DT Research DT362GL Istruzioni per il montaggio

Rugged Handheld Tablet

BASIC OPERATION GUIDE

DT362GL

INTRODUCTION

The DT Research DT362GL Handheld Rugged Tablet features the integration of a high brightness 6”

capacitive touch screen and a high performance yet energy efficient processor within a slim, lightweight,

durable package. With built-in Wi-Fi, Bluetooth and a smart card reader as well as options for back camera,

barcode scanner, GNSS and UHF RFID reader, this robust tablet offers seamless information capture and

transmission for improved workflow. Rated IP65 and MIL-STD-810G, the DT362GL Handheld Rugged Tablet

provides reliable operation in harsh, mission-critical environments.

PACKAGE CONTENTS

• One DT362GL

• One Battery Pack and Handstrap

• AC-DC Power Adapter

• Basic Operation Guide

* The actual package contents may vary depending on the configuration acquired.

PRECAUTIONS

• Always exercise care when operating and handling the DT362GL

• Do not disassemble any portion of the DT362GL, as this will void any product warranty.

• Do not use any power adapter or charging cradle other than the one provided with the tablet or acquired

from the manufacturer or its partners.

• In the unlikely event that abnormal noise, strange odor, or smoke is present, immediately power down

the DT362GL and disconnect all power sources. Please report the problem to your device provider

immediately.

Input/ Output Ports Button Functions

A USB Type-C Port (power input) BUTTON

ACTION

Data Capture Modules 1 power button

B Barcode Scanner (optional) 2 Trigger Buttons

C Smart Card Reader 3 Battery Latch

D Back Camera (optional)

E UHF RFID Reader (optional)

OPERATION

Powering ON and OFF

To activate DT362GL, push and quickly release the Power Button. The display will come on in a few seconds.

To put the DT362GL in standby mode, push and quickly release the Power Button. To turn the DT362GL off

for extended storage, power off safely using any software function that “shuts down computer” provided in

the software operating system.

NOTE:

The battery packs shipped with your tablet may be low in power - please use the AC-DC adapter with

the DT362GL when setting up for the first time to fully charge the battery pack.

NOTE:

To conserve power, push and quick release the Power Button to make the tablet in standby mode

while not in use. Pushing briefly on the same butt on will wake up the system.

NOTE:

When the battery pack is charging, the blue-colored Battery LED should blink slowly. If plugging in the

AC-DC adapter does not trigger this blinking activity and the LED stays dark, the battery pack(s) may

have been drained substantially.

Unplug/ replug the AC-DC adapter to the DT362GL/ DT362Q a few times to activate the charging

process.

NOTE:

For DT362GL, avoid using the Power Button (“hold 4+ seconds” feature) to turn off the tablet—this

form of hardware shutdown is intended to be a means of recovery from lockups, and not as normal

operation..

Start Up

If the power up (from Standby mode or otherwise) is successful, the appropriate interface will be displayed

after a launch sequence of several seconds. The wireless LAN connection may take 10-15 seconds to be

established.

Wireless Networking

Wireless LAN

The DT362GL is often delivered with an embedded (user-inaccessible) 802.11ac LAN adapter equipped with a

hidden custom antenna.

• Through the support of typical WLAN adapters, the DT362G should be able to detect all 802.11 access

points in the vicinity for you to select the access point of your choice for connection.

• The SSID and WEP/WPA/WPA2 (if enabled) parameters on the DT362G and the access points have to

match. The SSID is case-sensitive and it is recommended that you enable WEP/WPA/WPA2 encryption (or

advanced alternatives) for secure access.

• When WEP/WPA/WPA2 is enabled, you may need to consult your network administrator or your

networking equipment literature to properly configure associated settings such as Authentication mode,

etc.

• Refer to the access point operating manuals for setting up the 802.11 access points.

Bluetooth

The Bluetooth configuration application is enabled from the System Tray or from the Windows Mobility

Center. Follow the instructions and options provided within the application to configure and invoke

Bluetooth connectivity with the corresponding peripherals.

Data Capture Module Operation Guide

If your DT362GL comes with a RFID Reader refer to the steps below to configure the settings.

UHF RFID Reader:

The optional UHF RFID reader supports EPC Gen2V2 and ISO 18000-63 standard. To develop an application to

use the UHF RFID reader, contact your device provider for a UHF RFID reader API package

For More Support

Users can download the Tablet Modules Basic Operation Guides from the DT Research website.

NOTE:

To ensure the system performance, turn on only the symbologies you are going to use.

