Dragino LPS8v2 Manuale utente

LPS8v2 LoRaWAN Indoor Gateway User Manual

last modiﬁed by Xiaoling

on 2023/03/22 17:06

Table of Contents

1. Introduction .......................................................................................................................................................................... 4

1.1 What is LPS8v2 ............................................................................................................................................................. 4



Table of Contents：

•1. Introduction

•1.1 What is LPS8v2

•1.2 Speciﬁcations

•1.3 Features

•1.4 Block Diagram

•1.5LED Indicators

•1.6 Button Intruction

•2. Quick Start

•2.1 Connects to the network and accesses the gateway Web UI

•2.1.1 connect the network

•Method 1: Connect via Ethernet with DHCP IP from the router

•Method 2: Connect via LPS8-V2 Fallback IP

•Method 3: Connect via WiFi with DHCP IP from the router

•2.1.2 Access Conﬁgure Web UI

•2.2 The LPS8-V2 is registered and connected to The Things Network

•2.2.1Select your area frequency

•2.2.2 Get the only gateway EUI

•2.2.3 Register the gateway to The Things Network

•3. Web Conﬁgure Pages

•3.1 Home

•3.2 LoRa Settings

•3.2.1 LoRa --> LoRa

•3.3 LoRaWAN Settings

•3.3.1 LoRaWAN --> LoRaWAN Semtech UDP

•3.3.2 LoRaWAN --> LoRaWANBasic Station

•3.4Network Settings

•3.4.1 Network --> WiFi

•3.4.2 Network --> System Status

•3.4.3Network --> Network

•3.4.4Network --> Cellular

•3.5 System

•3.5.1 System --> System Overview

•3.5.2 System --> System General

•3.5.3 System --> Backup/Restore

•3.5.4 System --> Remoteit

•3.5.5 System --> Package Management

•4. Build-in Server

•4.1 LoRaWAN Network Server -- The Things Network - Stack (TTN-V3)

•4.1.1 The LPS8-V2 is registered and connected to Built-inThe Things Network

•4.2 Application Server -- Node-Red

•Using Node-Red, InﬂuxDB and Grafana

•4.3How to disable the built-in server

•4.4How to use ChirpStack on LPS8-V2

•5. How users can access LPS8-V2 using serial USB

•6. Use the helium gateway-rs as the Data-only Hotspot

•Step 1: Conﬁgure Frequency Band

•Step 2: Conﬁgure the forward address

•Step 3: Download and Install the Helium-gateway-rs

•7. OTA System Update

•8. Trouble Shooting

•8.1 I can't log in to the built-in Server TTN Stack which shows 'Login failed'.

•9. Supports

•10. Reference

•11. Order Info

•12. Manufacturer Info

•13. FCC Warning

1. Introduction

1.1 What is LPS8v2

The LPS8v2 is an open-source LoRaWAN Gateway. It lets you bridge LoRa wireless network to an IP network

via WiFi , Ethernet or Cellular Network (via Optional 4G module). The LoRa wireless allows users to send data

and reach extremely long ranges at low data rates.

The LPS8v2 is fully compatible with LoRaWAN protocol. It supports diﬀerent kinds of LoRaWAN Network

Connections such as: Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge,

and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.

LPS8v2 also includes a built-in LoRaWAN Server and IoT server, which provide the possibility for the system

integrator to deploy the IoT service without cloud service or 3rd servers.

Diﬀerent countries use diﬀerent LoRaWAN frequency bands. LPS8v2 has these bands pre-conﬁgured. Users can

also customize the frequency bands to use in their own LoRa network.

LPS8v2 supports remote management. System Integrator can easy to remote monitor the gateway and maintain

it.

