Dwarf Connection DC-LINK-CLR2 Manuale utente
DC-LINK-CLR2
Long Range Wireless HDMI/SDI HD Video Transmission Suite for Indoor use
Manual / Handbuch
Introduction
Congratulations on purchasing the DC-LINK-CLR2 Video Transmission System.
Please read this manual carefully before operating your product, and ensure it is
kept in a safe place.
The technology contained in this product, including the device itself as well as
related software and trademarks, is protected by law. Any duplication or
reproduction without the written permission of the copyright owner is prohibited, in
part or in full. All third-party brands or copyrights mentioned in this manual are the
property of their respective owners.
This product has a limited warranty of one year. Warranty may be voided by:
Physical damage to the product
Any damage caused by improper use, maintenance or storage
Damage resulting from the use of incorrect power supplies
Damage not related to the design of the product or the quality of its
manufacture
!2 !
Safety Precautions
The Video Transmission System
Do not block or obstruct air vents, as this may cause short circuits, fire or electric
shocks. Turn the device off immediately if it comes into contact with liquids.
The Power Supply
The device may be used with batteries or AC-DC power supplies of the voltage
specified on the device or in the enclosed documentation.
If batteries are used, please ensure that the batteries are compatible and have
no cracks or leaks.
Please use the enclosed power adapter. When using a third-party power adapter,
please ensure that the adapter conforms to the specifications of the device and has
the correct polarity.
Remove the power supply if:
-The device will not be used for an extended period of time
-The power cable is damaged
-The exterior of the device is damaged.
Operating Environments
-Due to current regulations governing the use of radio-based systems, this
device is authorised for indoor use with the pre-installed channels five and six
(by law, “indoor use” is defined as use in a building including places
assimilated thereto in which the shielding will typically provide the necessary
attenuation).
-Do not place the device on metallic surfaces, to ensure effective data transfer.
-Do not place the device on dirty or damp surfaces.
-Do not use the device in the proximity of water or in high humidity, near
open fires or gas pipes, or near electrical mains.
ENGLISH
! !3
Overview
The DC-LINK-CLR2 is a high-performance WHDI video transmission system
which transmits uncompressed video and audio signals up to 1000m with low
latency (1 ms delay).
Due to the conscious decision not to implement the DFS (Dynamic Frequency
Selection) System, which is compulsory for outdoor use, the device has a longer
range, greater stability and better usability than comparable systems, but is
only authorised for indoor use.
Transmitter and receiver both have 3G-HD-SDI and HDMI connectors (Plug & Play).
When a video source is attached, the transmitter automatically selects the input
(SDI is prioritised). The receiver’s 3G-HD-SDI and HDMI outputs may be used
simultaneously.
!4 !
Characteristics
1000m Range
Transmission ranges of up to 1000m are possible with good line-of-sight and
optimum antenna positioning
Rapid and Reliable Connectivity
The decision not to implement the DFS System compulsory for outdoor use, as well as the
preinstalled transmission channels, mean there is no need for complex pairing procedures.
In addition, transmission stability is increased
Real-Time Transmission
With a latency of less than 1ms, the system is suitable for live monitoring applications
Uncompressed Transmission
10-bit, 4:2:2 transmissions via 3G-SDI and HDMI without format conversion
Supports Formats up to and including 1080p 60Hz
2- Channel Audio Transmission
Embedded audio transmission on CH1 & CH2 via SDI and HDMI, incl. formats such as
Dolby TrueHD, DTS-Master etc.
License-free Frequency Band
Functions in the license-free 5GHz ISM frequency range from 5.1-5.9GHz
Multicast Support
1:1 or 1:n transmissions with up to four parallel systems
Metadata- and Timecode Transmission
AES-128 Encryption
Metal Casing
Transmitter and receiver are extremely durable
Variable Input Voltage
Input voltage range from 9.0-18.0V DC allows the system to be operated with a variety
of batteries or power supplies
Status Displays
Status displays for DC power, video and RSSI signal strength
Mount
1/4" tripod mount
Battery Adapter Plate
Delivered with NPF/V-Mount battery plates as standard
Plug-and-Play Design
Ready to use without the need for complex configuration
1
Y
e
a
r
M
a
n
u
f
a
c
t
u
r
e
r
’
s
G
u
a
r
a
n
t
e
e
ENGLISH
! !5
Product Description
Transmitter:
1) ¼“ Tripod Mount
2) Antenna Connection: SMA (male) Connector
3) Menu button: Unlock/lock screen
4) Control button: Press to change the channels
5) LCD screen: Display channel, power level,
temperature info.
6) ON-OFF: Power Switch
7) SDI-IN: 3G/HD/SD-SDI Input, (BNC Female Connector)
8) SDI LOOP-OUT: 3G/HD/SD-SDI Output, (BNC Female Connector)
9) HDMI-IN: HDMI Input (Type A Female Connector)
10) DC-IN: 9 – 18V DC
11) Mini USB: For firmware upgrade use.
!6
Product Description
Receiver:
ENGLISH
1) ¼“ Tripod Mount
2) Antenna Connection: RP-SMA (male) Connector
3) RSSI Status Display: Signal Strength
4) Menu button: Unlock/lock screen
5) Control button: Press to change the channels
6) LCD screen: Display channel, BAT voltage, temperature
info.
7) ON-OFF: Power Switch
8) HDMI-OUT: HDMI Output (Type A Female Connector)
9) Dual SDI-OUT: 3G/HD/SD-SDI Output, (BNC Female Connector)
10) DC-IN: 9.0 – 18.0V DC
11) Mini USB: For firmware upgrade use.
! !7
Operation
Transmitter
1. Connect the two omni-directional antennas to the SMA male connectors.
2. There is a ¼“ tripod mount at the base of the transmitter if required.
3. Use the enclosed 4-pin male-to-D-TAP cable to connect to a power supply with
a suitable voltage.
Receiver
1. There is a ¼“ tripod mount at the base of the receiver if required.
2. Use the enclosed 4-pin male-to-D-TAP cable to connect to a power supply with
a suitable voltage.
3. Ensure you have selected the frequency that corresponds to that of the
transmitter.
Signal Distribution
Connect the camera’s SDI or HDMI output to the transmitter’s SDI or HDMI input. If both
SDI and HDMI inputs are active, the transmitter will prioritise the SDI signal.
Connect the receiver’s SDI or HDMI output to the SDI or HDMI input of the
monitoring/recording device. During active transmission, both the SDI and the HDMI
output on the receiver can be used simultaneously.
Ensure that the antennas are connected firmly, that all other connections are stable,
and that the batteries are suitable.
!8 !
Operation
Antenna Positioning
ENGLISH
Position the antennas on transmitter and receiver at right angles as shown in the
illustration. This ensures the best possible RF performance.
Install the transmitter and the receiver as high as possible (at least 1.5 metres
above ground level), to maintain a good line-of-sight. During operation, try to keep
the transmitter and the receiver at similar heights.
Avoid obstacles such as walls, trees, water and steel structures between
transmitter and receiver as much as possible.
The connection is at its strongest when the flat surfaces of the transmitter and
receiver face each other (see illustration).
! !9
Operation
Altri manuali per DC-LINK-CLR2
1
Indice
Altri manuali Dwarf Connection Estensione