Specifications:

Item DT362GL

System

CPU Intel® Pentium® Silver Quad-Core, 1.10GHz (up to 2.70GHz)

RAM 8GB

Storage 256GB

Operating System Microsoft® Windows® 10 IoT Enterprise

Display 6” LED-backlight capacitive touch screen

Display Resolution 720 x 1440

Network Interface Wi-Fi 802.11ac, 2.4GHz/ 5GHz dual band; Bluetooth 4.2 LE

Control Switch and

Buttons

1 power button, 2 trigger buttons

I/O Ports

USB port USB Type-C x 1

(data transmitting and charging. Data transmitting only available in one insertion direction)

Smart Card/CAC Reader

Full slot, reads ISO 7816 T=0, T=1; 1.8/3/5V smart card

Mechanical and Environmental

AC/DC Adapter Input: 100 – 240V AC; Output: 20V DC, 3.25A

Battery Pack Hot swappable battery, 3100mAh

Enclosure ABS + PC plastics

Dimensions (H x W x D)

7.6 x 3.7 x 1.2 in/ 192 x 95 x 31 mm

Weight 1.4 lbs/ 650 g

Regulatory FCC Class B, CE, RoHS compliant

Operating Temperature

Operation: -10°C to 50°C (14°F to 122°F )

Storage: -20°C to 60°C (-4°F to 140°F)

Humidity 0% – 90% non-condensing

DT Research, Inc.

2000 Concourse Drive, San Jose, CA 95131 http://www.dtresearch.com

CAUTION:

Any changes or modifications not expressly approved by the grantee of this device could void the user's

authority to operate the equipment.

FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful interference to

radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/ TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired

operation.

RF Exposure Information (SAR)

This device meets the government’s requirements for exposure to radio waves. This device is designed and

manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal

Communications Commission of the U.S. Government.

The exposure standard employs a unit of measurement known as the Specific Absorption Rate, or SAR. The

SAR limit set by the FCC is 1.6 W/kg. Tests for SAR are conducted using standard operating positions accepted

by the FCC with the EUT transmitting at the specified power level in different channels.

The FCC has granted an Equipment Authorization for this device with all reported SAR levels evaluated as in

compliance with the FCC RF exposure guidelines. SAR information on this device is on file with the FCC and can

be found under the Display Grant section of www.fcc.gov/eot/ea/fccid after searching on FCC ID:

YE3600-3165D2W

Indice

Altri manuali DT Research Tavoletta

DT Research

DT Research 311Q Istruzioni per il montaggio

DT Research

DT Research DT520 Istruzioni per il montaggio

DT Research

DT Research DT311Y Istruzioni per il montaggio

DT Research

DT Research WebDT 360 Istruzioni per il montaggio

DT Research

DT Research DT311 Istruzioni per il montaggio

DT Research

DT Research DT313SC Istruzioni per il montaggio

DT Research

DT Research DT311NV Manuale utente

DT Research

DT Research DT315CR Istruzioni per il montaggio

DT Research

DT Research DT395BT Istruzioni per il montaggio

DT Research

DT Research DT315CT Istruzioni per il montaggio

DT Research

DT Research DT301T Istruzioni per il montaggio

DT Research

DT Research DT302RP Istruzioni per il montaggio

DT Research

DT Research DT313C Istruzioni per il montaggio

DT Research

DT Research 316T/MD Istruzioni per il montaggio

DT Research

DT Research WebDT 375 Manuale utente

DT Research

DT Research DT372 Istruzioni per il montaggio

DT Research

DT Research DT370CR Istruzioni per il montaggio

DT Research

DT Research DT300Q11 Istruzioni per il montaggio

DT Research

DT Research WebDT 312 Istruzioni per il montaggio

DT Research

DT Research DT310CR Istruzioni per il montaggio

DT Research

DT Research DT311H Istruzioni per il montaggio

DT Research

DT Research 302MD Istruzioni per il montaggio

DT Research

DT Research 301Y/MD Istruzioni per il montaggio

DT Research

DT Research DT311T Istruzioni per il montaggio

Manuali Tavoletta popolari di altre marche

Laser

Laser MID-1060 Guida utente

MUNBYN

MUNBYN IRT09J Guida rapida

Motorola

Motorola MC3090R - Win CE 5.0 Professional 520 MHz Manuale utente

Dell

Dell Latitude ST Manuale del proprietario

Lenovo

Lenovo IdeaTab S6000L Manuale del proprietario

Venturer

Venturer WT9L11 Manuale utente

EDUGEAR

EDUGEAR UnoBook Manuale utente

Philips

Philips PI3210G/58 Manuale utente

ADLINK Technology

ADLINK Technology IMT-BT Manuale utente

TwinMOS

TwinMOS TwinTAB-T102D1 Manuale utente

Archos

Archos 9.7 xenon Manuale utente

Getac

Getac E100 Manuale utente

HANNspree

HANNspree HANNspad SN70T3 Manuale utente

Philips

Philips PI3105W2/55 Manuale utente

LG LG-V935 Manuale utente

Zeki

Zeki TBDB763B Manuale utente

Ricoh

Ricoh eQuill Manuale utente

MaxWest

MaxWest Nitro Phablet 9 Manuale utente