Draytek Vigor2952 Series Manuale utente

Vigor2952 Series

Dual-WAN Security Firewall

Quick Start Guide

Version: 1.0

Firmware Version: V3.8.2_RC5

(For future update, please visit DrayTek web site)

Date: December 14, 2015

Intellectual Property Rights (IPR) Information

by copyright. No part may be reproduced, transmitted, transcribed, stored in

a retrieval system, or translated into any language without written permission

from the copyright holders.

Trademarks The following trademarks are used in this document:

Microsoft is a registered trademark of Microsoft Corp.

Windows, Windows 95, 98, Me, NT, 2000, XP, Vista, 7, 8 and

Explorer are trademarks of Microsoft Corp.

Apple and Mac OS are registered trademarks of Apple Inc.

Other products may be trademarks or registered trademarks of

their respective manufacturers.

Safety Instructions and Approval

Safety

Instructions

Read the installation guide thoroughly before you set up the router.

The router is a complicated electronic unit that may be repaired

only be authorized and qualified personnel. Do not try to open or

repair the router yourself.

Do not place the router in a damp or humid place, e.g. a bathroom.

Do not stack the routers.

The router should be used in a sheltered area, within a

temperature range of 0 to +45 Celsius.

Do not expose the router to direct sunlight or other heat sources.

The housing and electronic components may be damaged by direct

sunlight or heat sources.

Do not deploy the cable for LAN connection outdoor to prevent

electronic shock hazards.

Keep the package out of reach of children.

When you want to dispose of the router, please follow local

regulations on conservation of the environment.

Warranty

We warrant to the original end user (purchaser) that the router will be free

from any defects in workmanship or materials for a period of two (2) years

from the date of purchase from the dealer. Please keep your purchase receipt

in a safe place as it serves as proof of date of purchase. During the warranty

period, and upon proof of purchase, should the product have indications of

failure due to faulty workmanship and/or materials, we will, at our discretion,

repair or replace the defective products or components, without charge for

either parts or labor, to whatever extent we deem necessary tore-store the

product to proper operating condition. Any replacement will consist of a new

or re-manufactured functionally equivalent product of equal value, and will

be offered solely at our discretion. This warranty will not apply if the product

is modified, misused, tampered with, damaged by an act of God, or subjected

to abnormal working conditions. The warranty does not cover the bundled or

licensed software of other vendors. Defects which do not significantly affect

the usability of the product will not be covered by the warranty. We reserve

the right to revise the manual and online documentation and to make changes

from time to time in the contents hereof without obligation to notify any

person of such revision or changes.

European Community Declarations

Manufacturer: DrayTek Corp.

Address: No. 26, Fu Shing Road, HuKou Township, HsinChu Industrial Park, Hsin-Chu

County, Taiwan 303

Product: Vigor2952 Series

DrayTek Corp. declares that Vigor2952 Series of routers are in compliance with the following

essential requirements and other relevant provisions of R&TTE 1999/5/EC, ErP 2009/125/EC

and RoHS 2011/65/EU.

The product conforms to the requirements of Electro-Magnetic Compatibility (EMC) Directive

2004/108/EC by complying with the requirements set forth in EN55022/Class A and

EN55024/Class A.

The product conforms to the requirements of Low Voltage (LVD) Directive 2006/95/EC by

complying with the requirements set forth in EN60950-1.

This product is designed for 2.4GHz WLAN network throughout the EC region. Please see the user

manual for the applicable networks on your product.

Regulatory Information

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and

can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct the interference by one of

the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions:

(1) This device may not cause harmful interference, and

(2) This device may accept any interference received, including interference that may cause

undesired operation.

More update, please visit www.draytek.com.

iii

Be a Registered Owner

Web registration is preferred. You can register your Vigor router via http://www.draytek.com.

Firmware & Tools Updates

Due to the continuous evolution of DrayTek technology, all routers will be regularly upgraded.

