Durafly BRAVADO Manuale utente
Features of the Bravado
Specications
Examine your kit carefully
1. ‘AirCore’ construction resulting in both a lightweight, yet strong structure.
2. Powerful set-up as standard for hardcore 3D and aerobatic performance.
3.Quick and easy assembly with minimum parts count.
4. Clean airframe design with easy battery access and generously sized control surfaces.
5. Made from durable and easy to maintain EPO foam and with spare parts readily available.
Wingspan: 1000mm ( 39.4 in.)
Flying Weight: 700-780g (1.5 -1.7lbs)
Motor: 2814 Kv1000
ESC: 40 Amp
Servo: 4 x Turnigy TG9d 9g digital servo’s
Radio：4/more channel
Receiver: 4/more channel
Battery: 3 cell 1000-1300mah lipo 25c min (required)
Prop: 11x
Recommended Environment: Outdoor/large indoor area.
Assembly Time: Less than 1 Hour
Duray model kits are subject to QC checks throughout production, and we sincerely hope that
you are completely satised with the contents of your kit. However, before assembling, we ask that
you check all parts against the parts list. If you are missing any parts, please contact Customer
Services via hobbyking.com. Also check for any damage to the any item within the box. Your model
has travelled a long way, and in some case could have sustained some damage. If you feel the
damage is beyond ressonable repare, please contact CS.
Please note:
We are constantly working on improving our models, therefore every model is subject to change
without notice.
This is a sophisticated hobby product and is NOT a toy. It must always be operated with caution,
common sense and some basic mechanical ability. This manual provides instructions as the the
assembly, safe opperation and maintainence of this hobby product. It is highly reccommneded that
you follow and read fullythe instructions and warnings stated in this manual including, safety,
assembly, set-up and ying guidelines in order to operate this product correctly and avoid damage
or serious injury.
Do not y under the conditions below
Foam parts included in the packing
Cautions for ying
Note for Storage
Tools:
•Strong winds (more than 20pmh)
•Other storm like conditions
•Area close to high voltage wires
•Area with high density population
•Never leave you ight battery installed in the model when storing.
•If hanging the model, ensure the control surfaces are not taking the weight of the model.
•Store away from direct sunlight and ideally at room temperature.
•Secure your model for storage incase it moves and gets damaged.
3
9
2
5
4
8
1
10
7
6
3
9
2. Wing
5. Winglet
8. Canopy
3. Left aileron
6. Rudder
9. Landing gear slice
1. Fuselage
4. Right aileron
7. Rudder bolt
10.Stabilizer
While parks make excellent ying areas, make sure you have permission to y there and follow safety
guidelines set by local authorities.
Required: Scissors, Balsa knife, Combination pliers, Screwdriver, Quick-dry glue
02
12
17
18
19
20
16
13
15
14 21
11
16. Tail wheel
17. 1155 propeller
18. Rudder pushrod (φ1.2 piano wire)
19. Elevator pushrod (φ1.2 piano wire)
20. Aileron pushrod (φ1.2 piano wire)
21. Screw (M3*8)
11.Landing gear
12. Spinner
13. Screw (M4*30)
14. Screw (M2*5)
15. Adjustor
Parts included in the packing
A
B
1
2
2
3
4
Assembly steps
1. Aseembly begins with the wing (2) and fuselage (1). Incert the wing panel into the slot in the
fuselage and glue in place. Insure that distance A is equal to B.
2. Hinges (4 for each side) can now be glued into the pre-cut slots of the trailing edge of the wing
(2). Once dryed you can then glue the ailerons(3&4) to the hinges.
04
4. The horizontal tail (17)can now be glued in place at the rear of the fusealge asr shown.
Ensure distances E and F are equal and that the tail is horizontally level.
C
D
51
F
17
1
E
3. Insert the fuselage winglet (5) into the upper fusealge slot and glue in place.
Ensure distance C is equal to D.
5. Place vertial trailing edge insert (7) into pre-cut slot at the rear of fuselage, then x with glue.
6. Connect Z bend (18) to servo control horn on rudder (6), then push pushrod into pushrod tube.
7
1
18
6
18
1
Fuselage Assembly
06
1
18 6
1
11
13
7. Glue 4 hinges into the rudder (6) then glue the rudder to the vertical tail (1) as shown below.
8. With the rudder in place the landing gear (11) can now be installed. Locate the supplied
M4x25mm bolts (13) and secure to the fuselage (1) using a screw driver as shown.
9. Once the landing gear (11) is secured, the gear foam cover (12) can be installed as shown with just
a small spot of glue.
11. Install your 9g servo’s of choice into the molded pockets on the underside of the wing by guiding the
wires through into the center of the fuselage and securing in place with some glue as shown below.
12
11
13
14 16
16
10. Locate the tail wheel assembly and install as detailed below using the supplied M2x5mm screws.
KIT ONLY
08
12. Glue the aileron control horn in place and connect the Z bend push rods (20) as shown. Ensure that your
servo horns are at 90 degree’s to the wing at this stage.
13. Your 9g rudder and elevator servo of choice can now be glued in place in the pre-molded pockets on
either side of the rear fuselage. NOTE, you must ensure your servo leads are long enough to reach the front
of the model, you may need to add extension leads so please check.
15
15
3
4
2
20
20
KIT ONLY
KIT ONLY
Indice
Altri manuali Durafly Giocattolo
Durafly
Durafly T-28 TROJAN Manuale utente
Durafly
Durafly EDGE 540 V3 Manuale utente
Durafly
Durafly SlowPoke Manuale utente
Durafly
Durafly TUNDRA V2 Manuale utente
Durafly
Durafly ZEPHYR V-70 EDF-EPO Manuale utente
Durafly
Durafly GLOSTER GLADIATOR MK1 Manuale utente
Durafly
Durafly Bonanza Manuale utente
Durafly
Durafly Tomahawk Manuale utente
Durafly
Durafly Das Ugly Stik Manuale utente
Durafly
Durafly Auto-G2V2 Manuale utente
Durafly
Durafly Excalibur V2 Manuale utente
Durafly
Durafly PRIME TUNDRA Manuale utente
Durafly
Durafly EXCALIBUR Manuale utente
Durafly
Durafly P-51D OLD CROW Manuale elenco delle parti
Durafly
Durafly Retro Series Junior models Plug and Fly Manuale utente
Durafly
Durafly GOBLIN Manuale utente
Durafly
Durafly Curtiss P-40N Manuale utente
Durafly
Durafly Sky Mule Manuale utente
Durafly
Durafly Micro Tundra PNF Manuale utente
Durafly
Durafly EFXTRA Manuale utente
