DVDO EDGE Manuale utente
DVDO EDGE
High Definition Video Processor & Hub
Product Manual
Version 1.0
1
Important Safety Information
Never operate this product with the top cover removed.
High Voltages are present inside the enclosure which present
an electrical shock hazard. Never operate this product with
the top cover removed.
Do not expose this product to water or other liquids.
Never insert objects through the vent holes on the top cover.
High voltages are present inside the enclosure which present
an electrical shock hazard.
No user serviceable parts inside the enclosure. Contact Customer
Support for servicing.
2
Customer Support Information
email: [email protected]
phone: 1-877-382-EDGE (1-877-382-3343)
web site: www.dvdo.com/edge
Check the web site for news and updates for your DVDO EDGE
To learn about VRS Video Processing Technology, visit
http://www.anchorbaytech.com/vrs_technology/
DVDO by Anchor Bay Technologies
983 University Avenue, Building A
Los Gatos, California 95032 USA
3
Table of Contents
Safety Information 2
Customer Support Information 3
Table of Contents 4
Section 1: Introduction and Feature Summary
Introduction: What will DVDO EDGE do for you? 6
Using DVDO EDGE in a Home AV System 7
DVDO EDGE Feature Summary 10
Rear Panel Connections 11
Section 2: Set Up
Set Up your DVDO EDGE: Summary 15
Set Up your DVDO EDGE -- Details: Output Connections 16
Display Wizard 17
Input Wizard 20
Section 3: Remote and On-Screen Menus
Using the Remote to Control your EDGE 23
Menus and User Interface 24
Menu Organization 25
Menus: Main Menu 26
Select Input 27
Zoom and Pan 30
Aspect Ratio 35
Picture Controls 36
Brightness 37
Contrast 38
Color Saturation 39
Hue 40
Detail Enhancement 41
EDGE Enhancement 42
Mosquito Noise Reduction 43
4
Table of Contents (continued)
Settings Menu 45
Output Format 46
Switching Output Formats 47
Underscan 48
Input Priority 49
Audio Settings 50
Rename Inputs 53
Game Mode 54
Factory Defaults 55
Section 4: Cables
Video Cables 56
Audio Cables 60
Which Cable Should I Use? 61
Input Cables: Video Cable Hierarchy 62
Section 5: Remote Control: Universal Remote Overview 63
Programming the Remote 67
1. Programming with preprogrammed codes 67
2. Programming with the Learning Method 70
3. Programming with Advanced Functions 72
Remote Control Code Tables 75
5
Section 1: Introduction
Section 1: Introduction: What will DVDO EDGE do for you?
DVDO EDGE will improve the quality of your experience with your home audio and video system.
EDGE achieves this by acting as an intelligent central switching hub and video processor. It connects all of your audio/video
source devices to your high definition TV and AV receiver. It makes switching from one component to another simple, and it comes
with a Universal Remote so that you can manage all the components in your system with one control.
Most home audio video setups consist of a number of separate components that must be connected together. The task of
connecting, configuring, optimizing and operating the system is left to the user. EDGE excels at handling these tasks for you.
DVDO EDGE is a unique product that helps to simplify your system’s interconnections, while delivering ease of use and world
class video processing to your high definition television. The more components your system has, the more you benefit from the
simplification and performance that DVDO EDGE can deliver.
EDGE features a number of technical innovations. EDGE is based on the ABT2010 video processing chip. This chip incorporates
VRS high performance video processing developed for the company’s line of Home Theater Video Processors, including the DVDO
VP 50 Pro. The chip delivers outstanding picture quality at new low price point. Ease of use features include automatic input
switching, based on predetermined priority, so switching audio/video sources is as simple as powering on a component. Controls
for Aspect Ratio, Zoom, and Picture Controls are customizable for each input.
EDGE features dual HDMI output connectors, one for video/audio and a 2nd dedicated audio HDMI connector. This configuration
delivers optimal performance and ease of use in a system that included both a digital display and an AV Receiver. EDGE
communicates with your display to obtain its preferred format, then automatically adjusts its processing to produce to match the
display’s preferred format.
EDGE also communicates with your AV Receiver to learn its audio capabilities, then combines display information and
communicates system capability back to the source components, which provide optimized output. You can let EDGE manage your
system or if you prefer, you can manually control your system through EDGE. Either way, EDGE makes it easier.