Please consult the DrayTek web site for more information on newest firmware, tools and

documents.

http://www.draytek.com

1. Introduction........................................................................................................... 1

2. Package Content .................................................................................................. 2

3. Panel Explanation................................................................................................. 3

4. Hardware Installation ........................................................................................... 5

5. Software Configuration........................................................................................ 6

6. Customer Service................................................................................................11

Vigor2952 is a broadband router with dual-WAN interface. It provides

policy-based load-balance, fail-over and BoD (Bandwidth on Demand), also it

integrates IP layer QoS, NAT session/bandwidth management to help users

control works well with large bandwidth.

By adopting hardware-based VPN platform, hardware encryption of AES/DES/3DS

and hardware key hash of SHA-1/MD5, the router increases the performance of

VPN greatly, and offers several protocols (such as IPSec/PPTP/L2TP) with up to

100 VPN tunnels.

The object-originated design used in SPI (Stateful Packet Inspection) firewall

allows users to set firewall policy with ease. CSM (Content Security Management)

provides users control and management in IM (Instant Messenger) and P2P (Peer

to Peer) more efficiency than before. By the way, DoS/DDoS prevention and

URL/Web content filter strengthen the security outside and control inside.

Vigor2952 series supports USB interface for connecting USB printer to share

printing function, 3G/4G USB modem for network connection, or connectivity for

network FTP service.

Take a look at the package content. If there is anything missed or damaged,

please contact DrayTek or dealer immediately.

Vigor Router

Quick Start Guide

RJ-45 Cat-5 Ethernet Cable

Antenna (for “n” model)

The type of the power adapter depends on the country that the router will be

installed. * The maximum power consumption is 17-23 Watt.

UK-type Power Cord

EU-type Power Cord

USA/Taiwan-type Power Cord

AU/NZ-type Power Cord

LED Status Explanation

Blinking The router is powered on and running normally.ACT

(Activity) Off The router is powered off.

On A USB device is connected and active.USB1~USB2 Blinking The data is transmitting.

On No fiber line connected.SFP Off File line connected.

On The WAN connection is ready.WAN1~WAN2 Blinking It will blink while transmitting data.

QoS On The QoS function is active.

On Wireless access point is ready.

Blinking Ethernet packets are transmitting over wireless LAN.

WLAN

Off The WLAN function is inactive.

CSM On The profile of CSM (Content Security Management) for

IM/P2P application is enabled from Firewall >> General

Setup. (Such profile is established under CSM menu).

On VPN tunnel is up and down.

Off VPN services are disabled.

VPN

Blinking Traffic is passing through VPN tunnel.

LED on Connector On The port is connected.

Off The port is disconnected.

Left LED

(Green) Blinking The data is transmitting through WAN1 or

Fiber WAN.

On The WAN1/Fiber port is connected with

1000Mbps.

WAN1

Fiber WAN

Right LED

(Green) Off The WAN1/Fiber port is connected with

10/100Mbps.

On The port is connected.

Off The port is disconnected.

Left LED

(Green) Blinking The data is transmitting.

On The port is connected with 1000Mbps.

WAN2

Right LED

(Green) Off The port is connected with 10/100Mbps.

On The port is connected.LAN1~LAN4 Left LED

(Green) Off The port is disconnected.

Blinking The data is transmitting.

On The port is connected with 1000Mbps.Right LED

(Green) Off The port is connected with 10/100Mbps.

Interface Description

Factory Reset Restore the default settings.

Usage: Turn on the router (ACT LED is blinking). Press the hole and

keep for more than 5 seconds. When you see the ACT LED begins to

blink rapidly than usual, release the button. Then the router will

restart with the factory default configuration.

Wireless LAN

ON/OFF/WPS WLAN On - Press the button and release it within 2 seconds. When

the wireless function is ready, the green LED will be on.

WLAN Off - Press the button and release it within 2 seconds to turn

off the WLAN function. When the wireless function is not ready, the

LED will be off.

WPS - When WPS function is enabled by web user interface, press

this button for morethan2 seconds to wait for client’s device making

network connection through WPS.

Fiber Connector for accessing the Internet.

WAN1~WAN2 Connector for remote networked devices.

LAN1~LAN4 Connectors for local networked devices.

USB1~USB2 Connector for a USB device (for 3G/4G USB Modem or printer).

