DSPPA MAG-808 Manuale utente
MAG808 - V0.3
Facture 2017-07-26
About the Instructions
The Instructions is used at the date when the digital audio matrix MAG808 device is developed. It
contains system introduction, operation attentions, system connection instructions, product instructions
and other contents of the digital audio matrix MAG808 device. The user shall read the Instructions
carefully and operate the device following the indications in the Instructions before the installation and
operation of the device.
Any symbol marked on the rear panel of this machine must be noted. The operations must be
performed according to the instructions of these symbols.
Please keep the Instructions for future reference!
WARNING
Be sure to observe the following cautions to prevent the damage to the users and others, and the
damage to the equipment or property!
This symbol means a “prohibition”. This symbol means a “must”.
Check the damage condition of power cord.
Do not pulling the power cord to unplug the plug,
unplug the plug directly; otherwise it may cause
electric shock, short circuit or fire.
Do not block the air vent during the operation.
All air vents must be unblocked to avoid the
overheating.
Do not expose the device to dust, vibration,
extreme cold and hot environment.
Do not place heavy objects on the device. Do not
impose an excessive force when operating the
switch, buttons or connecting the external audio
equipment.
Avoid any foreign matter (paper, metal, etc.)
from entering the device through gap or opening.
In such a case, please power off this device
immediately.
Do not attempt to detach the internal parts of this
device or remold it by any way.
Please unplug the power plug immediately to
avoid the electric shock, fire or other accident and
professionals shall be invited for maintenance of
the device in case of any sudden sound
interruption, any abnormal smell or smoke during
the running of the machine.
Smell of Scorching
Be sure to unplug the AC power cord or turn off
the wall outlet to achieve zero energy consumption
when this device will not be operated for a long time.
* * CONTENTS
CONTENTS
A. PRODUCT DESCRIPTION .................................................................................................................................1
1.1 PERFORMANCE ................................................................................................................................................1
B. APPEARANCE DESCRIPTION ..........................................................................................................................2
2.1 DESCRIPTION OF FRONT PANEL..................................................................................................................2
2.2 DESCRIPTION OF REAR PANEL.....................................................................................................................3
C. INSTALLATION INSTRUCTION.......................................................................................................................5
3.1 INSTALLATION IN PHONE..............................................................................................................................5
3.2 INSTALLATION IN PC.......................................................................................................................................5
D. OPERATING GUIDE ...........................................................................................................................................5
4.1 LINKAGE INSTRUCTION.................................................................................................................................5
4.1.1 PHONE.....................................................................................................................................................................5
4.1.2 PC...........................................................................................................................................................................6
4.2 INTERFACE INSTRUCTION ............................................................................................................................7
4.2.1 DESCRIPTION OF MAIN INTERFACE .........................................................................................................................7
4.2.2 DESCRIPTION OF PHONE INTERFACE......................................................................................................................14
4.2.3 DESCRIPTION OF PC INTERFACE............................................................................................................................19
PACKING LIST.......................................................................................................................................................26
SPECIFICATION....................................................................................................................................................26
* * Digital Audio Matrix
1
A. Product Description
1.1 Performance
7″with touch capacitive color screen, embedded operating system;
Built-in high performance DSP, 10M/100M/1000M Ethernet interface;
Integrated Digital Audio Matrix, display, intelligent timing control, zones control and other functions in PA
system;
8-channel zones output independent control and each channel with individual icon equalizer and individual
volume control;
Each channel can be linked independently with control panel and remote volume control of sound source
with voice, wiring and MP3 player;
8-channel normal sound source balanced input and each channel with individual icon equalizer and
individual volume control;
2-channel local microphone input(with phantom power options) and each channel with individual icon
equalizer and individual volume control;
1-channel MP3 display(built-in program or extrapolated U disk) with individual icon equalizer and
individual volume control;
1-channel FM with individual icon equalizer and individual volume control;
1-channel fixed telephone input(with authority management), only one line can be operated in the whole area
and with individual volume control;
1-channel chime with individual volume control;
1-channel voice alarm(a key alarm), can be replaced alarm contents as needed;
4-channel remote paging microphone, parallel paging with priority control and individual icon equalizer and
individual volume control;
1-channel fire emergency analog signal input;
8-channel independent zones fire emergency trigger input(short circuit signal), 1-channel whole area fire
emergency trigger input(short circuit signal), 1-channel fire linkage output (short circuit signal);
Support PC/Android LAN remote control;
Zones and sound source physical shortcuts, easy to use;
Built-in zones monitoring;
Built-in 8G storage and maximum support 32G;
SupportAC220(or 110V) & 24V DC power supply.
