Dragon Touch Vision 4 Lite Manuale utente
USER MANUAL
DragonTouch Vision 4 Lite Action Camera
v3.0
01 - 21English
22 - 42Deutsch
43 - 63Español
64 - 84Français
85 - 105Italiano
106 - 126日本語
What's in the Box
Your Vision 4 Lite
Getting Started
Overview of Modes
Customizing Your Vision 4 Lite
Connecting to the App
Playing Back Your Content
Deleting Your Content
Offloading Your Content
Adjusting the Zoom Level
Maintaining Your Camera
Maximizing Battery Life
Battery Storage and Handling
Remote
Mounting Your Camera
Contact Us
2
3
5
6
7
13
14
14
15
15
15
16
16
17
19
21
CONTENTS
1
EN
2
WHAT'S IN THE BOX
Mount 6
Mount 3 Mount 5Mount 4
Mount 7 Mount 8 Mount 9
Lens Cloth
Tethers
Mount 2
Bandages
USB CableBattery
Vision 4 Lite Mount 1
Remote Quick Start Guide
Quick Start Guide
DragonTouch Vision 4 Lite Action Camera
Helmet Mounts
Handle Bar/
Pole Mount
Waterproof
Housing
Protective
Backdoor
Wrist Strap
for Remote
EN
3
YOUR VISION 4 LITE
1
23
4
5
6
710
11
8
9
EN
4
Shutter/Select Button
Power/Mode/Exit Button
Memory Card Slot
USB Port/External Mic Jack
Micro HDMI Port
Lens
Screen
Charging Indicator
Working Indicator
Up/Zoom Out/Wifi Button
Down/Zoom in Button
Battery Door
Note: The camera does not record sound when it is in the waterproof case.
1
2
3
4
5
6
7
8
9
10
11
12
12
EN
5
GETTING STARTED
Welcome to your DragonTouch Vision 4 Lite. To capture videos and photos,
you need a memory Card (sold separately) to start recording.
Memory Cards
Please use brand name memory cards that meet these requirements:
• Class 10 or UHS-I rating
• Capacity up to 64GB (FAT32)
Note:
1. Format the memory card before using the camera. To keep your memory card in
good condition, reformat it on a regular basis. Reformatting erases all your
content, so make sure to offload your photos and videos before reformatting.
2. FAT32 format memory card stops recording when the file size reaches 4GB and
starts to record again on a new file.
Powering On and Off
Press and hold the Power button for 3 seconds. The camera beeps while the camera
status light is on. When information appears on the screen, your camera is on. When
the camera is on, press and hold the Power button again to power off.
Switching Modes
Turn on the camera, press the Mode button to switch to video or photo mode.
Press and hold the OK button to enter the setting menu, choose the icon
and press the OK button again, there are more shooting modes available. Press the
Mode button to exit.
Turning On and Off Wifi
To turn on the camera, press and hold the Up button to turn on Wifi, the Wifi name
and password will appear on the screen. Press the Up button again to turn off Wifi.
EN
6
There are 8 different modes: Video, Slow Motion, Loop Recording, Time Lapse
Video, Photo, Auto Photo, Burst Photo, Self-Timer.
Video Mode
Your device is on the video mode - which is the default mode - when you turn on the
camera.
In Video Mode, press the Shutter button for the camera to start recording video.
Press the Shutter button again to stop recording video.
Slow Motion Mode
In Slow Motion Video mode, press the Shutter button, the camera records
slow-motion video.
Loop Recording Mode
Loop recording allows your camera to overwrite old files with new files. Once the
memory card becomes full, the camera will delete the first video file to make room
for the latest file. For example, if the setting for loop recording is "1 Minute", then
the camera will create video clips of 1 minute in length, and a 1-minute clip will be
deleted when the camera needs more memory.
Time Lapse Video Mode
In Time Lapse Video mode, press the Shutter button, the camera records video from
frames captured at specific intervals.
Photo Mode
In Photo Mode, press the Shutter button to take photos.
Auto Photo Mode
In Auto Photo Mode, press the Shutter button, the camera will automatically take
photos at specific intervals. Press the Shutter button again to stop.