DVDO Edge is a result of a vision: Using a home Audio/Video system, with high definition video and surround sound audio should
be and can be much easier.
6
Section 1: Introduction
Using DVDO EDGE in a Home System AV System
The illustration above shows a basic home audio/video system using DVDO EDGE. The components on the left are “sources.”
Sources are DVD Players, set top boxes, or any other component that produces an audio and video signal. These audio and video
signals connect to the inputs of the EDGE, and the output of the EDGE connect to a TV. The EDGE switches audio and video
signals, and provides image processing to match the incoming video formats to the preferred format of the TV.
The source components may use a variety of different signal formats and cabling. EDGE can accept practically all commonly used
cabling, and can handle a mix of cabling and format types. In the illustration above, two of the sources have HDMI outputs, while
the third one uses an older analog audio and video interface. Three sources are shown above, EDGE can accept up to ten.
7
Section 1: Introduction
Using DVDO EDGE in a Home System AV System (continued)
EDGE is optimized for use in a system with an AV Receiver as shown above. It has a dedicated audio HDMI output port, and an
Optical audio output for AV Receivers without HDMI. EDGE accepts audio and video from the source components, then routes
video to the TV and audio to the AV Receiver. Switching source components is simple; EDGE handles the audio and video routing
details.
EDGE provides automatic, intelligent communication between the source devices on the left, and the TV and AV Receiver on the
right. EDGE will automatically adjust its internal processing to produce the preferred video format of your digital TV or display.
8
Section 1: Introduction
Using DVDO EDGE in a Home System AV System (continued)
EDGE comes with a DVDO Universal Remote. It controls EDGE, and it can control up
to seven other components in your system, including your TV, your AV Receiver and
your source components.
Once you have set up your system and programmed your remote, you can use this
single remote for the day to day control of your system. You will need the other
remotes during setup or for specialized functions.
DVDO Universal Remote has advanced Punchthrough and Macro features that make
operation of your system simpler. These features let you control your system in a
more natural way, by function instead of by component.
For example, if you want to control your sound volume, you can simply press the
Volume UP/Down buttons without having to remember which component in your
system controls sount volume.
The Punchthrough feature works with other functions, including Channel Selection,
and the Play--Stop--Pause--Fast Forward--Fast Reverse group.
The Macro function is useful when you find yourself using a sequence of button
presses over and over. Macros allow the combination of a sequence of button
presses into a single button. A Macro is often used to combine a series of power
commands into a single button, for one-button power-on or power-off of some or all of
the components in your system.
You can program Punchthrough and Macro functions as part of your system setup.
9
Section 1: Introduction
DVDO EDGE Feature Summary
Accepts inputs from up to 10 video sources and 10 audio sources.
Outputs video and audio to your digital TV via HDMI.
Dedicated audio HDMI output routes audio to your AV Receiver.
Separate Optical digital audio output for AV Receivers that don’t have HDMI.
Allows use of the highest quality video format your TV can accept and the highest quality audio format your
AV Receiver can accept.
Converts video formats from any video input to the highest quality format your TV can support.
Outstanding video quality using the ABT2010 video processor chip.
Links audio and video inputs so they can be switched together.
Intuitive on-screen Menus for controlling and configuring your system.
Automatically switches inputs using preprogrammed priority. Alternatively, the user may manually switch inputs using the
remote or through the On-Screen Menus.
Wizard guides you through setup of new TVs, receivers, or input devices.
User programmable audio/video lip sync; up to 200mS delay.
Simple Aspect Ratio controls available on the remote to through the On-Screen Menus.
Picture Controls, Aspect Ratio, Game Mode, and Zoom are individually configurable for each video
input.
Backlit DVDO Universal Remote controls all the components in your system.
10
Altri manuali per EDGE
2
Indice
Altri manuali DVDO Convertitore multimediale
DVDO
DVDO EDGE Manuale utente
DVDO
DVDO DVD VCR Combo Guida alla configurazione
DVDO
DVDO iScanPlus V2 Manuale utente
DVDO
DVDO iScan VP20 Istruzioni operative
DVDO
DVDO High Definition Video Processor & Hub Edge Manuale utente
DVDO
DVDO DVDO-Splitter-14-SE Manuale utente
DVDO
DVDO iScan VP50PRO Manuale utente
DVDO
DVDO DVDO-DAConv-1 Manuale utente
DVDO
DVDO iScan VP20 Manuale utente
DVDO
DVDO iScan Duo Manuale utente
