DUKWIN DK Series Manuale utente

CATALOGUE

Introduction

1. Power

1.1 Optional Plug

2. The back of the watch winder

3. Controls

3.1 LCD Touchscreen Control Panel

3.2 Initialization Mode

3.3 All Mode

3.4 Custom Mode

3.5 New Watch Mode

4. Winding Mode

5. Remote Control

6. Fingerprint Lock

6.1 Fingerprint Accounts Setting

6.2 Fingerprint Accounts Remove/Reset

7. Watch Cuff

7.1 How to use the cuff

8. LED Light Stripe and Ambient Light

8.1 LED Light Stripe

8.2 Ambient Light

9. Contact

Congratulations on your purchase of this watch winder.

Please review this quick start guide so that your auto-

matic watch will beneﬁt fully from the features that have

been engineered into this product.

This appliance can be used by children aged from 8

years and above and persons with reduced physical,

sensory or mental capabilities or lack of experience and

knowledge if they have been given supervision or

instruction concerning use of the appliance in a safe way

and understand the hazards involved. Children shall not

play with the appliance. Cleaning and user maintenance

shall not be made by children without supervision.

Appliance is only to be used with the power supply unit

provided with the appliance.

Introduction

This module ﬁngerprint watch winder comes with a power adapter

(AC/DC5.0V-volt. 2.0A output)

1Power

NOTE:

1. External power connection is required to use ﬁngerprint lock, external

power input is DC5V, please do not connect reverse polarity.

2. Never use any unauthorized power adapter or not up to speciﬁcation

power adapter.

1.1 Optional Plug

Power supply: 5.0V AC Adapter(US/UK/AU/EU)

Suitable for various 5.0V 2.0A USB speciﬁcations plugs

US Standard EU Standard UK Standard

AU Standard

Power bank USB Connection

GW-POWER

Model :GW12W-050200UU

INPUT : 100-240V-50 / 60HZ 0.3A

Output : 5.0V 2.0A 10W MADE IN CHINA

2The back of the watch box

3Controls

Power Switch Pause Switch AC Adapter Input Port

PAUSE SWITCH:

When you turn on the "pause switch" and open the front cover, all drums will

immediately stop rotating. When you turn off the "pause switch" and open

the front cover, all drums continue rotating. Your watch will always stop at

the 12 o'clock position when the cycle is complete.

With the adapter connected, turn on the "Power Switch". The display will be lit

and all options will ﬂicker back and forth, then you can set the programs by

Touchscreen Control Panel or the Remote Control.

3.1 LCD Touchscreen Control Panel

Ticked

icon

Switch(Run

/Pause/Stop)

Working Hour

/Motor Options

Direction Lights Control

TPD ALL Mode

(Switch Diagram)

Pause Run Stop

3.2 Initialization Mode

Initialization Mode

1. Hold down the “ALL” button for 5 seconds to display Initialization. Press the

“Run” button to perform initialization. The ticked icon will appear in the upper

left corner of the middle four choices, representing the “ALL” Mode. When you

choose any other button, initialization mode will go off and returns to the

original mode of your operation.

2. Initialization parameter: TPD=850; Direction=bidirectional; Switch =Stop;

Motor Selection=01 group; ALL=ALL selected. Working Hours=24 hours.

3. When you change any of the parameters: Switch - TPD - Direction - Lights,

the initialization mode will exit and the initialization prompt will go off.

(If you have any questions, check out our YouTube video link)

Tap the "ALL" button 4 times until the top left corner of each of the four

options shows a ticked icon, or Press the "motor selection" and "Run"

buttons at the same time for 5 seconds, and then tap the "Run" button. All

watches will be set to the current mode. . If you change the parameters of

“Switch - TPD - Direction”, all watches will be change to the current

parameters.

(If you have any questions, check out our YouTube video link)

Motor Options:

If the current mode is ALL, just tap the “ALL” button again, the “Motor Options”

will appear, and you can set the mode of each motor individually.

New Watch Mode: Press and hold the "TDP" button until " ----" diagram is

displayed.

Note: During the new watch mode, any operation will cause the new watch

mode to exit and return to the previous settings.

3.3 ALL Mode

Motor Options

3.4 Custom Mode

3.5 New Watch Mode

----

New Watch Mode Working Chart

Direction Setting Working Time Rest Time

Clockwise 4 hours

Counterclockwise 4 hours

Clockwise for 2 hours and

Counterclockwise for 2 hours

Bi-directional 8 hours

8 hours

Finally return to the previously setting mode

4Winding Mode

1. The TPD value is between 300 - 2300. By turn up and turn down to change

TPD value, over 300 TPD returns to 2300 TPD cycle.

2. TPD Calculation Method: 10 turns per cycle

24-hour mode operating cycle (minutes) =1440/ (TPD/10 turns);

12-hour mode operating cycle (minutes) =1440/ (TPD/10 turns) /2;

8-hour mode operating cycle (minutes) =1440/ (TPD/10 turns) /3;

e.g: TPD set to 650, clockwise, 24 hours mode. Then the running period (minutes)

=22.2, that is, each cycle is 22.2 minutes.

