

Angle bracket

Fillister head

machine

screws

Closer

Cover plate

dormakaba RTS88 Package 26 (8812/Y) Installation Instructions

08279241 02-2020RTS88 Closers

Top of door

. Prepare top of door

Fig.

1.2.1 Prepare top of door according to template.

1.2.2 Assemble shock spring.

1.2.3 Slide assembled shock spring into track so end

with screw faces the 90° and 105° markings on

the track.

1.2.4 Align edge of shock spring assembly to coincide

with 90° or 105° deadstop in closer.

1.2.5 Secure shock spring assembly to track with

button head machine screw and 1/8” hex

wrench.

1.2.6 Insert slide block pin through slide block before

inserting slide block into track.

1.2.7 Fasten track to door with four No. 10-32 flat

head machine screws.

1.2.8 Slide arm onto spindle as shown, and tighten

the 1/4-20 socket head cap screw securely.

1.2.9 Position door at approximately 45° of opening.

1.2.10 Preload arm to a position where the hole in

arm aligns with slide block pin.

1.2.11 Thread slide block pin into arm wiht 3/16” hex

wrench.

1.2.12 TIGHTEN SECURELY!

105

Header

Side

jamb

Button

head

machine

screw

Shock spring

Closer

Cover plate

Track

Slide block pin

(not shown)

Slide block

No. 10-32 flat

head machine

screws

Arm

1/4-20

socket head

cap screw

Shock spring

Track

Applied stop

90° shock spring

setting shown

dormakaba RTS88 Package 26 (8812/Y) Installation Instructions

08279241 02-2020RTS88 Closers 5

Adjustments - closing speeds

8511 applied stop

2 Adjustments

2.1.1 Valve “A” - controls closing speed from

maximum opening angle to 0°.

• Clockwise - decreases closing speed

• Counter-clockwise - increases closing speed

2.1.2 Valve “B” - increased closing speed from

maximum openig angle to 20°.

Counter-clockwise - increases closing speed.

Valve “B”

“A”

“B”

Valve “A”

. Adjust closing speeds

Fig.

. Optional  applied stop (or stop by others)

Fig.

2.1.1 Prepare header according to template above. 2.1.2 Install applied stop as shown in Fig 2. with

three No.10-32 flat head machine screws.

1”

[25]

1”

[25]

1/8”

[3]

2”

[51]

Clearance

Front view

Bottom view

Cutout in stop

For 10-32 machine screws use No.21

drill and tap

One hole in cover plate

Two holes in frame

8511 applied stop

1-1/4”

[32] 7/8”

[22]

14-1/4”

[362]

1/2”

[13] 17-1/2”

[445]

35”

[889]

Side view

www.dormakaba.us

dormakaba

DORMA USA, Inc.

T: 800-523-8483

Altri manuali per RTS Series

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Dormakaba Sistema di apertura della porta

Dormakaba

Dormakaba GSR-EMR XEA BG Manuale utente

Dormakaba

Dormakaba ED250 Manuale utente

Dormakaba

Dormakaba Best SL6000 SIS Manuale utente

Dormakaba

Dormakaba ITS 915 Series Manuale utente

Dormakaba

Dormakaba TS 98 XEA Manuale utente

Dormakaba

Dormakaba TS 92 G BASIC EN 1-4 Manuale utente

Dormakaba

Dormakaba 7400 DS Manuale utente

Dormakaba

Dormakaba G-Ubivis XEA Manuale utente

Dormakaba

Dormakaba ED50 Manuale utente

Dormakaba

Dormakaba TS 97 FL XEA Manuale utente

Dormakaba

Dormakaba ED900 Manuale utente

Dormakaba

Dormakaba ED100 Manuale utente

Dormakaba

Dormakaba ED50LE Manuale utente

Dormakaba

Dormakaba GSR-EMR XEA BG Manuale utente

Dormakaba

Dormakaba 8907 AF PKT Manuale utente

Dormakaba

Dormakaba UNIVERSAL PT 60 Manuale utente

Dormakaba

Dormakaba CS 80 MAGNEO Manuale utente

Dormakaba

Dormakaba ED50LE Manuale utente

Dormakaba

Dormakaba ORACODE 480 Series Manuale utente

Dormakaba

Dormakaba ITS 96 Manuale

Dormakaba

Dormakaba 1856 HT SD Manuale utente

Dormakaba

Dormakaba ED50 Manuale utente

Dormakaba

Dormakaba RTS Series Manuale utente

Dormakaba

Dormakaba ITS9613 Manuale utente

Manuali Sistema di apertura della porta popolari di altre marche

Pamex

Pamex KT-INP35 Manuale utente

Label

Label NEPTIS/LE Manuale utente

Cal-Royal

Cal-Royal N-F77CVR Manuale utente

Scrigno

Scrigno OPEN1000 Manuale utente

TriMark

TriMark UM 34 Manuale utente

BFT

BFT WIND RMB 130B 200 Manuale utente

Alecto

Alecto ADI-250 Manuale utente

Besam

Besam Swingmaster MP Guida

CRL

CRL SENIOR PRIMA Manuale utente

Assa Abloy

Assa Abloy SARGENT 1431 Series Manuale utente

GAL

GAL MOVFR Scheda tecnica

Olide

Olide 120B Manuale utente

Normstahl

Normstahl IDO7 Manuale utente

Häfele

Häfele Finetta T 70 VF Manuale utente

AGS

AGS D-PL Manuale

Stanley

Stanley MA900ñ Istruzioni per l'installazione

WITTUR

WITTUR Hydra Plus UD300 Manuale

Alutech

Alutech TR-3019-230E-ICU Istruzioni per l'installazione e il funzionamento