Drayton 22083 Manuale utente

Drayton

Programmable Room

Thermostat

7Day (5-2 Day)

Models:

22083 / 22087

Po er Supply:

Battery / Mains

Invensys Controls Europe

Technical Helpline: +44 (0) 845 130 7722

.draytoncontrols.co.uk

Installati n / User Guide 06490044001 (0905)

User Guide

Your Digistat+3 programmable room

thermostat. (7 day (5-2 Day)

Digistat+3 pr grammable r m therm stat all ws y u t set

time and temperature peri ds (up t 6 per day) t suit y ur wn

lifestyle. Once fully installed and p wered the Digistat+3 will

aut matically set the c rrect time and in aut m de will c ntr l

y ur heating system acc rding t pre-set pr gram 1 (9 till 5).

The temperature is c ntr lled by sensing air temperature,

switching n the heating when the air temperature falls bel w

the therm stat setting and switching it ff nce this set

temperature has been reached.

(

Ho to change the temperature for a short time (Override).

When in Aut m de y u can verride the existing temperature

setting by pressing + r -. During adjustment the temperature will

flash then st p. The Digistat+3 will n w c ntr l at this

temperature until the next pr grammed time/temperature event is

reached, when the Digistat+3 will revert back t Aut m de.

Whilst in temperature verride the p inter indicates b th Man and

Aut . T exit verride press > t return t Aut . (Fig 1) sh ws

Digistat+3 in verride.

Ho to set a constant room temperature (Manual mode).

Manual m de will all w y u t set a temperature, ver-riding all

pr grams, until y u exit manual m de. In this m de all pre-set

time temperature events will be disabled.

T enter manual m de press < until the p inter indicates MAN

(Fig 2). The screen will nly sh w the temperature, which can be

adjusted by pressing + r -.

Once y u have set the temperature it will flash f r 5 sec nds and

then st p. The Digistat+3 will n w c ntr l at this temperature until

y u adjust using + r - r exit by pressing > t enter Aut m de.

(Fig 1) (Fig 2)

Ho to set my room temperature for my holiday period.

(Holiday Mode)

When g ing n h liday y u can l wer the temperature f y ur

h me f r the durati n f y ur h liday, but set Digistat+3 t

return t y ur n rmal pr gramming ready f r y ur return.

H liday m de w rks by c unting d wn the days r h ur until

y ur return.

Time peri ds f between 1 t 24hr then 1 day t 199 days can

be set.

Example

I am ready to leave for my 2 week (14 day) holiday and would like

the house temperature held at a constant 1 . ºC during this time

and on my return the house temperature will be already running

at my normal pre-set temperature.

y p p

T enter H liday m de press the < butt n until the p inter is

indicating HOL (fig 3). The temperature will flash and by pressing

the + r - butt ns y u can change t the temperature required (

in this example t 10.0 ºC) (Fig 3a).

Then press < again t set the time peri d.(in this example 14

days) using the + r - butt ns. (it w uld be advisable in this

example t set the time peri d 1 day less (13 days) t ensure the

h use temperature is back t n rmal n y ur return). (Fig 3b)

Once y u have set y ur time peri d the time will flash f r 10

sec nds and then start the h liday peri d. T exit the H liday

m de press either < r > t return t aut m de.

When changing time the display will scr ll thr ugh Hr (H urs)

1-24 then d (Days) 1-99.

The display will sh w h liday time peri d and set temperature.

(Fig 3) (Fig 3a)

(Fig 3b)

(Fig 4) (Fig 5)

Battery Model only.

Ho do I kno hen to change the batteries.

When the batteries start t run l w a battery ic n will blink f r

15 sec nds every 15 sec nds t indicate “l w battery” during

this time the Digistat+3 will functi n n rmally (see fig 4).

Please replace batteries with (2 x AA 1.5V Alkaline batteries).

After 6 m nths the Digistat+3 will cease t functi n and will

permanently display the battery ic n and n thing else, sh wn in

(fig 5).

(

(Fig 6)

(

Ho to change the time, day, month & year.

Digistat+3 c mes with a pre-set cl ck, which als aut matically

adjusts f r summer/winter time changes. It is activated

aut matically n 1st installati n. There sh uld be n need t

change these settings, h wever, sh uld y u wish t , it can be

d ne in cl ck m de.

T enter cl ck m de press > t select Day. Select Sunday. Use >

t m ve thr ugh all 6 time/temperature events until the arr w

p ints t the cl ck symb l. The time will n w flash and can be

adjusted (Fig 7) by pressing + r - then press > t accept and

m ve t Day.

Change day. (Fig 8).

If y u wish t change the day press + r - then press > t accept.

Digistat+3 will m ve t the next field - m nth.

Change month. (Fig 9).

If y u wish t change the m nth press + r - then press > t

accept. Digistat+3 will m ve t the next field - Year.

Change year. (Fig 10).

If y u wish t change the year press + r -, then press > t

accept. Digistat+3 will n w return t Aut m de.

