Duetech Beres STP Lite Manuale utente
STP Lite User Manual Revision 1.02
STP Lite
'Smart Terminal Plus' Lite
Stand Alone GSM/GPRS Multi-Purpose Controller
with Logic Flow Lite Configuration Software
User Manual
Revision 1.02
STP Lite User Manual Revision 1.02
3
Notes
The reader is advised to read this manual carefully and to understand its
contents before using any devices.
Warranty claims for damage arising from failure to observe the instructions
given in this manual are invalid. We accept no liability for consequential
damage arising from the failure to observe the contents of this manual.
Duetech Beres reserves the right to make technical modifications or
alterations to this manual at any time without prior notice.
Various registered trademarks, company names and brand names appear in
this manual. Even if not designated as such, the relevant proprietary rights
still apply.
©2009 Duetech Beres, Ltd. All rights reserved.
The copyright and proprietary rights in the guide belong to Duetech Beres, Ltd. It is strictly
forbidden to copy, duplicate, sell, lend or otherwise use this guide in any way, shape or form
without the prior consent of Duetech Beres, Ltd.
This product is based on software developed by Duetech Beres, Ltd.
Redistribution of this manual and its use in binary form (PDF) are permitted, provided that the
above copyright notice and this paragraph are duplicated in all such forms and that any
documentation, advertising materials and other materials related to such distribution and use,
acknowledge that the software was developed by Duetech Beres, Ltd.
THE SOFTWARE IS PROVIDED “AS IS” AND WITHOUT ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
STP Lite User Manual Revision 1.02
4
Table of Contents
TABLE OF CONTENTS.................................................................................. 4
CHAPTER 1: INTRODUCTION ...................................................................... 6
SECTION 1.1 ABOUT THIS MANUAL ........................................................................6
SECTION 1.2 USES OF THE STP LITE .......................................................................6
SECTION 1.3 SAFETY ADVICE..................................................................................6
SECTION 1.4 STP LITE’S FEATURES AND BENEFITS................................................8
CHAPTER 2: OVERVIEW............................................................................... 9
SECTION 2.1 STP LITE GENERAL DESCRIPTION......................................................9
STP Lite Dimensions.............................................................................................9
Inputs ..................................................................................................................11
Output Events......................................................................................................12
Hardware Description........................................................................................13
CHAPTER 3: INSTALLING THE STP LITE ................................................. 15
SECTION 3.1 PACKAGE CONTENTS........................................................................15
SECTION 3.2 HARDWARE INSTALLATION..............................................................16
Mounting the STP Lite Unit................................................................................16
Connecting the GSM Antenna.............................................................................17
Installing the SIM Card ......................................................................................18
Connecting the RJ45 cable .................................................................................20
Attaching the RJ45 to DB9 Adapter....................................................................21
Attaching the Relay Output.................................................................................21
Installing the Digital Input..................................................................................24
Connecting the Power Supply.............................................................................25
SECTION 3.3 STP OPERATION ...............................................................................27
Status LEDS........................................................................................................27
Reset Button........................................................................................................29
CHAPTER 4:USINGLOGICFLOWLITE........................................................... 30
SECTION 4.1 GETTING STARTED WITH LOGIC FLOW LITE ....................................30
STP Lite Menus and Toolbar..............................................................................31
Verifying that there is communication with the STP Lite ...................................32
SECTION 4.2 CONFIGURATION SETTINGS ..............................................................34
Configuration Settings Screen ............................................................................34
SECTION 4.3 READ INPUTS COMMAND..................................................................35
PHONEBOOK SETUP.................................................................................................36
Adding a Number to the Phonebook...................................................................36
Removing a Phone Number from the Phonebook...............................................37
Exporting a List of Phone Numbers from the Phonebook into a File.................38
Importing a List of Phone Numbers into the Phonebook....................................38
SECTION 4.4 SETTING THE STP'S INPUT EVENT ....................................................38
"Digital" Input Event..........................................................................................40
"OUTPUT" Input Event......................................................................................40
"Main Power" Input Event..................................................................................41
"Timer" Input Event............................................................................................41
"SMS" Input Event ..............................................................................................42
"Incoming Call" Input Event...............................................................................43
"RS232" Input Event...........................................................................................43
"DISARM" Input Event.......................................................................................44
"STARTUP" Input Event.....................................................................................46
STP Lite User Manual Revision 1.02
5
SECTION 4.5 SETTING THE STP'S OUTPUT EVENTS...............................................47
"Digital" Output Event........................................................................................47
"Timer" Output Event .........................................................................................49
"SMS" Output Event............................................................................................50
"GPRS" Output Event.........................................................................................51
"RS232" Output Event ........................................................................................52
"Outgoing Call" Output Event............................................................................52
"Buzzer" Output Event........................................................................................53
"Reset" Output Event ..........................................................................................53
"Alarm" Output Event.........................................................................................54
SECTION 4.6 EDITING THE STP LITE INSTRUCTION SET .......................................55
Saving a set of instructions in a file....................................................................55
Loading a saved set of instructions.....................................................................57
Removing instructions from the list ....................................................................57
Editing the Instruction List .................................................................................58
Expanding/Collapsing the Instruction List.........................................................59
SECTION 4.7 WRITING LOGIC TO THE DEVICE.......................................................59
Procedure for Writing the Instructions to the STP.............................................59
Troubleshooting a Failed Write to the STP Lite.................................................60
SECTION 4.8 SOME USEFUL EXAMPLES.................................................................61
Finding out the STP’s Phone Number................................................................61
Using the STP Lite’s DISARM Option to Set an Alarm......................................62
Using the STP Lite’s Timer Option.....................................................................62
Using the STP Lite’s DISARM Option................................................................63
CHAPTER 5: TROUBLESHOOTING ........................................................... 65
Problem No' 1: Unable to read or write data from the configuration menu......65
Solution suggestions ...........................................................................................65
Problem No' 2: Can't send/receive calls, SMS, GPRS........................................65
Solution suggestions ...........................................................................................65
Problem No' 3: green led is constantly on..........................................................66
Solution suggestions ...........................................................................................66
Problem No' 4: Led's not working ......................................................................66
Solution suggestions ...........................................................................................66
CHAPTER 6: FOR FURTHER INFORMATION............................................ 67
STP Lite User Manual Revision 1.02
6
Chapter 1: Introduction
The STP (Smart Terminal Plus) Lite is a user-friendly, general-
purpose GSM/GPRS cellular programmable controller. The STP Lite
can be used for a wide variety of purposes: agriculture, home
automation, or security. The STP Lite accepts one digital input and has
one dry-contact (relay) output.
