DT Research DT361DM Istruzioni per il montaggio
Rugged Tablet
signage dtri com
DT Research, Inc.
2000 Concourse Drive, San Jose, CA 95131
Copyright © 2023, DT Research, Inc. All Rights Reserved. BOG092022 DT361DM ENG
INTRODUCTION
Thank you for acquiring the DT361DM, part of DT Research’s line of Rugged tablets.
Featuring a slim yet robust enclosure, the DT361DM with 6” Capacive touch screen
is powered by the Intel® processor, oering opmal combinaons of performance
and power savings. The DT361DM is available with Microso® Windows® operang
system and features web browser, client/ server compung soware, media player,
accessories, and applicaons support.
PACKAGE CONTENTS
• One DT361DM with Baery Pack and Handstrap
• AC-DC Power Adapter with Power Cord
• Basic Operaon Guide
DT361DM
Federal Communication Commission Interference
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protecon against harmful interference in
a residenal installaon. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instrucons, may cause harmful interference to radio communicaons.
However, there is no guarantee that interference will not occur in a parcular
installaon. If this equipment does cause harmful interference to radio or
television recepon, which can be determined by turning the equipment o
and on, the user is encouraged to try to correct the interference by one of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separaon between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Cauon: Any changes or modicaons not expressly approved by the
party responsible for compliance could void the user’s authority to operate
this equipment.
This device complies with Part 15 of the FCC Rules.
Operaon is subject to the following two condions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operaon.
This device and its antenna(s) must not be co-located or operang in
conjuncon with any other antenna or transmier.
This Class [B] digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du
Canada.
Button Functions
BUTTON ACTION BUTTON ACTION
Power Buon Brightness Control Buons
NVIS/ Normal Mode Toggle
(oponal)
Waki-talkie Communicaon
Buons
Programmable Buons Baery Latch *Push the switch up to
unlock the latch, then slide the latch le to
remove the baery.
1 4
2
3
5
6
2
E
C D F
15
2
6
4 3
A B
Input/ Output Ports
Back Camera (oponal)
Front Camera (oponal)
LAN Port
USB 3.0 Port
USB Type-C Port
DC-in Jack
A
B
C
E
F
D
3
PRECAUTIONS
• Always exercise care when operang and handling the DT361DM.
• Do NOT apply excessive pressure to the display screen.
• We recommend using the Digital Pen (oponal) to keep the screen clean.
• Avoid prolonged exposure of the display panel to any strong heat source.
Wherever possible, the DT361DM should face away from direct light to reduce
glare.
• If the AC-DC power adapter is used to recharge or power the tablet, do NOT
use any AC-DC adapter other than the one provided or acquired from the
manufacturer or its partners.
• In the unlikely event that smoke, abnormal noise, or strange odor is present,
immediately power o the DT361DM and disconnect all power sources. Report
the problem to your device provider immediately.
• Never aempt to disassemble the DT361DM, as this will void the warranty.
BASIC FEATURES
The DT361DM rugged tablet integrates a dual mode switchable NVIS or high-brightness
touchscreen, USB ports, and embedded networking elements such as wireless LAN.
A DT361DM typically integrates an 802.11ac wireless LAN (WLAN) adapter that may
connect to other wireless devices or access points. If your DT361DM does not come
with such a network adapter, please consult your device provider to establish the
desired network connecvity.
NOTE:
To obtain protecon consistent with any IP rang for the device, the I/O (audio,
power, USB, card reader, etc.) port doors must be closed. If the IP protecon is
compromised by mishandling or misuse, such as by leaving port doors open or
improperly closed, any resulng product damage will not be covered under any
DT Research warranty.
OPERATION
Powering ON and OFF
To acvate the DT361DM, push and quickly release the Power Buon. The display will
come on in a few seconds. To put the DT361DM in Standby mode, push and quickly
release the Power Buon. To turn the DT361DM o for extended storage, power
o safely using any soware funcon that “shuts down computer” provided in the
soware operang system.
NOTE:
The baery pack shipped with your tablet may be low in power—please use
the AC-DC adapter with the DT361DM when seng up for the rst me to fully
charge the baery pack, or use the oponal baery charger kit.
