Duke 114585 Manuale utente
This manual is Copyright © 2021 Duke Manufacturing Co. All rights reserved.
Reproduction without written permission is prohibited. Duke is a registered
trademark of the Duke Manufacturing Co.
CAUTION: Please read these instructions completely before attempting
to install, operate or service this equipment.
Instruction Sheet
Hot Frost Thinstick
Light Kit Replacement
114585 - 35” Unit
114586 - 48” Unit
114587 - 50” Unit
114588 - 64” Unit
114589 - 91” Unit
P/N 529337
REV A 07/19/2021
2
Installation and Operation of: Hot Frost Thinstick Light Kits
PARTS INCLUDED
Item Part
Number Description 114585
35” Unit
114586
48” Unit
114587
50” Unit
114588
64” Unit
114589
91” Unit
1 Various Mounting Plate 1 1 1 1 1
2514920 Thinstick-LED Light 8”
TS/8/4000/M N/A N/A 2 1 N/A
3514921 Thinstick-LED Light 12”
TS/12/4000/M N/A 1 N/A N/A N/A
4 514922 Thinstick-LED Light 24”
TS/24/4000/M 1 1 1 N/A 2
5 514923 Thinstick-LED Light 34”
TS/34/4000/M N/A N/A N/A N/A 1
6514924 Thinstick-LED Light 46”
TS/46/4000/M N/A N/A N/A 1 N/A
7213032 Screws, 8-18X1/2”TEK PHIL 6 10 10 12 20
8 514929 LED Power Cord 1 1 1 1 1
9* PT3003190 #29 Drill Bit 1 1 1 1 1
* Not Shown
Tools Needed
Cordless Drill
Philips Screw Driver Straight Blade Screw Driver
3
Installation and Operation of: Hot Frost Thinstick Light Kits
INSTRUCTIONS
1Open box and verify you have all
the parts for your size unit. 2DISCONNECT ALL POWER TO
UNIT.
Failure to complete could cause bodily injury.
3Remove light covers and remove
existing lights from retainer clips. 4Using the #29 drill bit provided,
drill out the rivets to remove the
retaining clips. (If needed)
5Remove old power cord.
6Using the screws provided install
mounting plate using the hole
location drill out in step 4,
7Install new LED lights.
8Reconnect power to unit. 9Power on unit and verify lights are
properly working.
10 Discard all components properly
removed from the unit. Recycling if
possible
4
Installation and Operation of: Hot Frost Thinstick Light Kits
WIRE DIAGRAMS
5
Installation and Operation of: Hot Frost Thinstick Light Kits
WIRE DIAGRAMS
6
Installation and Operation of: Hot Frost Thinstick Light Kits
WIRE DIAGRAMS
7
Installation and Operation of: Hot Frost Thinstick Light Kits
BLANK PAGE
Installation and Operation of: Hot Frost Thinstick Light Kits
Duke Manufacturing Co.
2305 N. Broadway
St. Louis, MO 63102
Phone: 314-231-1130
Toll Free: 1-800-735-3853
Fax: 314-231-5074 www.dukemfg.com
Questo manuale è adatto per i seguenti modelli
4
Indice
Altri manuali Duke Attrezzatura di illuminazione