* * Digital Audio Matrix
2
B. Appearance Description
2.1 Description of Front Panel
ALL ON ALL OFF
PAGE ALL BGM EMERGENCY CHIME
MASTER V+ MASTER V-
ZONE1 ZONE2 ZONE3 ZONE4
ZONE5 ZONE6 ZONE7 ZONE8
USB
POWER
1 2 34567
12 11 10 9 8
MAG808 Digital Audio Matrix
1. 1-8 zones button and indicator
2. Display/Touch Screen
The display shows dynamically all information of the system and it is also the touch screen for operation.
3. Page all button and indicator
4. Background source button and indicator
5. Full emergency button and indicator
It can send the warning signals to all zones simultaneously by pressing the full-warning button of the system,
and meanwhile, the indicator light is ON.
6. Chime and indicator
7. Power
8. USB
Use to connect the U disk with MPS programs, mobile hard disk and other memory devices. It can directly
play the songs of the U disk and copy the programs for built-in MP3 player.
9. All-page close and indicator
10. All-page open and indicator
11. Volume control -
12. It controls the volume of zones. Press this button to turn down the volume
It controls the volume of zones. Press this button to turn up the volume
* * Digital Audio Matrix
3
2.2 Description of Rear Panel
WP1WP2WP3WP4WP5WP6WP7WP8
PAGE1 PAGE2 PAGE3 PAGE4
LINE INPUT
+-G+-G+-G
+-G+-G+-G+-G
1 2 3456+-G+-G
78
PHANTOM
MIC
MIC 1 MIC 2
MIC INPUT
TEST
DC POWER INPUT
GND.+24VDC
EMERGENCY
EVAC_IN
ALERT_IN
GND
RESERVE
RESERVE
1G
CONTACT CLOSURE
FIRE ALARM TEST
NET
MODEL: MAG808
VOLTAGE SELECTOR
~110V/50Hz F4AL
~220V/50Hz F2AL
110V 220V
TEL
USB
ZONE OUTPUT
+-G
+-G+-G+-G+-G+-G+-G
345678
+-G
+-G
2
+-G
+-G
1
FM
~110V/220V 50Hz
F4AL
23 4 5 6 7 8
RESERVE
VOL
PHANTOM
MIC
VOL
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION!
MP3
VOL
EMC_IN-
EMC_IN+
RESERVE
230
12
13
14
15
16
17
18
12345678910 11
①AC 110V/220V Selector Switch
Use to select the operating voltage.
②AC Power Input Socket
Plug theAC power cord into this socket.
③DC 24V connection terminal
Externally connect with DC 24V power supply.
④DC 24V Fuse
Use for the fixed DC power supply. If it is fused, please replace it with the fuse of the same specification. A
continuous fusing indicates that there are some faults.
⑤MP3 volume control knob
⑥FMAntenna Interface
⑦zones Output
Connect with the power amplifier.
⑧Network Interface
It is used to connect the LAN, through which the remote control of the system is performed.
⑨Alarm Signal Input
Input the signals from the fire control center.
⑩Alarm Signal Input
⑪Testing Interface
It is used for testing.
* * Digital Audio Matrix
4
⑫Telephone Interface
It is used to connect the telecom signals to this machine.
⑬USB
It is used to update the applications.
⑭MIC2 Input Interface
⑮+48V Phantom Power Control Switch (MIC1-MIC2)
MIC1 and MIC2 are individually controlled. Turn left the switch to open this power source when the +48V
phantom power supply microphone is used.
⑯Volume Control Knob
⑰Line Input Interface
⑱As shown below:
WP1WP2WP3WP4WP5WP6WP7WP8
PAGE1 PAGE2 PAGE3 PAGE4
2
1
3
TEST
①Control panel interface
Connect 8 sets MAG808C/MAG808S control panels.
②Extension interface
③Connect 4 MAG808R paging microphones
* * Digital Audio Matrix
5
C. Installation Instruction
3.1 Installation in phone
Double-click to install the APP, according to the instructions to install.
3.2 Installation in PC
Click the software to open the software page.
D. Operating Guide
4.1 Linkage Instruction
4.1.1 Phone
1. First connect the MAG808 host device;
2. Connect the host device to LAN;
3. Connect the desired Android phone to the WIFI in the LAN where the host device is connected and set the
static IP address of the phone. The static IP address should be in the same network segment with the IP address of
the host device (e.g the host device IP is: 192.168.8.220, the static IP address of the phone should
be :192.168.8.100.):As shown below:
4. Enter the software connection interface and input the host's IP address and port number. As shown below:
* * Digital Audio Matrix
6
4.1.2 PC
1. First connect the MAG808 host device;
2. Connect the host device and PC to LAN;
3. Set the IP address of PC and host device in the same network segment (e.g the host device IP is:192.168.0.220,
the PC IP should be 192.168.0.10.): As shown below:
4. Enter the software connection interface and input the host’s IP address and port number. As shown below:
Altri manuali per MAG-808
1
Indice
Altri manuali DSPPA Impianto stereo
