Duratool D03232 Manuale utente
1
Model: D03232
and
1CH 0-15V DC 2A REGULATED POWER SUPPLY
Model: D03233
1CH 0-18V DC 3A REGULATED POWER SUPPLY
2
Please read these instructions carefully before use and retain for future reference
.
WHAT’S INCLUDED
• Power supply with xed power cord D03232.
• Power cord - D03233 only
• Operating manual.
• One pair of connection cables.
1. Voltage indicator
2. Current indicator
3. Positive output terminal
4. Negative output terminal
5. Mains power switch
6. Current adjustment control
7. Voltage adjustment control
IMPORTANT SAFETY INFORMATION
FEATURES
1
2
34
5
6
7
• Check that the voltage indicated on the rating plate corresponds with that of the
local network before connecting the product to the mains power supply.
• When using electrical appliances basic safety precautions should always be
followed.
• Please operate according to this manual, otherwise the protection provided by the
device will be impaired or fail.
• There are no user-serviceable parts in this product. Refer servicing to qualied
personnel.
• Do not operate this product with a damaged plug or cord, after a malfunction or
after being dropped or damaged in any way.
• Check the product before use for any damage. Should you notice any damage on
the cable or casing, do not use.
• This product must be earthed using the mains power cord ground connection.
Children should be supervised to ensure that they do not play with the product.
• Always disconnect from the mains when the product is not in use or before
cleaning.
• Do not use the product for any purpose other than that for which it is designed.
• Do not operate or store in an environment of high humidity or where moisture may
enter the product as this can reduce insulation and lead to electric shock.
• Do not cover or in any way obstruct the cooling vents or the rear fan grille on
D03233.
3
• Connect to the mains supply and switch the power on.
• Connect the device you wish to power to the output terminals using the included
connection leads observing the correct polarity.
• Adjust the upper control to the DC voltage output you require. The upper LCD will
display the setting.
• Adjust the lower control for the current required. The lower LCD will display the
setting.
OPERATION
MAINTENANCE
SPECIFICATIONS
• Periodically wipe the case with damp cloth and mild detergent. Do not use
abrasives or solvents for cleaning. Disconnect from the mains supply rst.
• Clean the connection leads occasionally, as dirt on the clips and plugs can affect
power transmission.
• Take care to avoid scratching the glass displays when cleaning the LCD.
Model D03232 D03233
Input voltage 220V~50Hz
Output voltage 0-15V DC 0-18V DC
Output current 0-2A 0-3A
Voltage regulation CV≤1x10-4+3mV
CC≤2x10-3+3mA
Load regulation CV≤1x10-4+3mV
CC≤2x10-3+3mA
Ripple and noise CV<1mVrms
CC<3mArms
Protection Current limiting
Voltage indication accuracy 1%+1d
Current indication accuracy 1%+1d
Ambient temperature 0-40oC
Cooling Heat sink Thermostat
controlled fan
Humidity <80%
Dimensions W x H x D 95 x 150 x 260mm 95 x 150 x 240mm
Weight 3kg 4kg
4
INFORMATION ON WASTE DISPOSAL FOR CONSUMERS OF
ELECTRICAL & ELECTRONIC EQUIPMENT
These symbols indicate that separate collection of Waste Electrical and Electronic Equipment
(WEEE) or waste batteries is required. Do not dispose of these items with general household
waste. Separate for the treatment, recovery and recycling of the materials used. Contact your
local authority for details of the battery and WEEE recycling schemes available in your area.
Made in China. PR2 9PP
Man Rev 1.0
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Duratool Alimentazione elettrica