Ho to replace the batteries see fig 6.

Rem ve the battery c ver using a c in. Replace the spent

batteries with 2 x AA 1.5V alkaline batteries ensuring c rrect

rientati n. Replace the battery c ver pressing fully h me.

(Fig 8)(Fig 7)

(Fig 10)(Fig 9)

Display Error code E1 or E2.

When the display sh ws E1 r E2 this indicates a sens r fault and

y ur heating system will remain Off. Please c ntact y ur installer.

Ho to select another pre-set time/temperature program.

There are 3 pre-set time/temperature pr grams already held in

mem ry as sh wn, if pre-set pr gram 1 is the best pr gram t

suit y ur lifestyle d n thing and the Digistat+3 will c ntr l t

pr gram 1.

If y u w uld like t select ne f the ther pre-set pr grams,

refer t ‘H w t change User Opti ns’, Opti n 3 and select y ur

preferred pr gram.

User Guide – continued

(Fig 11) (Fig 12) (Fig 13)

Pre-set programs for Digistat+3 7 day 5-2day.

Program 1 (9 till 5) as sho n belo

M nday t Friday

Events 1 2 3 4 5 6

Time 6:30 8:30 12:00 14:00 16:30 22:30

Temperature C 20.0 16.0 16.0 16.0 21.0 7.0

Saturday and Sunday

Events 1 2 3 4 5 6

Time 7:00 9:00 12:00 14:00 16:00 23:00

Temperature C 20.0 18.0 21.0 18.0 21.0 7.0

Program 2 (Home for lunch)

M nday t Friday

Events 1 2 3 4 5 6

Time 6:30 8:30 12:00 14:00 16:30 22:30

Temperature C 21.0 16.0 21.0 16.0 21.0 10.0

Saturday and Sunday

Events 1 2 3 4 5 6

Time 7:00 9:00 12:00 14:00 16:30 23:00

Temperature C 21.0 18.0 21.0 18.0 21.0 10.0

Program 3 (Home orker)

M nday t Friday

Events 1 2 3 4 5 6

Time 6:00 8:30 12:00 14:00 17:30 22:30

Temperature C 21.0 19.0 21.0 19.0 21.0 16.0

Saturday and Sunday

Events 1 2 3 4 5 6

Time 7:00 9:00 12:00 14:00 16:30 23:00

Temperature C 21.0 18.0 21.0 18.0 21.0 16.0

Ho to change the pre-set time/temperature program to my

o n selection.

Press > t select the day functi n. N w press + t select the day

r days y u wish t change. The days can be selected as bl cks r

as individual days (figs 11 t 13).

Fig 11 sh wing M nday t Friday as ne bl ck.

Fig 12 sh wing Saturday and Sunday as ne bl ck.

Fig 13 sh wing M nday thr ugh t Sunday as individual days.

(Fig 14) (Fig 14a)

(Fig 15) (Fig 15a)

Once y u have selected the required day r days, press > t

view the existing time/temperature event (1). (Fig 14) time will

flash. Press > again t view the temperature setting, temperature

will flash. Press > again t view the sec nd time temperature

event (Fig 14a).

When y u get t the event y u wish t change press + r - t

change the required time, then Press > t accept. Use + r - t

select the required temperature, then > t accept. Digistat+3

will n w sh w the next time/temperature event. T exit press <

r > until y u return t Aut m de. If y u c ntinue t press > it

will display all the time/temperature events and m ve t the

next day, finally g ing t aut .

Ho to change User Options.

If y u wish t change any user pti ns 1 t 8 sh wn in table 1

they can be accessed fr m Aut r Man by pressing < and >

simultane usly f r 3 sec nds. Once y u have accessed the user

setting Menu (Fig 15) press > t scr ll thr ugh selectable

pti ns 1 t 8. The settings f r each pti n can be changed by

pressing + r - as required. Press > t accept the change and

m ve t the next pti n. T exit press < and > simultae usly f r

3 sec nds. Alternatively, n t pressing any butt ns f r 2 mins will

cause the Digistat+3 t return t Aut . (Fig 15a) sh ws pti n 1

24 (24 h ur cl ck).

Only selected pti ns which have been accepted by pressing >

will be changed.

Ho to change from 24hr to 12hr clock (Option 1).

Enter user pti ns, select pti n 1 and use + and – keys t select

desired pti n, 12 = 12hr and 24 = 24hr. Press > t accept change.

Ho to change the default manual set-point temperature

(Option 2).

Enter user pti ns, select pti n 2 and use + and – keys t set

desired temperature. Press > t accept desired change.

Ho to change to another predefined program 1, 2 or 3

(Option 3).

Enter user pti ns, select pti n 3 and use + and – keys t select

desired pr gram 1, 2 r 3. 1 = pr gram 1, 2 = pr gram 2 and

3 = pr gram 3. Press > t accept desired change.

Ho to change the number of program events per day

(Option 4).

