Duro 155 Manuale utente

Art.155

Thank you for purchasing this Duro product.

12 months limited warranty

This product (the “Product”) is warranted to the original purchaser for twelve (12)

months from the date of purchase to be free of structural and mechanical defects due

to faulty material or workmanship. If a structural or mechanical defect occurs during

the warranty period, DURO or its designee will repair or replace the defective part(s)

of the Product, at its own option.

Warranty Service

Warranty service may be obtained by contacting Duro Sales & Service Centre or your

local distributor with your name, eWarranty Acknowledgment , original sales receipt

and a description of the problem.

See Duro International Pte Ltd ofﬁce contact information noted on the back of this

Owner’s Manual.

eWarranty Registration

To be eligible for warranty coverage, the original purchaser must register the product

online at www.duro.com.sg within 14 days from the date of purchase.

WARNING

This product is not intended for the secure storage of all materials. Items such as

ﬁrearms, other weapons, combustible materials, or medication should NOT be stored

in this unit.

WARNING

Your safe is only part of your total security protection.

DURO recommends that you store your safe in closets, ofﬁces, bedrooms and any

other locations that are convenient for you but out of direct line of sight from prying

eyes. The location of the safe does not affect the safe’s ability to protect your

valuables inside.

WARNING

Batteries

To power the lock, four (4) alkaline AA batteries (not included) are required.

Note: Non-alkaline and rechargeable batteries ARE NOT RECOMMENDED.

Please change your batteries periodically before it leaks. Warranty will be void when

battery leakage occurs.

ENTERRESET /

Backspace

LED

Display

Auxiliary

Battery Port

Key Lock

Cap

Top Panel:

Contents Include:

- Security safe

- Bolt-down screws (4)

- Master Override keys (2)

- Auxiliary Battery Pack

Requires 4 AA Batteries (not included)

- Owner’s Manual

Factory setting code: 1234

Preparing the safe for ﬁrst time use

1) Install 4 AA batteries into the Auxiliary Battery Pack, remove cover of Auxiliary

Battery Port and insert plug.

2) Input Factory Setting Code 1234 The LED Display will show if the code is valid,

then . When the code is wrong, it will show E(Error-Code).

3) Lift open the top panel by the Handle Grip.

4) Remove the Auxiliary Battery Pack from the port and re-install the port cover.

5) Install batteries into the Battery Compartment on the underside of the top panel.

Now you can use the safe without external power supply.

Handle

Grip

Changing your Personal Code

1) Use two or more ﬁngers, touch the number pad to activate the safe. Enter your 4-6

digit Personal Code and press #. The LED Display will show , then . It will

ﬂash the Personal Code again. The locking bolts will engage at the same time.

2) Activate the safe. Enter your 4-6 digit Personal Code. The LED Display will show

, then . The locking bolts will dis-engage.

WARNING

Test your code several times before putting valuables inside.

Do no remove Override Key in the UNLOCK position.

Changing your Master Code

1) With the safe in open position, press 888888 and . The LED Display will ﬂash .

You will hear 1 short beeps.

2) Enter your new 6 digit Master Code and press #. When the LED Display ﬂash

, enter your new Master Code and press #. You will hear 2 short beeps.

When the LED Display ﬂash , you had successfully changed the Master Code.

The Master Code will remain when you change the Personal Code.

You are strongly advised to change this Factory Master Code.

The Master Code can override your Personal Code programmed and open the safe.

Factory Master Code: 888888

To lock your safe

Use two or more ﬁngers, touch the number pad to activate the safe. Enter your 4-6

digit Personal Code and press #. The LED Display will show , then . It will

ﬂash the Personal Code again. The locking bolts will engage at the same time.

If you press #within 10 minutes after opening your safe, the safe will lock with your

last entered Personal Code.

If you were to lock your safe 10 minutes after opening, you have to enter your

Personal Code and press #.

To unlock your safe

1) Activate the safe. Enter your 4-6 digit Personal Code. The LED Display will show

, then . The locking bolts will dis-engage.

“Hidden Code” mode

Press #to trigger the mode. The LED Display will flash .

In this mode, the LED Display will flash when you enter your Personal Code.

To exit the mode, press #. The LED Display will flash OFF.

“Hold” mode

The safe automatically enters a 30 minutes “Hold” mode after an invalid code has

been entered 3 consecutive times. In this mode, the safe will not respond to any key

and the LED Display will ﬂash ,where the 30 is the holding time.

After 30 minutes, the safe will return to normal operation.

Override Key

If the electronic lock fails, or you do not have the Personal Code available, you may use

the Override Key to open the safe.

Remove the Key Lock Cap and insert the Override Key. Turn anti-clockwise and lift up

the top panel.

www.duro.com.sg

Duro International Pte Ltd

61, Kaki Bukit Ave 1,

#04-33, Shun Li Industrial Park,

Singapore 417943.

CAUTION

DO NOT keep the override keys inside this safe.

Note:

Bolting / unbolting of the safe is at the expense and discretion of the owner. DURO or

your local distributor is not responsible for any cost incurred if the safe is to be moved

or replaced.

Reprograming safe lock after Override Key use

1) Leave Override Key in unlocked position.

2) Touch the number pad to activate the safe.

3) Press 1234 #. The LED Display will ﬂash . Turn Override Key clockwise to engage

the locking bolts.

4) Activate the safe and press 1234 # to dis-engage the locking bolts. The safe is now

returned to normal operation.

To lock the safe, enter you 4-6 digit Personal Code and press #.

Bolt-Down the safe

1) Select a suitable and convenient location for your safe.

2) Open your safe and remove the carpet. Secure the safe into position with the

Bolt-down Screws through the pre-drilled holes at the bottom of the safe.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Duro Sicuro

Duro

Duro 133 Manuale utente

Manuali Sicuro popolari di altre marche

Squire

Squire Stronghold Keysafe Manuale utente

Phoenix

Phoenix FS0352C Scheda informativa del prodotto

Phoenix

Phoenix KS0030E Series Manuale utente

Vaultek

Vaultek 10 Series Scheda tecnica

Arregui

Arregui CLASS Manuale utente

Beaumont

Beaumont SMART KEYBOX Manuale utente

Honeywell

Honeywell 2077D - 1.21 Cubic Foot Anti-Theft Safe Manuale utente

Hornady

Hornady SnapSafe Trunk Safe II Manuale utente

SPORTS AFIELD

SPORTS AFIELD SA-HD5-BIO Manuale utente

Honeywell

Honeywell 5912 Manuale utente

Phoenix

Phoenix FS1280F Manuale utente

Phoenix

Phoenix SS0992K Scheda informativa del prodotto

Technomax

Technomax Trony Series Manuale

SPORTS AFIELD

SPORTS AFIELD INSTINCT BIOMETRIC Series Manuale utente

RICHTER CZECH

RICHTER CZECH LA Manuale operativo

Olymp

Olymp GOsafe 110 Manuale utente

Phoenix

Phoenix SS0100E Scheda informativa del prodotto

Clarke

Clarke Strong-Arm CS1000K Manuale di istruzioni