Ducati Manual Slide Manuale utente
1
APRICANCELLI SCORREVOLI
OUVRE PORTAIL COULISSANT
SLIDING GATE OPENER
AUTOMATIZACIONES PARA PUERSTAS CORREDERAS
SCHIEBETORANTRIEB
HOMEHOME
DUCATI
automationautomation
MANUALE SLIDE
2
INDICE: ENGLISH ................... p. 10
ITALIANO ................. p. 19
100 mt
Table. 02
Slide 600 Slide 800 Slide 646 Slide 846 Slide 646
Solar Set Slide
646 Set Slide
846 Set 646
Solar
SLIDE
1 x SL 643 1 x SL 843 1 x SL 640 1 X SL 840 1 x SL 640 1 x SL 640 1 X SL 840 1 X SL 840
Sw7012 12V 1x 1x 1x 1x 1x 1x 1x 1x
6203
Rol/6204 222222222
SW5000 1 1 1 1 1 optional optional optional
8602 Rack 8x (4m) 8x (4m) 8x (4m) 8x (4m) 8x (4m) 8x (4m) 8x (4m) 8x (4m)
6025/5 optional optional optional optional optional 1 1 1
SW7012 optional optional optional optional / optional optional /
SW7120 / / optional optional optional optional optional optional
Fash
7012 optional optional optional optional / 1 1 /
Fash
7120 optional optional optional optional optional optional optional 1
Sw6500 optional optional optional optional optional optional optional optional
12/7BAT optional optional optional optional optional optional optional optional
Solar 1010
(7910) / / optional optional 1 optional optional 1
C/M/BAT optional optional / / / / / /
Plak 8700 optional optional optional optional optional optional optional optional
6203P optional optional optional optional optional optional optional optional
6040 roll optional optional optional optional optional optional optional optional
KIT COMPOSITION & OPTION
3
alimentazione/
power imput/
alimetnation
Motor/
gear Watt Limit Electronic
board
model
Battery
charger
on board
STAND-BY
consumption
SL 643 230V 12V 140 600kg/ 8m CTH43 no
SL 843 230V 12V 200 800kg/ 12m CTH43 no
SL 640 230V - BATT SOL 12V 140 600kg/ 8m CTH46 yes
SL 840 230V - BATT SOL 12V 200 800kg/ 12m CTH46 yes
Table. 01
ON
OFF
DUCATI HOME
SOLAR OPION
230 V
Ref.6204 rol
Ref.6203 rol
FIG. 01
Kit SLIDE 600 - 646 - max 600kg/ 8m
Kit SLIDE 800 - 846 - max 800kg/12m
eur
ur
M
M
NO
YES
FIG. 02
325mm
230mm
180mm
FIG. 03
4
FIG. 04/ A
FIG. 04/B
FIG. 05 A FIG. 05 B
LOCK
UNLOCK
FIG. 06
FIG. 05 C
OPTIONAL
PLAK 8700
RED BLUE
BLUE RED
5
FIG. 09
FIG. 7/C
FIG. 7/D
105mm (-0+1)
33 mm (-0/+2)
Portail
FIG. 7/A
1 - 2 mm - max.
FIG. 11
RM
FIG. 10
R
M
FIG. 12
R
M
R
M
A
B
FIG. 7/B
FIG. 08
6
230 V
FUSE
T 0,8A
FIG. 13
FIG. 14/A
FIG. 14/B
FIG. 15/A
FIG. 15/B
CTH 43
CTH 43
CTH 46
CTH 46
N
L
7
START
TRANSFORMER
0 = BLACK
12 V = YELLOW
FUSE
T 0,8A
C
NO
24V
0
sec
100
sec C/M/BAT
optional battery
changer
Battery
PHOTOCELLS SW 7012
12 V
10W MAX
230V
0
100
RX
TX
FIG. 16
CTH 43
N L
8
PED
START
TRANSFORMER
0 = BLACK
12 V = YELLOW
FUSE
T 0,8A
PHOTOCELLS
SW 7120
12 V
10W MAX
0
100
RXTX
FUSE
T 0,8A
FIG. 17/A
CTH 46
9
TERMINAL
PHOTOCELLS SW7012 (CTH 46)
FCT
RXTX
FIG. 17/B FIG. 18
FIG. 22
FIG. 21
FIG. 20
FIG. 19
FIG. 23
FIG. 24
10
Very Important SAFETY RULES
READ AND FOLLOW ALL INSTRUCTIONS.
This door opener has been designed and tested to offer safe service provided it is installed, operated,
maintained and tested in strict accordance with the instructions and warnings contained in this manual. Failure
to meet the requirements stated in this instruction manual could cause severe injury and/or death, for which the
manufacturer cannot be held responsible.
BEFORE INSTALLATION:
Understand your new Door Opening system:
- Read this instruction manual in advance to thoroughly understand its function and features.
- Verify that this door opening system is proper for the type, size and weight of your door.
- Check the state of your door:
- Make sure that your door has been properly installed and is functional.
- Check the structure of the door, walls or pillars – they must be sound and stable.
- Make sure your door is properly balanced and lubricated. An unbalanced door could cause serious injury or
death!
- If the door binds, sticks or is out of balance, always call a trained, certified door systems technician to prevent
serious injury or death.
- Repair or replace all worn or damaged door components prior to installation. Call a trained professional door
systems technician for this.
- To avoid entanglement, remove any unecessary ropes and disable any equipment such as locks, not needed
for powered operation.
- To prevent damage to the door and opening system, always disable the locks before installing and operating
the opening system.
Prevent serious injury or death by electric power:
- Be sure the power is not connected BEFORE installing the door control.
- connect the door opener to the power source until instructed to do so.
- The door installation and wiring MUST be in compliance with all local electrical and building codes.
DURING INSTALLATION
Ensure your personal safety:
- Never wear watches, rings or loose clothing while installing or servicing the opening system. They could get
caught in the door opener mechanisms.
- Never try to loosen, move or adjust the door, door springs, or his hardware.
High voltage wiring (110V-230V power) must be done exclusively by a competent professional and certified
electrician.
Prevent serious injury or death:
- Be careful when manipulating with moving parts and avoid close proximity to areas where fingers or hands
could be pinched.
- Use concrete anchors when installing any brackets into masonry.
- Do not activate your door opening system unless you are sure that the area of its travel is clear of persons,
pets or other obstructions. Watch the door through its entire movement.
Never leave childrens without parental control in proximity of a gate opener in motion, opened, closed or
stopped.
- Never permit children to play with remote control push buttons or transmitters of gate opener and prevent
childrens to operate the gate opener by control push buttons or transmitters.
- Always keep remote controls out of reach of children.
- Install the electronic box of your opener out of reach of children and away of moving parts of the gate.
- Activate the gate only when it can be seen clearly, is properly adjusted and there are no obstructions to door
travel.
- Always keep gate in sight until completely closed.
Prevent damage of the opening system and reduction of its safety features:
- The motor fixing plates must be rigidly fastened to the pillar and to a well reinforced part of the gate
- Too much force on the garage door will interfere with proper operation of the safety reversal system.
- Never increase force beyond minimum amount required to close the garage door.
- Never use force adjustment to compensate for a binding or sticking garage door.
After any adjustment is made, the safety system must be tested.
Indice
Lingue:
Altri manuali Ducati Apricancello
