Dungs VisionBox Manuale utente

MF … 26

M • Edition 07.20 • Nr. 270 173

1 … 26

The VisionBox allours the setting of the parameter values of

DUNGS control devices via PC, Laptop or Tablet PC

(from WIN 10, with USB connection).

Suitable for:

MPA 4xxx

MPA 51xx

VPM

W-FM25

Description

DUNGS VisionBox

2. Warnings

Never carry out work as long as gas

pressure or voltage is applied. Avoid

open re. Please observe public regu-

lations.

The device must be protected from

vibrations and mechanical impacts.

All adjustments and settings should

only be performed in accordance with

the instruction manuals of the con-

nected machines.

The recognised occupational safety

rules and accident prevention regula-

tions must be observed and, if neces-

sary, personal protective measures

must be taken.

The device may only be operated in

compliance with the operating condi-

tions stated on the type plate.

Prior to assembly, the device must be

inspected for transport damage.

The device must not be used in areas

with increased seismic risk

Protection from environmental im-

pacts and weather conditions (corro-

sion, rain, snow, icing,

humidity (e.g.

by condensation),

mould, UV radiation,

harmful insects, poisonous, corrosive

solutions/liquids (e.g. cutting and

cooling uids), must be guaranteed.

Depending on the installation site, it

may be necessary to take protective

measures.

The device must not be exposed to

open re. Protection against lightning

strikes must be guaranteed.

2.1 General warnings

Application

Explanation of the symbols

1, 2, 3,... = Order of

action

• = Instruction

Suitable operating systems:

WIN XP, 7, 8, 8.1, 10

Note: Passwords are required to install the software and

for parameterization of the systems.

Please contact your DUNGS sales representative for the

passwords your require.

2 … 26

M • Edition 07.20 • Nr. 270 173

2.2 Designated use

The device is used in accordance with its designated use

if the following instructions are observed:

• Applicable only with suitable DUNGS systems and

software

• Use only in compliance with the operating conditions

stated on the type plate.

2.3 Risks in case of misuse

• If used in accordance with their designated use, the

devices are safe to operate.

• Non-observance of the regulations may result in per-

sonal injury or material damage, nancial damage or

environmental damage.

3. Approval / declaration of conformity

• Operator errors or misuse present risks to life and

limb of the operators and also to the device and other

material property.

• Use in perfect condition only.

• Malfunctions and faults must be eliminated immedi-

ately.

• Use only in observance of the instructions given in this

instruction manual and of national regulations.

2 … 26

M • Edition 07.20 • Nr. 270 173

3 … 26

4. Table of contents

1. Target group 1

2. Warnings 1

2.1 General warnings 1

2.2 Designated use 2

2.3 Risks in case of misuse 2

3. Approval/declaration of conformity 2

4. Table of contents 3

5. Inhalt VisionBox mini 4

6. Software Download and Installation 6-9

7. Connection VisionBox 10

8. Operation VisionBox Software 11-13

8.1 Change of access level 14-15

8.2 Copy of a existing parameter set 15

8.3 Change of parameter 16-17

9. Error overview 18

10. VisionBox Update Software 19

11. VisionBox Update error messages 19-20

12. Documentation device conguration 21-22

13. Send device conguration via email 23

14. Reset to factory setting 24

4 … 26

M • Edition 07.20 • Nr. 270 173

The VisionBox mini includes the adapter to connect a

PC/Laptop to MPA and VPM systems.

The required software is not included. It is available from

the download ares in the DUNGS homepage

www.dungs.com/softwaretools

5. Content VisionBox mini

Connecting cable PC/VisionBox

VisionBox

Connecting cable VisionBox/TWI connection

MPA, VPM

4 … 26

M • Edition 07.20 • Nr. 270 173

5 … 26

6. Software Download and Installation

www.dungs.com/softwaretools

> VisionBox

Installation:

Select a le and select „Open“

Download the le

Run the .exe le



Press „Ausführen“



Choose language during installation



Conrm „Next“

6 … 26

M • Edition 07.20 • Nr. 270 173

6. Software Download and Installation



Enter Password



Conrm target folder „Yes“

Select Start Menu Folder

Conrm with „Next“



Select target folder

Conrm with „Next“

6 … 26

M • Edition 07.20 • Nr. 270 173

7 … 26



Select icon on desktop and / or in quick

start bar

To install the program on a Tablet PC

choose „Tablet mode“

Conrm with “next”