NOTE:
To conserve power, use (push and quick release) the Power Buon to put the
tablet in “Standby” mode while not in use. Pushing briey on the same buon
will wake up the system within seconds.
NOTE:
Avoid using the Power Buon (“hold 4+ seconds” feature) to turn o the
tablet—this form of hardware shutdown is intended to be a means of recovery
from lockups, and not as normal operaon.
4
Start Up
If the power up (from Standby mode or otherwise) is successful, the appropriate
interface will be displayed aer a launch sequence of several seconds. The wireless
LAN connecon may take 10-15 seconds to be established.
Configuring the Rugged Tablet
The DT361DM may be congured using the ulies and methods dictated by
the soware operang system. The DT361DM should be congurable for various
properes such as user proles, network features, and several system elements.
NVIS Mode and Screen Brightness Control (optional)
• When power buon is pressed to power on the unit, power LED will ash orange
once to indicate the unit is boong. Unit will boot into NVIS mode with zero nit
brightness by default and display will be dark. You can press the “Brightness Up”
and “Brightness Down” buons to set NVIS mode display to desired brightness
(up to 20 nits).
• To toggle between NVIS and high-brightness display mode, press the “NVIS/
Normal Mode Toggle” buon. When changed from NVIS mode to high-brightness
mode, display brightness percentage will be same as the brightness level set in
NVIS mode before toggling.
• Use brightness control buons to set desired brightness level. When changed
from normal display mode to NVIS mode, display brightness will be set to 0 nit
(display is dark) and you need to use brightness control buons to change display
to desired brightness.
5
6
Wireless Networking
Wireless LAN
The DT361DM is oen delivered with an embedded (user-inaccessible) 802.11ac
WLAN adapter equipped with a hidden custom antenna.
• Through the support of typical WLAN adapters, the DT361DM should be able to
detect all 802.11 access points in the vicinity to select the access point of choice
for connecon.
• The SSID and WEP/WPA/WPA2 (if enabled) parameters on the DT361DM and the
access points have to match. The SSID is case-sensive and it is recommended to
enable WEP/WPA/WPA2 encrypon (or advanced alternaves) for secure access.
• When WEP/WPA/WPA2 is enabled, you may need to consult your network
administrator or your networking equipment literature to properly congure
associated sengs such as Authencaon mode, etc.
• Refer to the access point operang manuals for seng up the 802.11 access
points.
7
USING THE RUGGED TABLET
Peripherals Support
Through its USB 3.0 port, the DT361DM supports a wide range of USB-based
peripherals. These peripherals are applicable for soware installaon, applicaons
storage, data storage, and system soware recovery and updates.
For More Support
Users can download the Tablet Modules Basic Operaon Guides from the DT Research
website.
Altri manuali DT Research Tavoletta
DT Research
DT Research 590SC Istruzioni per il montaggio
DT Research
DT Research DT372AP-TR Istruzioni per il montaggio
DT Research
DT Research DT315CT Istruzioni per il montaggio
DT Research
DT Research DT301XC Istruzioni per il montaggio
DT Research
DT Research 502T Istruzioni per il montaggio
DT Research
DT Research DT301A Istruzioni per il montaggio
DT Research
DT Research DT307SQ Istruzioni per il montaggio
DT Research
DT Research 316T/MD Istruzioni per il montaggio
DT Research
DT Research DT370CR Istruzioni per il montaggio
DT Research
DT Research DT313Cmed Istruzioni per il montaggio
DT Research
DT Research DT381RP Istruzioni per il montaggio
DT Research
DT Research DT301YR Istruzioni per il montaggio
DT Research
DT Research DT311Y Istruzioni per il montaggio
DT Research
DT Research 311Q Istruzioni per il montaggio
DT Research
DT Research DT302RP Istruzioni per il montaggio
DT Research
DT Research DT362GL Istruzioni per il montaggio
DT Research
DT Research DT301T Istruzioni per il montaggio
DT Research
DT Research 301MD Istruzioni per il montaggio
DT Research
DT Research DT363GL Istruzioni per il montaggio
DT Research
DT Research DT365CT Istruzioni per il montaggio
