Dyna-Glo DGB610SSP Manuale utente
1
Français p. XX
Español p. XX
6-BURNER
LP GAS GRILL
WITH SIDE BURNER
Model #DGB610SSP
ATTACH YOUR RECEIPT HERE
Serial Number _____________________________ Purchase Date ______________________
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 1-877-447-4768, 8:30 a.m. – 4:30 p.m., CST, Monday – Friday
Français p. 33
Español p. 65
70-10-128 Rev. 10/23/17
2
Assembler/Installer: This manual contains important information necessary for the proper
assembly and safe use of this appliance. Read and follow all warnings and instructions before
assembling and using this appliance. Leave these instructions with the consumer .
Consumer/User: Follow all warnings and instructions when using this appliance.
Retain these instructions for future reference.
TABLE OF CONTENTS
Safety Information ...................................................................................................................... 3
Package Contents ...................................................................................................................... 5
Hardware Contents .................................................................................................................... 6
Preparation ................................................................................................................................. 6
Assembly Instructions ................................................................................................................ 7
Operation Instructions ................................................................................................................. 19
Care and Maintenance ................................................................................................................. 24
Troubleshooting ........................................................................................................................... 27
Warranty ...................................................................................................................................... 29
Replacement Parts List .............................................................................................................. 30
If you smell gas:
1. Shut off gas to the appliance.
2. Extinguish any open ame.
3. Open lid.
4. If odor continues, keep
away from the appliance and
immediately call your local re
department.
1. Do not store or use gasoline
or other ammable liquids or
vapors in the vicinity of this or
any other appliance.
2. An LP (liquid propane) cylin-
der not connected for use shall
not be stored in the vicinity of
this or any other appliance.
3. This grill is for outdoor use
only and shall not be used in
a building, garage, under
overhangs or any other
enclosed area.
4. Do not leave a lit grill unat-
tended. Keep children and pets
away from the grill at all times.
WARNING
DANGER
3
DANGER
CAUTION
• Do not use in an explosive atmosphere. Keep grill area clear and free from combustible
materials, gasoline and other ammable vapors and liquids.
Please read and understand this entire manual before attempting to assemble, operate or install
the product. If you have any questions regarding the product, please call customer service at:
1-877-447-4768, 8:30 a.m. – 4:30 p.m., CST, Monday – Friday.
• Never use charcoal or lighter uid with the grill.
• Do not use gasoline, kerosene or alcohol for lighting.
• The LP gas cylinder used with this appliance must be:
(a) Constructed and marked in accordance with the Specications for LP-Gas Cylinders
of the U.S. Department of Transportation (D.O.T.) or the National Standard of Canada,
CAN/CSA-B339, Cylinders, Spheres and Tubes for Transportation of Dangerous Goods;
and Commission, as applicable; and
(b) Provided with a listed overlling prevention device.
(c) Provided with a cylinder connection device compatible with the connector for outdoor
cooking appliances. This grill is not intended to be used in or installed on recreational
vehicles and/or boats.
• Never keep a lled container in a hot car or car trunk. Heat will cause the gas pressure to
increase, which may open the relief valve and allow gas to escape.
• Always open grill lid slowly and carefully as heat and steam trapped within the grill can burn
you severely.
SAFETY INFORMATION
4
SAFETY INFORMATION
• Do not place the grill under overhead
combustible construction or awnings.
Minimum clearance from sides and
back of unit to combustible construction,
36 inches (914.4mm) from sides and
back.
NOTE: The installation must conform with
local codes or, in the absence of local
codes, with either the National Fuel Gas
Code, ANSI Z223.1/NFPA 54, Natural
Gas and Propane Installation Code, CSA
B149.1, or Propane Storage and
Handling Code, B149.2.
CAUTION
• Do not store or use gasoline or other ammable liquids or vapors in the vicinity of this or any
other appliance.
• An LP cylinder not connected for use shall not be stored in the vicinity of this or any other
appliance.
• This grill is for use with propane gas only (propane cylinder not included).
• Never attempt to attach this grill to the self-contained propane system of a boat, camper trailer,
motor home or house.
• Do not attempt to move the grill while it is lit or when it is hot. The casters should be locked
when not moving the grill.
• Do not use the grill unless it is completely assembled and all parts are securely fastened and
tightened.
• Keep all combustible items and surfaces at least 36 inches (91.44 cm) away from the grill at all
times.
• Do not touch metal parts of grill until it has completely cooled (about 45 minutes) to avoid
burns, unless you are wearing protective gear (pot holders, gloves, BBQ mittens, etc…).
• Do not alter this grill in any manner.
• Clean and inspect the hose before each use. If there is evidence of abrasion, wear, cuts, or
leaks, the hose must be replaced prior to operating the appliance. The replacement hose
assembly will be that which is specied by the manufacturer.
• Move gas hoses as far away as possible from hot surfaces and dripping hot grease.
• Keep the grill’s valve compartment, burners and circulating air passages clean. Inspect the
grill before each use. Do not obstruct the ow of gas or ventilation air.
• The use of alcohol, prescription or non-prescription drugs may impair the operator’s ability
to properly assemble or safely operate the grill.
• Do not leave a lit grill unattended. Keep children and pets away from the grill at all times.