Start installation: „Install“



Please wait, installation continues

6. Software Download and Installation

8 … 26

M • Edition 07.20 • Nr. 270 173



Please conrm „I accept…“, continue

installation “Install”

Please wait, installation continues

Complete Installation „Finish“

6. Software Download and Installation

8 … 26

M • Edition 07.20 • Nr. 270 173

9 … 26

6. Software Download and Installation



Complete installation of the VisionBox pro-

gram „Finish“

Restart the computer to enable the changes

10 … 26

M • Edition 07.20 • Nr. 270 173

7. Connection VisionBox

1. De-energize MPA / VPM.

2.Connect the 4-pin connector of the VisionBox to the ter-

minal „TWI“ - note encoding.

3. Connect the VisionBox to the computer / laptop and

start the PC / Laptop.

LED Power – on

4. Energize MPA / VPM.

LED MPA – on

LED PC – ashing

ATTENTION: Line voltage, don´t touch any live parts.

Mind the safety rules when working with energized elec-

trical components.

LED Power – on

LED MPA – on

LED PC – ashing

5. Start program VisionBox.

6. Connect MPA/VPM to VisionBox Software

7. All LED are permanent on

Indice

Altri manuali Dungs Controllori

Dungs

Dungs DMA Manuale utente

Dungs

Dungs MultiBloc MBC-SE Series Manuale di servizio

Dungs

Dungs FRM 100065 Manuale utente

Dungs

Dungs CP -9302-702 Manuale utente

Dungs

Dungs FRM Series Manuale utente

Dungs

Dungs GasMultiBloc MB-ZRD B01 Series Manuale utente

Dungs

Dungs DGAU. 09/2 Guida del prodotto

Dungs

Dungs DGAI. 27F/3 Manuale di servizio

Dungs

Dungs GasMultiBloc MB-D B01 Series Manuale utente

Dungs

Dungs GasMultiBloc MB-D 055 D01 Manuale di servizio

Dungs

Dungs GasMultiBloc MB-VEF B01 Manuale di servizio

Dungs

Dungs GasMultiBloc MB-ZRD B07 Series Manuale di servizio

Dungs

Dungs DSLC px Vx Manuale di servizio

Dungs

Dungs FRM 100065 Manuale utente

Dungs

Dungs DGAI. 131F Manuale utente

Dungs

Dungs hiltbrand DGAI. 69F Guida del prodotto

Dungs

Dungs FRI 7/6 Series Manuale utente

Dungs

Dungs FRM 100025 ND Manuale utente

Dungs

Dungs FRSBV 10010 Series Manuale utente

Dungs

Dungs FRM-NOC Manuale utente

Dungs

Dungs MPA22 Manuale di servizio

Dungs

Dungs GasMultiBloc MB 403 B01 Series Manuale utente

Dungs

Dungs MultiBloc MBC-VEF Series Manuale di servizio

Dungs

Dungs EMP-5 Manuale utente

Manuali Controllori popolari di altre marche

Digiplex

Digiplex DGP-848 Istruzioni operative

YASKAWA

YASKAWA SGM series Manuale utente

Sinope

Sinope Calypso RM3500ZB Manuale utente

Isimet

Isimet DLA Series Style 2 Manuale di installazione

LSIS

LSIS sv-ip5a Manuale utente

Rockwell Automation

Rockwell Automation 1769-L31 Manuale utente

Airflow

Airflow Uno hab Manuale utente

ABB

ABB ACS580-01 drives Manuale utente

Panasonic

Panasonic GM1 Series Manuale utente

Emerson

Emerson SW93 Manuale utente

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuale utente

Panasonic

Panasonic FP? Positioning Unit RTEX Manuale utente

Samson

Samson Type 5824 Manuale di servizio

Alpha IP

Alpha IP MIOB 21001 Manuale utente

Siemens

Siemens OpenAir GMA 1 Series Manuale utente

Surecom

Surecom SR-629 Manuale utente

Fishman

Fishman TriplePlay Manuale utente

Regulus

Regulus SRS1 T Manuale utente