PWR Connector for a power cord.

ON/OFF Power Switch.

Note

Vigor router will use either Fiber WAN or WAN1 for Internet connection. If

both Fiber WAN and WAN1 are connected at the same time, Fiber WAN will

be the first choice.

This section will guide you to install the router through hardware connection and

configure the router’s settings through web browser.

Before starting to configure the router (taking Vigor2952n for example), you

have to connect your devices correctly.

1. Connect a cable Modem/DSL Modem/Media Converter (depends on your

requirement) to any WAN port of router with Ethernet cable (RJ-45). Or,

connect the fiber cable to the WAN (SFP) port of router.

2. Connect one end of an Ethernet cable (RJ-45) to one of the LAN ports of the

router and the other end of the cable (RJ-45) into the Ethernet port on your

computer (that device also can connect to other computers to form a small

area network).

3. Connect the power cord to the router’s power port on the rear panel, and

the other side into a wall outlet.

4. Power on the device by pressing down the power switch on the rear panel.

5. The system starts to initiate. After completing the system test, the ACT LED

will light up and start blinking. The WAN1/WAN2/LAN connector LED (Left

or Right) will light up according to the network card feature (1000 or 100) of

the device that it connected.

If Fiber connection is used, check if SFP LED lights up or not.

(For the detailed information of LED status, please refer to section 3. Panel

Explanation)

Altri manuali per Vigor2952 Series

Indice

Altri manuali Draytek Router di rete

Draytek

Draytek Vigor2133 Vac Manuale utente

Draytek

Draytek VigorLTE 200 Series Manuale utente

Draytek

Draytek VigorFly 210 Manuale utente

Draytek

Draytek Vigor 2104 Manuale utente

Draytek

Draytek Vigor1000 Series Manuale utente

Draytek

Draytek Vigor 2750 Series Manuale utente

Draytek

Draytek Vigor2927 Series Manuale utente

Draytek

Draytek Vigor2130 Series Manuale utente

Draytek

Draytek Vigor 2800 Manuale utente

Draytek

Draytek Vigor2920 Series Manuale utente

Draytek

Draytek Vigor2760 Manuale utente

Draytek

Draytek Vigor 2700 Series Manuale utente

Draytek

Draytek Vigor 3100 Series Manuale utente

Draytek

Draytek Vigor2765 Series Manuale utente

Draytek

Draytek Vigor2760Vn Manuale utente

Draytek

Draytek Vigor2915 Series Manuale utente

Draytek

Draytek Vigor2760 Manuale utente

Draytek

Draytek Vigor IPPBX 2820 Manuale utente

Draytek

Draytek Vigor 2800 Guida di riferimento

Draytek

Draytek Vigor1000B Manuale utente

Draytek

Draytek VIGOR3220 SERIES Manuale utente

Draytek

Draytek Vigor2135 Series Manuale utente

Draytek

Draytek Vigor2762 series Manuale utente

Draytek

Draytek Vigor 2927 Series Manuale utente

Manuali Router di rete popolari di altre marche

Allnet

Allnet ALL0333AU Manuale utente

HomeSeer

HomeSeer HT-SEL Manuale utente

Sercomm

Sercomm Genesis OC3505D Manuale utente

Billion

Billion BIPAC 5102 Series Manuale utente

TP-Link

TP-Link TD-8817 Manuale utente

Motorola

Motorola MR1900 Manuale utente

Digi

Digi IX14 Manuale utente

Cisco

Cisco NCS 540 Manuale

XAVi

XAVi X8821e Manuale utente

BEC

BEC 6200WZL Manuale utente

MikroTik

MikroTik hAP ac3 Series Manuale utente

Korenix

Korenix JetNet 5428G Series Manuale utente

NETGEAR

NETGEAR FS526T - Switch Manuale utente

Korenix

Korenix JetNet 5710G Series Manuale utente

Automated Logic

Automated Logic ZN551 Manuale del proprietario

Cisco

Cisco ASR 1000 Series Manuale dell'operatore

EnGenius

EnGenius ESR-9710 Manuale utente

Cisco

Cisco 805 Series Istruzioni operative e di sicurezza