DW DWC-D1362D Manuale utente

Before installing and using the camera, please read this manual carefully.

Be sure to keep it handy for future reference.

ABOUT MANUAL

User Manual

DWC-D1362D / D1363D / D1363D922

Indoor Dome Camera

11192010

e camera please read this manual carefully

e camera please read this manual care

GGDonot open or modify.

GGDonot open the case except during maintenanceand installation,

for it may bedangerous and can cause damages.

GDonot put objects into the unit.

GGGG

or other damages.

GGGBe careful when handling the unit.

Toprevent damages, do not drop the camera or subjectit to shockor vibration.



Protectfrom humidity and dust.

Protectfrom high temperature.



Be careful when installing near the ceiling of akitchen or aboiler room,as the temperature may rise to

high levels.

Cleaning

Toremovedirt from the case, moisten asoft cloth with asoft detergent solution and wipe.

Mounting Surface

The material of the mounting surfacemust bestrong enough to support the camera.GGGGGGGGGGGGGGGGGGGGGGGGGGGG

PRECAUTIONS

This equipment has been tested and found to complywith the limits for aClass Bdigital device, pursuant

to Part 15 of the FCC rules. These limits are designed to provide reasonableprotection against harmful

interference, when the equipment is operated in aresidential environment. This equipment generates, uses,

and radiates radio frequencyenergy; and if it is not installed and used in accordancewith the instruction

manual,it may cause harmful interferenceto radio communications.

WARNING:

FCC COMPLIANCE

Before sending your camera for repair, checkthe following or contactour technical specialist.

No Video

Checkthe coaxial cableand make sure it is connected securely.

Checkthe lens’ iris adjustment at the menu setup of the camera.

Checkthe power supplyand make sure the camera has the proper voltage and current.

Out-of-Focus Video

Checkthe lens manual focal and zoom adjustment. Fieldtest monitor is recommended.

TROUBSHOOTING

1/3”Sony Super HAD CCD

540TV Lines

3.3~12mm Varifocal Auto Iris Lens

Electronic Day and Night

DRC (Dynamic Range Compressor)

HME (Highlight Masking Exposure)

SLC (Side Light Compensation)

AGC / BLC / AWB

NegativeImaging

Mirror Image Control

FEATURES*- D1362D

RS485 Built-In

ProgrammablePrivacyZone (4) & Motion Detection

Easy Icon Driven OSD Menu with Built-InJoystick

Secondary Video-BNC Output

1/3”Sony Super HAD II CCD

GGHigh Resolution 560 TVLines



3.3~12mm Varifocal Auto Iris Lens [D1363D]

9~22mm Varifocal Auto Iris Lens [D1363D922]

Electronic Day and Night

Star-Light (Super LowLight Technology)

DRC (Dynamic Range Compressor)

3D-DNR (3D Digital Noise Reduction)

HME (Highlight Mask Exposure)

Negative Imaging

AGC /BLC /AWB

Programmable Privacy Zone (6)&Motion Detection

Easy Icon Driven OSD Menu with Built-In Joystick

Auto Sensing 12VDC or 24VAC with Line Lock

Secondary Video-BNC Output

FEATURES*- D1363D,D1363D922

DIMENSIONS INMILLIMETERS*

85.0

46.5

23.8

R43.0

82.5

88.0

5.0

7.0

46.588.0

VIDEO (YELLOW)

BNC JACK

REDDC12V&AC24V

BLACK 0.2 INCHES(0.5mm)

TWIST SOLDERING

POWER REQUIREMENT*

Maximum Wire Distance

Wire Gauge 12VDC 24VAC

24 AWG 80ft 323ft

22 AWG 128ft 513ft

20 AWG 203ft 815ft

18 AWG 323ft 1295ft

16AWG 514ft 2056ft

14 AWG 816ft 3264ft

12AWG 1295ft 5183ft

10AWG 2057ft 8228ft

Coaxial Cable Type Maximum Distance

RG59/U 750ft

RG6/U 1,000ft

RG11/U 1,500ft

Power Requirement

12VDC at 1A

24VAC at 500mA

INSTALLATION*

Included with Digital Watchdog Camera:

1.User Manual

2. Mounting Template

3.Security L-Key

4.SingleSided Hex Key

5.Secondary BNC Cablefor aFieldMonitor

6. Two(2) Screwsand Two(2) Dry Wall Anchors

Camera Installation

Use the Mounting Templage (2) when mounting the camera.

Use the Security L-Key (3) to loosen the TwoScrews(6) that secure the dome cover. Removethe

dome cover to access the inner screw holes used to mount the camera.

NOTE

INSTALLATION*

A.Loosen the Fixing Screws(A),using the L-Key.

B. Separate the Upper Case (B) from the Base (F).

C.Loosen the Inner Screws(C),using ascrew driver.

D.Detachthe Gimbal (D) from the Base (F).

E.Cut aholein the ceiling for routing the cables.

F.Placethe Base (F) horizontallyagainst the ceiling.

Drill the screw holes at the twomarked positions.

G.Pass the Power Cable(E) and Video Cable(G) from the

camera unit through the cableholein the ceiling.

H.Align the screw holes of the camera unit with the

holes in the ceiling. Secure the camera with

the twoInner Screws(C).

I.Fix the Gimbal (D) to the Base (F).

J.Install and adjust the camera unit.

K.Adjust the dome to show the lens through the

camera window.

L.. Attachthe Upper Case (B) and the Base (F).

M.Tighten the Fixing Screws(A) to fasten the Upper

Case(B) to the Base (F).

CONNECTION*

DC12V / AC24V

LENS ADJUSTMENT*

A.Adjust the Pan (360°) and Tilt(60°) positions.

B. Use the Zoom Lever to set the zoom position.

C.Use the Focus Lever to set the focus.

360°

60°

Questo manuale è adatto per i seguenti modelli

Indice

Manuali Telecamera di sicurezza popolari di altre marche

Okina USA

Okina USA SIR36-870VF650LP Manuale utente

Divio

Divio NDR155PA Manuale utente

Canon

Canon VB-C500D Manuale utente

Easy Access

Easy Access EasyGuard Manuale utente

Vivotek

Vivotek FD9389-EHV-v2 Manuale utente

TUYA

TUYA COSMO W2 Manuale utente

Eusso

Eusso UNC7500-IR Guida all'installazione

urmet domus

urmet domus 1096/204 Manuale utente

VC VC20 series Manuale utente

Axis

Axis Q1614 Manuale utente

ieGeek

ieGeek DD201 Manuale utente

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuale utente

Vicon

Vicon V662-D-1 Istruzioni operative

Grundig

Grundig GCH-K0274P Manuale utente

Lorex

Lorex VANTAGE LBC7032 Manuale utente

4xem

4xem WPT Manuale utente

Samsung

Samsung SCV-3082 Manuale utente

Vitek

Vitek VTC-C544 Manuale utente