DSC PC5964 Manuale utente

Indice

Altri manuali DSC Sistema di sicurezza

Manuali Sistema di sicurezza popolari di altre marche

Inner Range

Inner Range Concept 2000 Manuale utente

Climax

Climax Mobile Lite R32 Istruzioni per il montaggio

CADDX

CADDX NX-6 Manuale utente

FBII

FBII XL-31 Series Manuale utente

Johnson Controls

Johnson Controls PENN Connected PC10 Manuale utente

Aeotec

Aeotec Siren Gen5 Manuale utente

Blaupunkt

Blaupunkt SA 2700 Manuale utente

IDEAL

IDEAL Accenta Manuale del proprietario

AJAX

AJAX DoubleButton Manuale utente

Swann

Swann SW-P-MC2 Manuale utente

Ecolink

Ecolink Siren+Chime Manuale utente

Digital Monitoring Products

Digital Monitoring Products XR150 Manuale utente

EDM

EDM Solution 6+6 Wireless-AE Manuale utente

Highway Safety Group

Highway Safety Group EA401 Manuale utente

Siren

Siren LED GSM Manuale utente

Detection Systems

Detection Systems 7090i Istruzioni per il montaggio

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuale utente

Siemens

Siemens FDM273 Manuale utente

This instruction sheet shall be used in conjunction with the associated Audio Module Installation Manual.

Mounting Instructions

1. If required, remove the front cover from the backplate as follows:

a. Insert a small slotted screw driver in one of the slots indicated in Fig 1.

b. Gently pry the cover from the backplate.

c. Repeat this operation on the remaining slot. Lift cover free of backplate.

2. Determine the desired location and mounting method (A, B, C or D surface-mount)

3. (a) For A, B or C (Fig. 2) mounting methods, position the backplate over the electrical box

ensuring free access to wiring. Then mark the screw locations indicated for the chosen

mounting method.

(b) For D mounting (surface mount) remove the wiring access flange on the side of the back-

plate. Position the backplate in the desired location then mark the screw locations at the 4

corners of the backplate.

CAUTION!: DSC recommends the use of wall anchors when mounting directly onto a wall.

4. Route wiring as required.

5. Secure backplate to wall using the appropriate hardware.

6. Wire unit in accordance with the associated Audio Module instructions.

7. Place front cover over backplate. Gently press until cover locks in place with an audible click.

8. Power up system then verify operation.

PC5964 Audio Station Mounting Instructions

2. Push down to open

3. Repeat steps 1

and 2 for this side.

1. Insert

screwdriver

Figure 1

A

A

AA

C

C

B

B

D

DD

D

A- Single/Double

Gang Box

B- Octagonal Box

C- European Wall/

Ceiling Box

Wiring Flange

Figure 2

©2007 Digital Security Controls, Toronto, Canada

www.dsc.com • 1-800-387-3630 (Canada, US), 905-760-3036

Printed in Canada

29007411R002

This instruction sheet shall be used in conjunction with the associated Audio Module Installation Manual.

Mounting Instructions

1. If required, remove the front cover from the backplate as follows:

a. Insert a small slotted screw driver in one of the slots indicated in Fig 1.

b. Gently pry the cover from the backplate.

c. Repeat this operation on the remaining slot. Lift cover free of backplate.

2. Determine the desired location and mounting method (A, B, C or D surface-mount)

3. (a) For A, B or C (Fig. 2) mounting methods, position the backplate over the electrical box

ensuring free access to wiring. Then mark the screw locations indicated for the chosen

mounting method.

(b) For D mounting (surface mount) remove the wiring access flange on the side of the back-

plate. Position the backplate in the desired location then mark the screw locations at the 4

corners of the backplate.

CAUTION!: DSC recommends the use of wall anchors when mounting directly onto a wall.

4. Route wiring as required.

5. Secure backplate to wall using the appropriate hardware.

6. Wire unit in accordance with the associated Audio Module instructions.

7. Place front cover over backplate. Gently press until cover locks in place with an audible click.

8. Power up system then verify operation.

PC5964 Audio Station Mounting Instructions

2. Push down to open

3. Repeat steps 1

and 2 for this side.

1. Insert

screwdriver

Figure 1

A

A

AA

C

C

B

B

D

DD

D

A- Single/Double

Gang Box

B- Octagonal Box

C- European Wall/

Ceiling Box

Wiring Flange

Figure 2

©2007 Digital Security Controls, Toronto, Canada

www.dsc.com • 1-800-387-3630 (Canada, US), 905-760-3036

Printed in Canada

29007411R002