Cycle execution: the time required for the motor to rotate clockwise 10 times

+ the motor stop time = 22.2 minutes. In the 12 (8 hours) working mode, the

cycle runs for 12 (8 hours) hours and then stops; stops for 12 (16 hours)

hours, and then restarts the cycle.

Note:

There is no magic number of rotations that will wind your watch. Things such

as how active you are, how many complications your watch has, how

frequently you use the chronograph function, how frequently you wear your

watch, the watch make, how long it has been since it was last serviced and a

host of other variables will impact what your watch requires to stay wound.

And a watch winder won't wind a watch that is fully stopped. So, you need to

manually wind the timepiece to get it running ﬁrst. You will have to make this

determination by trying the various settings.

Run & Stop

Bi-directional

Watch Selection

(Right)

TPD selection

Watch Selection

(Left)

5Remote Control

6Fingerprint Lock

A. Admin Key

B. Fingerprint panel: Put your ﬁnger in here to identify.

C. LED Status: There are 3 LED status, blue light, red light and pink light.

1950

TPD

650

850

1000 750

LED Light Control

Power Switch

New Watch

Mode Key

Note:

Only 650,750,850,1000 and 1950 TPD can be adjusted by remote control.

Other TPD modes need to be adjusted manually by touchscreen.

Note:

· Factory Mode: Any ﬁngerprint can be unlocked

· Status of successful ﬁngerprint enter: The blue light will be on for 2 seconds.

· Status of unsuccessful ﬁngerprint enter: The red light will ﬂash for 3 times.

· The ﬁngerprint sensor can set up to 20 ﬁngerprint users(2 administrator

and 18 user accounts)

· The ﬁrst two ﬁngerprints entered are administrators by default.

· Please do not set duplicate ﬁngerprints account.

6.1 Fingerprint Accounts Setting

6.1.1 Fingerprint Veriﬁcation Setting Mode

1. First administrator ﬁngerprint account setting:

Press and hold the ﬁngerprint sensor panel for 7 seconds, do not release

your ﬁnger, after the blue indicator ﬂashes 3 times, you can release your

ﬁnger, and then the pink indicator ﬂashes once, indicating that it will enter

the ﬁngerprint registration state: Using the ﬁngerprint you deﬁned as an

administrator, input 6 valid presses continuously on the panel, the blue light

will ﬂash once every time you press it, until the system collects your ﬁnger-

prints 6 times, the blue light will be on for 2 seconds, indicating that the ﬁrst

ﬁngerprint entry is successful, and exit the ﬁngerprint entry mode.

Note:

During ﬁngerprint entry, if the red light ﬂashes, it is invalid entry, and it is

necessary to continuously enter valid ﬁngerprints for 6 times with the blue

light ﬂashing 6 times.

2. Second administrator ﬁngerprint account setting:

Press and hold the ﬁngerprint sensor panel for 7 seconds, do not release

your ﬁnger, after the blue indicator ﬂashes 3 times, you can release your

ﬁnger, and then the pink indicator ﬂashes once, indicating that you should

enter once your ﬁrst administrator ﬁngerprint to conﬁrm, then put your

second administrator ﬁnger on the panel input 6 valid presses continuously.

The blue light will ﬂash once every time you press it, until the system collects

your ﬁngerprints 6 times, the blue light will be on for 2 seconds, indicating

that the second administrator ﬁngerprint entry is successful.

There are two ﬁngerprint setting modes: Using Fingerprint Veriﬁcation OR

Using Admin Key.

Indice

Altri manuali DUKWIN Accessori

DUKWIN

DUKWIN DK01 Series Manuale utente

Manuali Accessori popolari di altre marche

Hillco

Hillco 2810 Manuale utente

Siemens

Siemens QSA2700D Manuale dell'operatore

Contours

Contours ZY024 Manuale utente

Saivod

Saivod VS621 Manuale utente

Virtuox

Virtuox VirtuCLEAN 2.0 Manuale utente

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manuale utente

Z-Wave

Z-Wave HSD-200Z Manuale utente

turck

turck FMX-IM-2UPLI63FX Manuale utente

Decagon Devices

Decagon Devices 10HS Manuale utente

UPPAbaby

UPPAbaby Cup Holder Manuale utente

Elko

Elko SmartSensor Leakage Wireless Manuale utente

Grizzly

Grizzly H8371 Manuale utente

Panasonic

Panasonic HG-T Series Manuale utente

IFM Electronic

IFM Electronic Efector 250 Series Guida di riferimento

DigiDesign

DigiDesign 888/24 I/O Manuale utente

PROZIS

PROZIS QUAY Manuale utente

patagonia

patagonia PSI Vest Manuale utente

SFC Energy

SFC Energy EFOY GO! Manuale utente