Section 1.1
About This Manual
This manual will guide you through the setup and major uses of the
Smart Terminal Plus Lite (STP Lite), a powerful remote-control and
monitoring device. This manual includes:
A list of the uses of the STP Lite
STP Lite’s features and benefits
A general description of the STP Lite
Instructions for installing the STP Lite hardware
Instructions for installing the Logic Flow Lite software
Instructions and examples of using the Logic Flow Lite interface
Section 1.2
Uses of the STP Lite
The STP Lite owes its name to the fact that it employs a minimal
number of inputs and outputs. However, this poses no limitation on the
range of uses for the STP Lite. You can employ the STP Lite in:
Security
Home and Industrial automation
Gate Control
General Warning System
Gateway Telemetry solutions
Agriculture
Climate Monitoring
Cooling Control
Automation
Section 1.3
Safety Advice
The STP Lite is designed to be used only under the prescribed
conditions. Ensure that all the specifications stated in this manual are
observed. Tampering with the hardware or software, or failure to
observe the warnings stated in this manual may lead to serious
physical injury or damage to the device. We assume no liability in such
cases, and any warranty claims will become void.
The safety regulations specified for the device must be observed
during the installation, maintenance and use of the device.
STP Lite User Manual Revision 1.02
7
This manual contains special instructions that are important for the safe
and proper handling of the device. The warning symbols you will
encounter in the manual have the following meaning:
DANGER: Indicates warning of possible danger to the life and health
of the user if the relevant safety measures are not taken.
ATTENTION: Indicates warning of possible damage to the device,
software, or other material damage if relevant safety measures are
not taken.
STP Lite User Manual Revision 1.02
8
Section 1.4
STP Lite’s Features and Benefits
Some unique features of the STP Lite are:
Quad-Band GSM SMS/GPRS—allowing you to access and control
the STP Lite device via your cellular phone or the Internet
An RS232 interface for direct communication with the STP Lite
controller, as well as for user-defined purposes (PLC, PC, GPS to
any RS232 device)
An event report, which allows you to make the STP Lite send a
report to you via Serial Communication. (RS232). This way, the
user can create Word/Excel reports based on the data from the
STP.
Internal Li-Ion rechargeable backup battery, for sending a power
failure alarm (via SMS or GPRS) in case the main power supply is
cut off.
Accompanying the STP Lite is the Logic Flow Lite Configuration
software package. Some features of the Logic Flow Lite program are:
It allows you to program the STP Lite device to control a system
and do the desired controller tasks quickly and efficiently
It allows you to monitor your system.
STP Lite User Manual Revision 1.02
9
Chapter 2: Overview
This chapter provides a brief Overview of the STP Lite and includes
the following:
General Description
Hardware Description
Section 2.1
STP Lite General Description
The STP Lite is a stand-alone, multipurpose terminal with extended
logic control, with cellular capabilities. The STP Lite accepts one digital
input and has one dry-contact (relay) output.
STP Lite Dimensions
Figure 1: Front View of the STP Lite
STP Lite User Manual Revision 1.02
10
Figure 2: Side View of the STP Lite Showing Dimensions
STP Lite User Manual Revision 1.02
11
Inputs The STP Lite supports 8 different types of input events, four external,
and four internal:
Table 1: STP Lite Inputs
External Input Description
DIGITAL INPUT: A digital sensor.
These can include:
Thermostat
Smoke detector
Motion sensor
SMS: An SMS message from your mobile phone.
INCOMING CALL: Allows the STP Lite to
respond to an incoming call (the STP will reject
the incoming call and only use the Caller ID, if
needed).
RS232: An RS232 message from any capable
device (for example, a computer or a PLC).
In addition, there are four other input events that the STP Lite
essentially can send to itself. These are shown in the following table:
Internal Input Description
TIMER:Triggers as timer event occures.
OUTPUT: To have the STP Lite respond to an
output change caused by a particular event.
DISARM: triggers when disarm status has
changed.
STARTUP: Performs the specified output event
when the device is started, or if the user presses
the Reset button.
Indice
