DURKOPP ADLER 550-867 Manuale operativo
550-867
Additional Instructions
Fingerprint scanner
All rights reserved.
Property of Dürkopp Adler AG and protected by copyright. Any reuse of these contents,
including extracts, is prohibited without the prior written approval of Dürkopp Adler AG.
Copyright © Dürkopp Adler AG 2019
IMPORTANT
READ CAREFULLY BEFORE USE
KEEP FOR FUTURE REFERENCE
Table of Contents
Additional Instructions 550-867 - 01.0 - 02/2019 1
1 General information ................................................................... 3
2 Setting up the fingerprint scanner............................................ 4
2.1 Determining the software version ................................................. 4
2.2 Updating the software................................................................... 5
2.3 Connecting the fingerprint scanner............................................... 9
2.4 Setting up the USB port.............................................................. 11
2.5 Activating the fingerprint scanner ............................................... 13
3 Operation................................................................................... 15
3.1 Creating a new user using fingerprint detection ......................... 15
3.2 Logging in using the fingerprint scanner..................................... 21
4 Deactivating the fingerprint scanner ...................................... 23
Table of Contents
2Additional Instructions 550-867 - 01.0 - 02/2019
General information
Additional Instructions 550-867 - 01.0 - 02/2019 3
1 General information
Machines of the 550-867 class can be retrofitted with a fingerprint scanner.
Users will then have 3 different options to log into the system.
• using a hand scanner and barcode
• via software
• using the fingerprint scanner
Components of the kit
Check whether the scope of delivery for kit 0867 590914 is correct prior to
setup and connection.
Fig. 1: Components of the kit
Quantity Description
1 Fingerprint scanner with USB port
1 USB key with the latest software
1 Additional Instructions 550-867 fingerprint scanner
(1) - Fingerprint scanner
①
Setting up the fingerprint scanner
4Additional Instructions 550-867 - 01.0 - 02/2019
2 Setting up the fingerprint scanner
2.1 Determining the software version
Order
1. Determine the software version.
2. Update the software version if necessary (p. 5).
3. Connect the fingerprint scanner (p. 9).
4. Set up the USB port (p. 11).
5. Activate the fingerprint scanner (p. 13).
Software versions V16.8 and later make it possible to insert a fingerprint
scanner into the machine. Determining the software version that has been
installed does not require that a user be logged in. The process does not
require a particular security level.
Fig. 2: Determining the software version (1)
To determine which software version has been installed:
1. Tap on the machine name 550-867 XE6 at the top right corner of the
start screen.
The display switches to:
Setting up the fingerprint scanner
Additional Instructions 550-867 - 01.0 - 02/2019 5
Fig. 3: Determining the software version (2)
The installed software version is displayed.
2. Confirm with OK to close the window.
If the software version is older than version V16.8 (status March 2017),
update the software version (p. 5).
2.2 Updating the software
Order
1. Determine the software version (p. 4).
2. Update the software version.
3. Connect the fingerprint scanner (p. 9).
4. Set up the USB port (p. 11).
5. Activate the fingerprint scanner (p. 13).
Software versions V16.8 and later make it possible to insert a fingerprint
scanner into the machine.
For software versions V16.7 and earlier, the software MUST be updated
for the fingerprint scanner to function properly.
Information
The latest software version has been included on the USB key.
To update the software on the control panel:
1. Switch on the machine (Operating Instructions).
2. Log in with security level 2.
The display switches to:
Setting up the fingerprint scanner
6Additional Instructions 550-867 - 01.0 - 02/2019
Fig. 4: Updating the software (1)
3. Tap the Exit button on the start screen.
The display switches to:
Fig. 5: Updating the software (2)
4. Confirm with Yes.
Important
It is absolutely necessary that you confirm the message with Yes instead
of with PC down. This is the only way to exit the program and leave
the control panel switched on. The program must not be open while the
software is being updated.
The control panel shows the Windows user interface.
5. Connect the USB key at the control panel.
Setting up the fingerprint scanner
Additional Instructions 550-867 - 01.0 - 02/2019 7
6. Display the data stored on the USB key.
The USB key holds the following files:
•sab_867.exe
•Options.txt
•Messages.csv
•Messages.txt
•Messages.xlsx
7. Minimize the window.
sab_867.exe
8. Click on the Windows Start button.
9. Select the following path from the options shown to the right of the Start
menu: Computer-->Local Disk (C:)-->SABSoft
This folder already houses a .exe file named sab_867 and a .txt file
named Options.
Information
These old files sab_867 and Options must be replaced with new files of
the same name, which are stored on the USB key. If you do not wish to
delete the old files, you need to save them under a different name or in a
different location. Otherwise, the new files of the same name will overwrite
the old files.
10. Rename the old file sab_867 if necessary.
11. Copy the new file sab_867 from the USB key to the folder SABSoft.
Unless renamed previously, the old file sab_867 will now be
replaced by the new file sab_867.
Important
The NEW software MUST be named sab_867 for the fingerprint scanner
to work.
Options.txt
12. Rename the old file Options if necessary.
13. Copy the new file Options from the USB key to the folder SABSoft.
Unless renamed previously, the old file Options will now be
replaced by the new file Options .
Important
The NEW software MUST be named Options for the fingerprint scanner
to work. Do not change the entries in the Options.txt file.
Setting up the fingerprint scanner
8Additional Instructions 550-867 - 01.0 - 02/2019
Messages.csv and Messages.txt and Messages.xlsx
14. Open the folder SystemDB:
Computer-->Local Disk (C:)-->SABSoft-->SystemDB
The folder SystemDB may already contain the 3 Message files
mentioned above.
Information
These 3 old Message files must be replaced or added by copying the new
files of the same name from the USB key.
If the files already exist and you do not wish to delete them, you need to
save them under a different name. Otherwise, the new files will overwrite
the old files.
15. If necessary, rename the files Messages.csv, Messages.txt and
Messages.xlsx.
16. Copy the new files Messages.csv, Messages.txt and
Messages.xlsx from the USB key to the folder SystemDB.
Important
The NEW files MUST be named Messages.csv, Messages.txt and
Messages.xlsx for the fingerprint scanner to work. Do NOT change the
3 Messages files.
17. Close all windows.
18. Restart the program of the machine with a double click.
The software has been updated.
You can now connect the fingerprint scanner (p. 9).
Altri manuali per 550-867
3
Indice