• Do not place this grill on any type of tabletop surface. The grill should be placed on a at and
level surface.
• Do not use the grill in high winds.
WARNING
36in 36in
914.4mm
914.4mm
5
PACKAGE CONTENTS
PART DESCRIPTION QTY
A Hood Handle 1
B Temp Gauge 1
CGrill Body Assembly 1
D Control Knob 7
E Warming Rack 1
F Cooking Grate 3
GHeat Tent 6
H Control Knob Bezel 1
I Side Burner 1
JLeft Side Table Assembly 1
K Right Side Burner Body Assembly 1
L Grease Pan 1
M Grease Cup 1
N Door Handle 2
PART DESCRIPTION QTY
O Cart Left Side Panel Assembly 1
PLeft Door Assembly 1
Q Tank Exclusion 1
R Upper Front Door Brace 1
S Cylinder Rear Block Bar 1
T Cart Rear Panel 1
U Cart Bottom Shelf 1
V Cart Bottom Shelf Front Facing 1
W Magnet 1
X Locking Swivel Caster 2
Y Non-Locking Swivel Caster 2
ZRight Door Assembly 1
A1 Cart Right Side Panel Assembly 1
B1 Side Burner Rack 1
C
D
A
E
J
L
N
O
M
P
Q
R
V
T
S
U
D
W
Y
X
GI
B1
Z
A1
H
K
FB
N
6
HARDWARE CONTENTS
M10-M6
Wrench
Qty. 1
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list on previous page and hardware contents above. If any part is missing or damaged, do
not attempt to assemble the product. Contact customer service for replacement parts.
Estimated Assembly Time: 50 minutes with 2 people.
Tools Required for Assembly and Leak Testing (not included): Phillips screwdriver, Spray bottle,
Pliers, Adjustable Wrench
CAUTION
THIS UNIT IS HEAVY. Two people required for safe assembly.
Two people required for safe assembly. Some parts may contain sharp edges. Wear protective
gloves if necessary. Read and follow all safety statements, warnings, assembly instructions and
use and care instructions before attempting to assemble and use.
GG
M6x16
Bolt
Qty. 36
AA
M6
Spring
Washer
Qty. 16
BB
M6
Plain
Washer
Qty. 16
CC
M4x10
Bolt
Qty. 8
DD
M6
Wingnut
Qty. 2
FFEE
Door
Upper
Hinge
Pin
Qty. 2
7
ASSEMBLY INSTRUCTIONS
1. Attach the cart bottom shelf front facing (V) to
the cart bottom shelf (U) with two M6x16 bolts
(AA), and loosen the tank screw on the cart
bottom shelf (U), keep about 5mm clearance
with the ange in the tank nesting hole
as shown.
Hardware Used
M6x16 Bolt x 2
2. Attach the cart left side panel assembly (O)
and the cart right side panel assembly (A1)
to the cart bottom shelf front facing (V) and the
cart bottom shelf (U) with six M6x16 bolts (AA),
M6 spring washers (BB), M6 plain
washers (CC).
Hardware Used
2
AA
1
V
U
O
CC
A1
V
AA
U
BB
5mm
AA
AA M6x16 Bolt x 6
BB M6 Spring Washer x 6
CC M6 Plain Washer x 6
8
ASSEMBLY INSTRUCTIONS
3. Attach the two locking swivel casters (X) and
the two non-locking swivel casters (Y) to the
cart left side panel assembly (O) and the cart
right side panel assembly (A1) with
the M10-M6 wrench (GG).
Hardware Used
GG M10-M6 Wrench x 1
3
X
A1
O
Y
4. Attach the cart rear panel (T) to the cart left
side panel assembly (O) and the cart right side
panel assembly (A1) with the four M6x16 bolts
(AA), M6 spring washers (BB), and M6 plain
washers (CC).
4
T
O
BB
A1
CC
AA
X
Hardware Used
AA M6x16 Bolt x 4
BB M6 Spring Washer x 4
CC M6 Plain Washer x 4
9
ASSEMBLY INSTRUCTIONS
6. Attach the magnet (W) to the cart bottom shelf
(U) with two M4x10 bolts (DD) 6
O
CC
A1
BB
U
W
5. Attach the upper front door brace (R) to the cart
left side panel assembly (O) and the cart right
side panel assembly (A1) with four M6x16 bolts
(AA), M6 spring washers (BB), and M6 plain
washers (CC).
5R AA
Hardware Used
AA M6x16 Bolt x 4
BB M6 Spring Washer x 4
CC M6 Plain Washer x 4
DD
Hardware Used
DD M4x10 Bolt x 2
10
ASSEMBLY INSTRUCTIONS
8. Attach the tank exclusion (Q) to the cart left
side assembly (O) and the cart bottom shelf (U)
with two M4x10 bolts (DD).
7. Attach the cylinder rear block bar (S) to the
cart left side panel assembly (O) and the cart
right side panel assembly (A1) with two
M6x16 bolts (AA).
7
8
S
O
AA
A1
O
Hardware Used
AA M6x16 Bolt x 2
QU
DD
Hardware Used
DD M4x10 Bolt x 2
Indice
Lingue:
Altri manuali Dyna-Glo Bruciatore