OVERVIEW OF MODES
EN
7
Burst Photo Mode
In burst mode, several photographs are captured in quick succession, so it is perfect
for capturing fast-moving activities.
Self-Timer Mode
Self-Timer Mode gives a delay between pressing the shutter release and the
shutter's firing.
CUSTOMIZING YOUR VISION 4 LITE
Press and hold the OK button, choose the Setting icon to enter Setting Menu.
Press the Mode button to choose video setting, photo setting or system setting.
Press the Up or Down button to scroll through the options. Press OK to confirm and
press the Mode button to exit.
Video Settings
Resolution: 4K30fps/2.7K30fps/1080P60fps/1080P30fps/720P120fps/720P60fps/
720P30fps
Default setting is 4K30fps.
Note:
1. When capturing video at high resolutions or high frame rates in warm ambient
temperatures, the camera may become warm and use more power.
2. After turning on EIS (anti-shake), the video resolution of the recorded video will
automatically switch to 3200*1800 when the video resolution you set is 4K30fps.
EIS: Off/On
Default setting is On.
This setting adjusts the footage to offset for motion during capture. The result is
smoother footage, especially in relatively small but fast motion activities, including
cycling, motorcycling, and handheld uses.
Distortion Correction: On/Off
Default setting is On.
When the Distortion Calibration is on, it can correct the image distortion.
Note: 4K30fps resolution doesn't support Distortion Correction.
EN
8
White Balance: Auto/Sunny/Cloudy/Incandescent/Fluorescence
Default setting is Auto.
White Balance lets you adjust the color temperature of videos and photos to
optimize for cool or warm lighting conditions.
Exposure Setting: -3/-2/-1/0/1/2/3
Default setting is 0.
Exposure lets you select an area that you want the camera to prioritize when
determining exposure. This setting is particularly useful in shots where an important
region might otherwise be over- or underexposed.
Sharpness: High/Middle/Low
Default setting is Middle.
Video Quality: High/Middle/Low
Default setting is High.
ISO: Auto/100/200/400/800/1600/3200/6400
Default setting is Auto.
ISO determines the camera's sensitivity to light and creates a trade-off between
brightness and resulting image noise. Image noise refers to the degree of graininess
in the image. In low light, higher ISO values result in brighter images, but with greater
image noise. Lower values result in lower image noise but darker images.
Time Watermark: On/Off
Default setting is On.
Turn on this setting and this camera will add date stamp to the videos and photos
you take.
Record Audio: On/Off
Default setting is On.
Turn on this setting and this camera will record audio during recording a video.
Note: The camera does not record sound when it is in the waterproof case.
EN
Altri manuali per Vision 4 Lite
4
Indice
Lingue:
Altri manuali Dragon Touch Fotocamera d'azione
Dragon Touch
Dragon Touch Vision 4 Manuale utente
Dragon Touch
Dragon Touch Vision 4 Lite Manuale utente
Dragon Touch
Dragon Touch Vision 4 Lite Manuale utente
Dragon Touch
Dragon Touch Vista 5 Manuale utente
Dragon Touch
Dragon Touch Vision 2 Manuale utente
Dragon Touch
Dragon Touch Vision 3 Manuale utente
Dragon Touch
Dragon Touch Vision 2 Manuale utente
Dragon Touch
Dragon Touch Vision 5 Manuale utente
Dragon Touch
Dragon Touch Vision 3 Manuale utente
Dragon Touch
Dragon Touch Vision 3 Manuale utente
Dragon Touch
Dragon Touch Vision 4 Lite Manuale utente
Dragon Touch
Dragon Touch Vision 4 Manuale utente
Dragon Touch
Dragon Touch Vision 1 Manuale utente
Dragon Touch
Dragon Touch Vista 5 Manuale utente
Dragon Touch
Dragon Touch Vision 3 Manuale utente
Dragon Touch
Dragon Touch Vision 3 Manuale utente
Dragon Touch
Dragon Touch Vision 3 Pro Manuale utente
Dragon Touch
Dragon Touch Vision 4 Lite Manuale utente
Dragon Touch
Dragon Touch Vision 3 Pro Manuale utente