Enter user pti ns, select pti n 4 and use + and – keys t select

desired pti n. 2 = 2 time / temp events per day, 4 = 4 time /

temp events per day and 6 = 6 time / temp events per day. Press

> t accept desired change.

Ho to s itch on/off the automatic summer / inter time

change (Option 5).

Twice a year the actual time is aut matically changed t keep it in

line with the summer / winter time change. Default setting is On.

If y u wish t disable / enable this feature enter user pti ns,

select pti n 5 and press – r + key t display Off r On as

desired. Press > t accept desired change.

User

options What is it Min Max Default

1 Change 12h r 24h cl ck 12 24 24

2 Change the manual set

p int temperature

0C 32 0C 20

3 Change t an ther

pre-set pr gramme 1 3 1

4 Change the number f

pr gramme events per day 2, 4 r 6 6

5 Switch n/ ff aut matic

summer/winter time change On Off On

6 Change temperature ffset

C-5 5 0

7 Rest re pre-set pr gramme On Off Off

8 T enable Off functi n On Off Off

(Table 1)

Ho to change temperature offset (Option 6).

The temperature displayed n the therm stat may n t match

that f ther temperature measuring devices in the c ntr lled

space, because f its l cati n. The displayed and set

temperature may be ffset t bring it in line with ther devices.

T adjust the temperature, enter the user pti ns, select pti n

6. The temperature may be ffset by +/- 5 degrees by pressing

the + and – keys. Press > t accept the desired change.

Ho to restore the built in time temperature programs

(Option 7).

Enter user pti ns, select pti n 7 and use + and – keys t

select desired pti n. Off = current pr grams retained. On =

rest re fact ry pr gram settings. Press > t select the desired

change. Please note enabling this function will lose any user

changes to the preset programs.

Ho to s itch the Digistat+3 and heating system off

(Option 8).

T switch the Digistat+3 and the heating system ff y u need t

enable the Off functi n. Enter user pti ns, select pti n 8 and

use + r – keys t select On t enable the Off functi n .The

therm stat and heating system will n w be Off unless the

temperature in the c ntr lled space falls bel w 7 C the fr st

pr tecti n set-p int. The LCD will display Off and r m

temperature nly and the keys will n t functi n. T switch On

the Digistat+3 enter user pti ns select pti n 8 and use + r –

keys t select Off t disable the Off functi n. The therm stat

will n w regulate the heating system in line with the currently

selected pr gram. Please n te this d es n t effect the perati n

f d mestic h t water where pr vided.

Altri manuali per 22083

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Drayton Termostato

Drayton

Drayton RF710 Manuale di istruzioni

Drayton

Drayton 13616 Manuale utente

Drayton

Drayton Digistat +2 Manuale utente

Drayton

Drayton MiStat N110R Manuale utente

Drayton

Drayton MiStat P710R Manuale utente

Drayton

Drayton Digistat 1 Manuale utente

Drayton

Drayton Digistat 2 Manuale utente

Drayton

Drayton 30002 Manuale utente

Drayton

Drayton Digistat+ 2 22084 Manuale utente

Drayton

Drayton Lifestyle Guida

Drayton

Drayton HTS3 Manuale utente

Drayton

Drayton 22083 Manuale utente

Drayton

Drayton MiStat P710R Manuale utente

Drayton

Drayton RF700/22090 Manuale utente

Drayton

Drayton 30002 Manuale utente

Drayton

Drayton LP10RF Manuale operativo

Drayton

Drayton 13616 Manuale utente

Drayton

Drayton RTS1 Manuale utente

Drayton

Drayton Digistat+2 22084 Manuale utente

Drayton

Drayton Digistat RF3 Manuale utente

Drayton

Drayton Digistat+1 RF710 Manuale utente

Drayton

Drayton Wiser Thermostat Kit 1 Manuale utente

Drayton

Drayton Combi-Stat RTS8 Manuale utente

Drayton

Drayton Digistat+3 22083 Manuale utente

Manuali Termostato popolari di altre marche

EWELLY

EWELLY EW-181 Manuale utente

Prolon

Prolon T1100 Istruzioni per l'installazione

Computherm

Computherm Q20 Manuale utente

Heatmiser

Heatmiser neoStat Manuale utente

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Manuale utente

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Manuale utente

Saswell

Saswell SAS920XWHB-7-S-RF Guida

Aircalo

Aircalo TFP1-ET85P2 Manuale utente

Honeywell

Honeywell CM721 Manuale utente

Carrier

Carrier DEBONAIR 33CS Manuale utente

Lennox

Lennox iHarmony Zone Thermostat Istruzioni per il montaggio

Gemtech

Gemtech GT7000 Manuale di istruzioni

Rollei

Rollei Smartes 45000 Manuale utente

Sinope

Sinope TH1300RF Manuale utente

Honeywell

Honeywell RLV4305 Manuale utente

Honeywell

Honeywell Prestige 2.0 THX9421 Manuale utente

NuTone

NuTone NTBZ48 Istruzioni operative originali

Stelpro

Stelpro MAESTRO ASMT402AD Manuale utente