1.2 Speciﬁcations

Hardware System:

• CPU: Quad-core Cortex-A7 1.2Ghz

• RAM: 512MB

• eMMC: 4GB

Interface:

• 10M/100M RJ45 Ports x 1

• Multi-Channel LoRaWAN Wireless

• WiFi 802.11 b/g/n

• Sensitivity: -140dBm

• Max Output Power: 27dBm

Operating Condition:

• Work Temperature: -20 ~ 70°C

• Storage Temperature: -20 ~ 70°C

• Power Input: 5V, 2A, DC

1.3 Features

• Open Source Debian system

• Managed by Web GUI, SSH via WAN or WiFi

• Remote Management

• Auto-provisioning for batch deployment and management

• LoRaWAN Gateway

• 10 programmable parallel demodulation paths

• Pre-conﬁgured to support diﬀerent LoRaWAN regional settings.

• Allow customizing LoRaWAN regional parameters.

• Diﬀerent kinds of LoRaWAN Connections such as

• Semtech UDP Packet Forwarder

• LoRaWAN Basic Station

• ChirpStack-Gateway-Bridge (MQTT)

• Built-inThe Things Network local LoRaWAN server

• Built-in Node-Redlocal Application server

1.4 Block Diagram

1.5LED Indicators

LPS8-V2 has totally four LEDs, They are:

# Power LED: This RED LED will be solid if the device is properly powered

# ETH LED: This RGB LED will blink GREEN when the ETH port is connecting

# SYS LED: This RGB LED will show diﬀerent colors in diﬀerent states:

# SOLID GREEN: The device is alive with a LoRaWAN server connection.

# BLINKING GREEN: a) Device has internet connection but no LoRaWAN Connection. or b)

Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING

GREEN together

#SOLID RED: Device doesn't have an Internet connection.

# WIFI LED:This LED shows the WIFI interface connection status.

1.6 Button Intruction

LPS8-V2 has a black toggle button, which is:

#Long press 4-5s :the gateway will reload the Network andInitialize wiﬁ conﬁguration

 LED status: ETH LED will BLINKIND BULE Until the reload is ﬁnished.

#Long press more than 10s:the gateway will restore the factory settings.

LED status: ETH LED will SOLID BULE Until the restore is ﬁnished.

2. Quick Start

The LPS8-V2 supports network access via Ethernet or Wi-Fi connection andruns without a network.

In most cases, the ﬁrst thing you need to do is make the lps8-v2 accessible to the network.

2.1 Connects to the network and accesses the gateway Web UI

2.1.1 connect the network

Method 1: Connect via Ethernet with DHCP IP from the router

Connect the LPS8-V2 Ethernet port to your router and LPS8-V2 can obtain an IP address from your router. In the

router's management portal, you should be able to ﬁnd what IP address the router has assigned to the LPS8-V2.

You can also use this IP to connect.

Method 2: Connect via LPS8-V2 Fallback IP

Steps to connect via fallback IP:

1. Connect the PC's Ethernet port to LPS8-V2's WAN port

2. Conﬁgure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252

As in the below photo:

3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.

Method 3: Connect via WiFi with DHCP IP from the router

Fill in the WiFi information by checking the box and clicking Save&Apply

Wi-Ficonﬁguration successful

Indice

Manuali Portale popolari di altre marche

LST

LST M500RFE-AS Manuale utente

Kinnex

Kinnex Media Gateway Manuale utente

2N Telekomunikace

2N Telekomunikace 2N StarGate Manuale utente

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Manuale utente

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Manuale utente

Telsey

Telsey CPVA 500 - SIP Manuale utente

RTA

RTA 460A-NNA4 Scheda tecnica

Shaw

Shaw Gateway HDPVR Manuale utente

ABB

ABB VSN900 Guida rapida

Commander

Commander Pulse Manuale utente

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Manuale utente

NETGEAR

NETGEAR C6300BD Manuale utente

Amit

Amit CDW531AM Manuale utente

HMS

HMS Netbiter EasyConnect EC150 Manuale utente

Huawei

Huawei EchoLife HG620 Manuale utente

AT&T

AT&T U-verse 3801 Manuale per l'uso e la cura

Logic IO

Logic IO RTCU MX2 turbo Manuale utente

Suttle

Suttle MediaMAX MXM-521 Manuale utente