Duco Kitchen box Manuale utente
Installation guide
ENGLISH
Kitchen box
L2002431-installatiehandleiding-Keukenbox-(en)-DRUK
installation-guide-Kitchen-box-(en)
L2002431 (Revision B | 15.02.2023)
2
ENGLISH
L2002431 Installation guide for Kitchen box (Revision B | 15.02.2023)
Table of contents
01 Equipment �������������������������������������������������������������������������������������������������������������� 3
02 Versions������������������������������������������������������������������������������������������������������������������� 3
03 Accessories ������������������������������������������������������������������������������������������������������������ 4
04 Mounting options (for DUO variant) �������������������������������������������������������������� 4
05 Preparation for assembly ��������������������������������������������������������������������������������� 5
06 Installation of Kitchen box�������������������������������������������������������������������������������� 5
07 Mounting accessories����������������������������������������������������������������������������������������� 6
Vero Duco - Handelsstraat 19 - 8630 Veurne - Belgium
See www�duco�eu for information regarding warranty, maintenance, technical data, etc�
Installation, connection, maintenance and repairs are to be carried out by an accredited installer� The electronic components of this product may be live� Avoid
contact with water�
Translation of the original instructions
2 3
ENGLISH
L2002431 Installation guide for Kitchen box (Revision B | 15.02.2023)
01 Equipment
Supplied
Kitchen box Mono or Duo
Not included in the supply
1� Cable gland
2� Screws (take weight into account)
3� Optional (only if with iAV): external power supply 24V and power cable
02 Versions
Depending on the chosen version Kitchen box (Mono or Duo) there are 1 or 2 air inlets� A Duo offers the option of connecting an
extractor hood or a second valve via the second opening�
1� Inspection hatch
2� Front with air inlet 1
3� Mounting side with throttle valve
4� Frame with air inlet 2 (Duo variant)
5� Frame (Mono variant)
Duo
1
2
3
4
Mono
1
2
3
5
4
ENGLISH
L2002431 Installation guide for Kitchen box (Revision B | 15.02.2023)
03 Accessories
One valve is always needed� DUCO recommends DucoVent ZR (Hygro), as this makes it
easier to adjust the ventilation system�
Optionally, you can mount a Duco iAV for smart measurement based on CO2or humidity
(with or without a sensor in the valve itself)�
04 Mounting options (for DUO variant)
Inspection hatch on the right side
Air inlet 2 at the top Air inlet 2 at the bottom
Inspection hatch on the left
Air inlet 2 at the top Air inlet 2 at the bottom
5
ENGLISH
L2002431 Installation guide for Kitchen box (Revision B | 15.02.2023)
05 Preparation for assembly
Inspection hatch
Remove the inspection hatch�
Mounting side
Remove the mounting side�
Front
Remove the front�
06 Installation of Kitchen box
Provide a cable gland for cable entry on 1 of the fixed surfaces
Step 1
Drill a hole in one of the fixed surfaces of the frame, depending
on the installation situation�
Step 2
Mount a cable gland�
6
ENGLISH
L2002431 Installation guide for Kitchen box (Revision B | 15.02.2023)
Mount the Kitchen Box on the wall
Step 1
Position the mounting side�
Keep a free space of 15 mm from the wall and from the ceiling�
Step 2
Attach the mounting side�
Make sure the mounting side is level�
Step 3
Place the frame over the mounting side�
Hook the frame into the mounting side� Make sure it hangs
securely�
Step 4
Secure the suspension with a screwdriver�
07 Mounting accessories
Step 1
Optionally place an iAV in the Kitchen box�
7
ENGLISH
L2002431 Installation guide for Kitchen box (Revision B | 15.02.2023)
Step 2
Mount the valve on air inlet 1�
Step 3
Mount the valve on air inlet 2 if desired�
Step 4
Or mount a connection sleeve for connecting the extractor hood if desired�
Installed by:
L2002431 Document last modified on 15.02.2023 (revision B)
Indice
Altri manuali Duco Cappa di ventilazione
