THANK YOU
• Thank you for purchasing your Dracast STUDIO Series LED2000. We’re
condent that your Dracast light will provide years of reliable service.
• Please review this instruction booklet before using your Dracast light.
• To ensure proper continued operation, only use the power supply that is
included with your Dracast LED2000.
• To protect your eyes, do not look directly into the LED2000 while it is
powered on.
• To prevent electric shock, the LED2000, power supply, and any batteries
should be kept away from water or excessive moisture. Never submerge
the LED2000 or power supply.
• Make sure that the ventilation slots on the back of the LED2000 are clear
during operation. Covering these vents will cause the unit to overheat and
possibly malfunction.
• To extend the life of the LED2000, turn the unit o when it is not in use.
• Store the LED2000 in a clean, dry place with good ventilation. Do not store
the LED2000 in direct sunlight for extended periods.
• In case of malfunction, do not open your Dracast LED2000 unit. Please
consult your nearest Dracast repair center for assistance. Opening the
Dracast unit will void its one-year warranty.
FEATURES
• Anodized aluminum frame and all-metal chassis
• DIgital display with light output, color temperature, and DMX address
• Local and remote DMX control
• 95 CRI (Color Rendering Index) for ultra-pure light
• High output. Up to 10000 Lux or 929 Footcandles
• Included mounting yoke for use with 5/8”(baby pin) studs
• Locking yoke knobs
• Optional barn doors, lters, soft boxes, and more
• x1 Dracast STUDIO Series LED2000
• x1 24V A/C Power Supply for LED2000
• x1 5/8” Mounting Yoke
• x1 Nylon soft carrying case
• x1 Clear plastic LED board protector
INCLUDED IN THE BOX
